Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1811.01067 · Physical Review Applied

Universal Model for the Turn-On Dynamics of Superconducting Nanowire Single-Photon Detectors

Kathryn L. Nicolich, Clinton Cahall, Nurul T. Islam, Gregory P. Lafyatis, Jungsang Kim, Aaron Miller, Daniel J. Gauthier

Published Sep 11, 2019• 32 citations
arXivHTMLPDF

Abstract

Superconducting nanowire single-photon detectors (SNSPDs) are widely used in quantum information science and quantum optics because of their excellent properties, yet much of their dynamical behavior still is not fully understood. This study identifies characteristic time and resistance scales for the SNSPD detection process, and uses them to develop a universal model of SNSPD behavior. The authors furthermore clarify how different detector parameters affect the output signal, specifically exploring the effects of photon number, detector length, and bias current. These results will have an impact on SNSPD fabrication and encourage innovative applications of these sensors.

DOI
10.1103/physrevapplied.12.034020

Related papers

Universal turn-on dynamics of superconducing nanowire single-photon detectors

Kathryn L. Nicolich, Clinton Cahall, Nurul T. Islam +4 more

We model the turn-on dynamics of superconducting nanowire single-photon detectors (SNSPDs), predicting that the rising edge of the readout signal encodes photon number, nanowire length and detector bias current, and experimentally verify these predictions.

Quantum Information and Measurement (QIM)•Jan 1, 2019•0 citations

Modeling the effect of superconductor properties on sensitivity and responsivity of superconducting nanowire single photon detector

S. Haldar, Arun Sehrawat, Krishna Balasubramanian

Superconducting nanowire single photon detector (SNSPD) is a leading candidate for applications requiring the fundamental limit of light detection at high detection rates. While SNSPD technology employing nanowires from conventional low temperature superconducting detectors is mature with several commercial solutions, other material options with higher transition temperature approaching liquid nitrogen with faster signal responses are actively being explored. In this context, we develop a comprehensive model that predicts the final potential response from an SNSPD incorporating several physical and material aspects. A phase diagram of photon detection is developed that describes the latching phases and the photon sensitivity as a function of biasing current and temperature for both low temperature and high temperature superconductors. On the one hand, while low temperature superconductors are observed to be more sensitive than high temperature superconductors (HTSs) under any given biasing condition, a biasing window for a single photon detection with HTS nanowires is identified. On the other hand, HTS nanowires demonstrate three orders of magnitude faster response times than the low temperature superconductor nanowire at the same biasing condition, making it uniquely suited for several practical applications.

Journal of Applied Physics•Nov 6, 2024•4 citations

A distributed electrical model for superconducting nanowire single photon detectors

Qingyuan Zhao, Daniel F. Santavicca, Di Zhu +2 more

© 2018 Author(s). To analyze the switching dynamics and output performance of a superconducting nanowire single photon detector (SNSPD), the nanowire is usually modelled as an inductor in series with a time-varying resistor induced by the absorption of a photon. Our recent experimental results show that, due to the effect of kinetic inductance, for a SNSPD made of a nanowire of sufficient length, its geometrical length can be comparable to or even longer than the effective wavelength of frequencies contained in the output pulse. In other words, a superconducting nanowire can behave as a distributed transmission line so that the readout pulse depends on the photon detection location and the transmission line properties of the nanowire. Here, we develop a distributed model for a superconducting nanowire and apply it to simulate the output performance of a long nanowire designed into a coplanar waveguide. We compare this coplanar waveguide geometry to a conventional meander nanowire geometry. The simulation results agree well with our experimental observations. With this distributed model, we discuss the importance of microwave design of a nanowire and how impedance matching can affect the output pulse shape. We also discuss how the distributed model affects the growth and decay of the photon-triggered resistive hotspot.

•Jan 1, 2018•10 citations

Improving superconducting nanowire single-photon detectors made of NbTiN using a novel method to characterize the timing jitter (Conference Presentation)

Rasmus Flaschmann, Lucio Zugliani, Christian Schmid +10 more

In recent years, Superconducting Nanowire Single-Photon Detectors (SNSPDs) have obtained tremendous attention as a possible key technology for photonic quantum processing and faint light detection. Here, we present our recent progress on engineering of the properties of NbTiN SNSPDs fabricated on various substrates measured. We discuss approaches to simultaneously improve the most important figures of merit (DCR, dead time, timing jitter, efficiency) as well as efficient characterization methods. Specifically, for the latter we investigate the impact of the substrate material on the performance parameters as well as the fundamental interrelation of the resulting voltage pulse properties, such as pulse height, rise time and timing jitter, and their dependence on the applied bias current.

