Abstract Analog quantum simulations offer rich opportunities for exploring complex quantum systems and phenomena through the use of specially engineered, well-controlled quantum systems. A critical element, increasing the scope and flexibility of such experimental platforms, is the ability to access and tune in situ different interaction regimes. Here, we present a superconducting circuit building block of two highly coherent transmons featuring in situ tuneable photon hopping and nonlinear cross-Kerr couplings. The interactions are mediated via a nonlinear coupler, consisting of a large capacitor in parallel with a tuneable superconducting quantum interference device (SQUID). We demonstrate the working principle by experimentally characterising the system in the single-excitation and two-excitation manifolds, and derive a full theoretical model that accurately describes our measurements. Both qubits have high coherence properties, with typical relaxation times in the range of 15 to 40 μs at all bias points of the coupler. Our device could be used as a scalable building block in analog quantum simulators of extended Bose-Hubbard and Heisenberg XXZ models, and may also have applications in quantum computing such as realising fast two-qubit gates and perfect state transfer protocols.
Abstract Analog quantum simulations offer rich opportunities for exploring complex quantum systems and phenomena through the use of specially engineered, well-controlled quantum systems. A critical element, increasing the scope and flexibility of such experimental platforms, is the ability to access and tune in situ different interaction regimes. Here, we present a superconducting circuit building block of two highly coherent transmons featuring in situ tuneable photon hopping and nonlinear cross-Kerr couplings. The interactions are mediated via a nonlinear coupler, consisting of a large capacitor in parallel with a tuneable superconducting quantum interference device (SQUID). We demonstrate the working principle by experimentally characterising the system in the single-excitation and two-excitation manifolds, and derive a full theoretical model that accurately describes our measurements. Both qubits have high coherence properties, with typical relaxation times in the range of 15 to 40 μs at all bias points of the coupler. Our device could be used as a scalable building block in analog quantum simulators of extended Bose-Hubbard and Heisenberg XXZ models, and may also have applications in quantum computing such as realising fast two-qubit gates and perfect state transfer protocols.
The ability to efficiently simulate a variety of interacting quantum systems on a single device is an overarching goal for digital and analog quantum simulators. In circuit quantum electrodynamical systems, strongly nonlinear superconducting oscillators are typically realized using transmon qubits, featuring a wide range of tunable couplings that are mainly achieved via flux-dependent inductive elements. Such controllability is highly desirable both for digital quantum information processing and for analog quantum simulations of various physical phenomena, such as arbitrary spin-spin interactions. Furthermore, broad tunability facilitates the study of driven-dissipative oscillator dynamics in previously unexplored parameter regimes. In this work, we demonstrate the ability to selectively activate different dynamical regimes between two strongly nonlinear oscillators using parametric modulation. In particular, our scheme enables access to regimes that are dominated by photon-hopping, two-mode squeezing, or cross-Kerr interactions. Finally, we observe level repulsion and attraction between Kerr-nonlinear oscillators in regimes where the nonlinearities exceed the coupling strengths and decay rates of the system. Our results could be used for realizing purely analog quantum simulators to study arbitrary spin systems as well as for exploring strongly nonlinear oscillator dynamics in previously unexplored interaction regimes.
Superconducting quantum circuits typically use capacitive charge-based linear coupling schemes to control interactions between elements such as qubits. While simple and effective, this coupling scheme makes it difficult to satisfy competing circuit design requirements such as maintaining large qubit anharmonicity and coherence along with a high degree of qubit connectivity and packing density. Moreover, tunable interactions using linear coupling elements produce dynamical variations in mode hybridization, which can induce non-adiabatic transitions, resulting in leakage errors and limiting gate speeds. In this work we attempt to address these challenges by proposing a junction-based coupling architecture based on SQUID (superconducting quantum interference device) couplers with relatively small Josephson energies. SQUID couplers provide intrinsic cross-Kerr interactions that can be controlled by external fluxes and that do not rely on mode hybridization. The small Josephson energies of the coupler maintain the interaction at a perturbative scale, which limits undesired higher-order mixing between coupled elements while achieving a sufficiently strong cross-Kerr interaction originating from diagonal coupling elements. Based on these properties, we show that a SQUID coupler can be used to implement a fast, adiabatic, and high-fidelity controlled-Z gate without introducing extra modes, and the operation is robust against junction asymmetry for high-frequency qubits. Although unconventional crosstalk may arise due to junction asymmetries and parasitic hybridization with spectator qubits, we show that these effects are sufficiently small for realistic circuit parameters. As an example of the utility of such junction-based coupling schemes, we present a scalable tiling strategy for a miniaturized superconducting quantum processor based on merged-element transmon qubits.