Quantum Nanophotonic Materials, Devices, and Systems•Oct 4, 2022•0 citations

Direct measurement of the recovery time of superconducting nanowire single-photon detectors

Claire Autebert, Gaëtan Gras, Emna Amri +4 more

One of the key properties of single-photon detectors is their recovery time, i.e., the time required for the detector to recover its nominal efficiency. In the case of superconducting nanowire single-photon detectors (SNSPDs), which can feature extremely short recovery times in free-running mode, a precise characterization of this recovery time and its time dynamics is essential for many quantum optics or quantum communication experiments. We introduce a fast and simple method to characterize precisely the recovery time of SNSPDs. It provides full information about the recovery of the efficiency in time for a single or several consecutive detections. We also show how the method can be used to gain insight into the behavior of the bias current inside the nanowire after a detection, which allows predicting the behavior of the detector and its efficiency in any practical experiment using these detectors.

arXiv:2003.06290•Journal of Applied Physics•Aug 20, 2020•28 citations

Modeling and Development of Superconducting Nanowire Single-Photon Detectors

Jason P. Allmaras

Superconducting nanowire single-photon detectors (SNSPDs) have demonstrated remarkable efficiency, timing resolution, and intrinsic dark count rate properties, but the SNSPD community currently lacks a comprehensive model of the single-photon detection process. In this work, we conduct a detailed examination of the current detection mechanism models and compare their predictions to new experimental measurements of the intrinsic timing properties and polarization dependence of specialized NbN test devices. First, we consider the energy downconversion cascade using the kinetic equations to describe the non-equilibrium electron and phonon systems immediately following photon absorption. These calculations provide estimates for the energy loss and fluctuations during this process, and provide qualitative information about the way energy is partitioned between the electron and phonon systems. To study the suppression of superconductivity following downconversion, we apply the most advanced existing model, that of Vodolazov (2017), but find it inadequate to quantitatively describe the timing properties of these detectors. By extending the model to use the generalized time-dependent Ginzburg-Landau equations, we achieve better quantitative agreement with experiment. However, the generalized model still provides only a qualitative picture of the detection process. We also conduct an experimental examination of the heat transfer process in WSi nanowires by examining the nanowire reset dynamics, steady-state dissipation, and crosstalk between elements of an array. The results are compared to existing electrothermal models, but these models fail to adequately describe the dynamics of the system. A generalized form of the electrothermal model provides better fitting to experiment, but incorporation of non-equilibrium effects is likely needed to provide a fully quantitative description of the system. These results are directly connected to some of the thermal challenges of SNSPD array development. Informed by the crosstalk results, we demonstrate a new multiplexing technique based on thermal coupling between two active nanowire layers, known as the thermal row-column. This method promises to enable kilopixel to megapixel scale imaging arrays for low photon-flux applications. Finally, we discuss the design and characterization of the ground detector for the Deep Space Optical Communication (DSOC) demonstration mission.

•Jun 1, 2020•4 citations
Superconducting nanowire single-photon detectors (SNSPDs) are widely used in quantum information science and quantum optics because of their excellent properties, yet much of their dynamical behavior still is not fully understood. This study identifies characteristic time and resistance scales for the SNSPD detection process, and uses them to develop a universal model of SNSPD behavior. The authors furthermore clarify how different detector parameters affect the output signal, specifically exploring the effects of photon number, detector length, and bias current. These results will have an impact on SNSPD fabrication and encourage innovative applications of these sensors.
Superconducting nanowire single photon detector (SNSPD) is a leading candidate for applications requiring the fundamental limit of light detection at high detection rates. While SNSPD technology employing nanowires from conventional low temperature superconducting detectors is mature with several commercial solutions, other material options with higher transition temperature approaching liquid nitrogen with faster signal responses are actively being explored. In this context, we develop a comprehensive model that predicts the final potential response from an SNSPD incorporating several physical and material aspects. A phase diagram of photon detection is developed that describes the latching phases and the photon sensitivity as a function of biasing current and temperature for both low temperature and high temperature superconductors. On the one hand, while low temperature superconductors are observed to be more sensitive than high temperature superconductors (HTSs) under any given biasing condition, a biasing window for a single photon detection with HTS nanowires is identified. On the other hand, HTS nanowires demonstrate three orders of magnitude faster response times than the low temperature superconductor nanowire at the same biasing condition, making it uniquely suited for several practical applications.
© 2018 Author(s). To analyze the switching dynamics and output performance of a superconducting nanowire single photon detector (SNSPD), the nanowire is usually modelled as an inductor in series with a time-varying resistor induced by the absorption of a photon. Our recent experimental results show that, due to the effect of kinetic inductance, for a SNSPD made of a nanowire of sufficient length, its geometrical length can be comparable to or even longer than the effective wavelength of frequencies contained in the output pulse. In other words, a superconducting nanowire can behave as a distributed transmission line so that the readout pulse depends on the photon detection location and the transmission line properties of the nanowire. Here, we develop a distributed model for a superconducting nanowire and apply it to simulate the output performance of a long nanowire designed into a coplanar waveguide. We compare this coplanar waveguide geometry to a conventional meander nanowire geometry. The simulation results agree well with our experimental observations. With this distributed model, we discuss the importance of microwave design of a nanowire and how impedance matching can affect the output pulse shape. We also discuss how the distributed model affects the growth and decay of the photon-triggered resistive hotspot.
In recent years, Superconducting Nanowire Single-Photon Detectors (SNSPDs) have obtained tremendous attention as a possible key technology for photonic quantum processing and faint light detection. Here, we present our recent progress on engineering of the properties of NbTiN SNSPDs fabricated on various substrates measured. We discuss approaches to simultaneously improve the most important figures of merit (DCR, dead time, timing jitter, efficiency) as well as efficient characterization methods. Specifically, for the latter we investigate the impact of the substrate material on the performance parameters as well as the fundamental interrelation of the resulting voltage pulse properties, such as pulse height, rise time and timing jitter, and their dependence on the applied bias current.
One of the key properties of single-photon detectors is their recovery time, i.e., the time required for the detector to recover its nominal efficiency. In the case of superconducting nanowire single-photon detectors (SNSPDs), which can feature extremely short recovery times in free-running mode, a precise characterization of this recovery time and its time dynamics is essential for many quantum optics or quantum communication experiments. We introduce a fast and simple method to characterize precisely the recovery time of SNSPDs. It provides full information about the recovery of the efficiency in time for a single or several consecutive detections. We also show how the method can be used to gain insight into the behavior of the bias current inside the nanowire after a detection, which allows predicting the behavior of the detector and its efficiency in any practical experiment using these detectors.
Superconducting nanowire single-photon detectors (SNSPDs) have demonstrated remarkable efficiency, timing resolution, and intrinsic dark count rate properties, but the SNSPD community currently lacks a comprehensive model of the single-photon detection process. In this work, we conduct a detailed examination of the current detection mechanism models and compare their predictions to new experimental measurements of the intrinsic timing properties and polarization dependence of specialized NbN test devices. First, we consider the energy downconversion cascade using the kinetic equations to describe the non-equilibrium electron and phonon systems immediately following photon absorption. These calculations provide estimates for the energy loss and fluctuations during this process, and provide qualitative information about the way energy is partitioned between the electron and phonon systems. To study the suppression of superconductivity following downconversion, we apply the most advanced existing model, that of Vodolazov (2017), but find it inadequate to quantitatively describe the timing properties of these detectors. By extending the model to use the generalized time-dependent Ginzburg-Landau equations, we achieve better quantitative agreement with experiment. However, the generalized model still provides only a qualitative picture of the detection process. We also conduct an experimental examination of the heat transfer process in WSi nanowires by examining the nanowire reset dynamics, steady-state dissipation, and crosstalk between elements of an array. The results are compared to existing electrothermal models, but these models fail to adequately describe the dynamics of the system. A generalized form of the electrothermal model provides better fitting to experiment, but incorporation of non-equilibrium effects is likely needed to provide a fully quantitative description of the system. These results are directly connected to some of the thermal challenges of SNSPD array development. Informed by the crosstalk results, we demonstrate a new multiplexing technique based on thermal coupling between two active nanowire layers, known as the thermal row-column. This method promises to enable kilopixel to megapixel scale imaging arrays for low photon-flux applications. Finally, we discuss the design and characterization of the ground detector for the Deep Space Optical Communication (DSOC) demonstration mission.