Josephson junctions are a fundamental building block of superconducting quantum circuits. They provide the nonlinearity required to realize quantum bits and enable a wide range of nonlinear phenomena central to quantum technologies. This thesis explores two superconducting systems in which this nonlinearity plays a central role. In the first part, we investigate a superconducting resonator terminated by a superconducting quantum interference device (SQUID), an arrangement of two Josephson junctions connected in parallel. The SQUID provides a tunable Kerr nonlinearity and allows the resonator to be driven parametrically. Under the combined action of the parametric drive, Kerr nonlinearity, and dissipation to the environment, the state of the resonator can undergo abrupt changes as the pump frequency or amplitude is varied. We interpret these changes within the framework of dissipative phase transitions (DPTs). By implementing a finite-component thermodynamic limit, we experimentally and theoretically investigate both first- and second-order DPTs in this system. We characterize their steady-state and dynamical signatures, including squeezing below vacuum, phase coexistence, hysteresis, spontaneous symmetry breaking, and critical slowing down. Finally, we exploit the enhanced susceptibility near the second-order critical point to implement a frequency-estimation protocol. We show that the estimation precision scales quadratically with the effective system size, demonstrating that finite-component DPTs can provide a quantum advantage in a sensing protocol. In the second part, we investigate a novel architecture for the readout of superconducting qubits. Conventional dispersive readout relies on a transverse interaction between a transmon and a resonator, which can lead to Purcell decay and measurement-induced state transitions, ultimately limiting the readout fidelity. To overcome these limitations, we implement a nonlinear coupling by galvanically connecting the transmon and resonator through a Josephson junction. This interaction provides a strong cross-Kerr coupling for clear state discrimination, but also introduces a detrimental transverse interaction. We experimentally show that the exchange part of the transverse interaction can be suppressed by adding a capacitor in parallel with the coupling junction while preserving the strong cross-Kerr coupling. In addition, we show that the same circuit acts as an intrinsic Purcell filter, protecting the qubit against Purcell decay. The coupling junction also induces a Kerr nonlinearity in the resonator, which we exploit to implement a bifurcation readout with a 99.4 % fidelity in a 68 ns integration time. This performance is achieved without a dedicated Purcell filter or a near-quantum-limited amplifier. Overall, this thesis demonstrates the engineering of nonlinear superconducting circuits to investigate dissipative phase transitions, exploit criticality for enhanced quantum sensing, and develop a novel qubit readout architecture enabling fast, high-fidelity measurement.
The key components in superconducting quantum computing architectures are qubits, couplers, microwave elements and low-noise amplifiers among others. In a variety of these subsystems, nonlinear circuit elements are an essential ingredient which enables their functionality. In this thesis, we study two different superconducting elements used to implement nonlinear capacitors. First we simulated a novel Josephson-junction-based tuneable nonlinear capacitor to couple flux qubits. Such a device implements a YY interaction, which has the potential to enhance the performance and extend the capabilities of current generation quantum annealers. We show that the interaction strength of the YY coupling is on the order of MHz and tuneable across zero. We discuss experimental realisations of this device to verify its function. Next, we present our study of a low temperature parametric amplifier utilizing the nonlinear capacitance of quantum phase-slip nanowires. We have fabricated a single-nanowire and two-nanowire variants which shunt a quarter-wavelength superconducting coplanar waveguide resonator. We characterised the nonlinear properties of the first variant such as the power-dependent resonance frequency, idler generation and signal gain, while in the second variant we developed a lock-in detection method to investigate the gate voltage response and demonstrate that the device acts as a gate-voltage-tuneable resonator. We also report on the progress towards a fabrication process for sputtered Al overlap junctions in the LCN cleanroom. Back-sputter and in-situ oxide growth techniques are developed as an alternative to shadow evaporation. These techniques are better suited for large-scale integration as they do not rely on angular deposition, but they require better control over the interfaces due to patterning the two electrodes separately. We characterised the processes using resistance measurements and characterised their low temperature properties. We show that our junctions exhibit overdamped dynamics and the critical current is suppressed with RF radiation.
We report the experimental realization of strong longitudinal (ZZ) coupling between two superconducting transmon qubits achieved solely through capacitive engineering. By systematically varying the qubit frequency detuning, we measure cross-Kerr inter-qubit interaction strengths ranging from 10 MHz up to 350 MHz, more than an order of magnitude larger than previously observed in similar capacitively coupled systems. In this configuration, the qubits enter a strong-interaction regime in which the excitation of one qubit inhibits that of its neighbor, demonstrating a dynamical blockade mediated entirely by the engineered ZZ coupling. Circuit quantization simulations accurately reproduce the experimental results, while perturbative models confirm the theoretical origin of the energy shift as a hybridization between the computational states and higher-excitation manifolds. We establish a robust and scalable method to access interaction-dominated physics in superconducting circuits, providing a pathway towards solid-state implementations of globally controlled quantum architectures and cooperative many-body dynamics.
Abstract We theoretically investigate the photon statistical properties of a weakly-driven circuit quantum electrodynamic system with a cross-Kerr nonlinearity, which is built from two coupled transmon qubits through a superconducting quantum interference device (SQUID). We show that when two resonators are resonant with each other, photon blockade and sub-Poissonian photon statistics in the first superconducting transmission line resonator (TLR), TLR1, can be achieved by modulating the resonator-driving detunings and the cross-Kerr nonlinearity. Moreover, the optimal conditions for obtaining sub-Poissonian statistics are put forward through analytical derivations, which are in good agreement with those obtained by numerical simulations. We also examine the role of the resonator–resonator hopping interaction for photon statistics in TLR1 by numerically analyzing the case where the frequencies of two resonators are far detuned from each other. Due to the cutoff of the indirect transition paths in this case, the output field always acquires super-Poissonian statistics. In addition, a physical model with a SQUID embedded in TLR1 is proposed to tune the detuning between two TLRs, making it possible to demonstrate the importance of the resonator–resonator hopping interaction in obtaining a single-photon blockade. Thereby, our model of two coupled resonators with cross-Kerr nonlinearity has the potential to engineer the photon statistics through operating on the system parameters.