Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Dissipative Phase Transitions and Qubit Readout with Nonlinear Superconducting Resonators

Guillaume Beaulieu

Published Jan 1, 2026• 0 citations
Publisher

Abstract

Josephson junctions are a fundamental building block of superconducting quantum circuits. They provide the nonlinearity required to realize quantum bits and enable a wide range of nonlinear phenomena central to quantum technologies. This thesis explores two superconducting systems in which this nonlinearity plays a central role. In the first part, we investigate a superconducting resonator terminated by a superconducting quantum interference device (SQUID), an arrangement of two Josephson junctions connected in parallel. The SQUID provides a tunable Kerr nonlinearity and allows the resonator to be driven parametrically. Under the combined action of the parametric drive, Kerr nonlinearity, and dissipation to the environment, the state of the resonator can undergo abrupt changes as the pump frequency or amplitude is varied. We interpret these changes within the framework of dissipative phase transitions (DPTs). By implementing a finite-component thermodynamic limit, we experimentally and theoretically investigate both first- and second-order DPTs in this system. We characterize their steady-state and dynamical signatures, including squeezing below vacuum, phase coexistence, hysteresis, spontaneous symmetry breaking, and critical slowing down. Finally, we exploit the enhanced susceptibility near the second-order critical point to implement a frequency-estimation protocol. We show that the estimation precision scales quadratically with the effective system size, demonstrating that finite-component DPTs can provide a quantum advantage in a sensing protocol. In the second part, we investigate a novel architecture for the readout of superconducting qubits. Conventional dispersive readout relies on a transverse interaction between a transmon and a resonator, which can lead to Purcell decay and measurement-induced state transitions, ultimately limiting the readout fidelity. To overcome these limitations, we implement a nonlinear coupling by galvanically connecting the transmon and resonator through a Josephson junction. This interaction provides a strong cross-Kerr coupling for clear state discrimination, but also introduces a detrimental transverse interaction. We experimentally show that the exchange part of the transverse interaction can be suppressed by adding a capacitor in parallel with the coupling junction while preserving the strong cross-Kerr coupling. In addition, we show that the same circuit acts as an intrinsic Purcell filter, protecting the qubit against Purcell decay. The coupling junction also induces a Kerr nonlinearity in the resonator, which we exploit to implement a bifurcation readout with a 99.4 % fidelity in a 68 ns integration time. This performance is achieved without a dedicated Purcell filter or a near-quantum-limited amplifier. Overall, this thesis demonstrates the engineering of nonlinear superconducting circuits to investigate dissipative phase transitions, exploit criticality for enhanced quantum sensing, and develop a novel qubit readout architecture enabling fast, high-fidelity measurement.

DOI
10.5075/epfl-thesis-11801

Related papers

Fast, high-fidelity Transmon readout with intrinsic Purcell protection via nonperturbative cross-Kerr coupling

Guillaume Beaulieu, Jun-Zhe Chen, Marco Scigliuzzo +5 more

Dispersive readout of superconducting qubits relies on a transverse capacitive coupling that hybridizes the qubit with the readout resonator, subjecting the qubit to Purcell decay and measurement-induced state transitions (MIST). Despite the widespread use of Purcell filters to suppress qubit decay and near-quantum-limited amplifiers, dispersive readout often lags behind single- and two-qubit gates in both speed and fidelity. Here, we experimentally demonstrate junction readout, a simple readout architecture that realizes a strong qubit-resonator cross-Kerr interaction without relying on a transverse coupling. This interaction is achieved by coupling a transmon qubit to its readout resonator through both a capacitance and a Josephson junction. By varying the qubit frequency, we show that this hybrid coupling provides intrinsic Purcell protection and enhanced resilience to MIST, enabling readout at high photon numbers. While junction readout is compatible with conventional linear measurement, in this work we exploit the nonlinear coupling to intentionally engineer a large Kerr nonlinearity in the resonator, enabling bifurcation-based readout. Using this approach, we achieve a 99.4 % assignment fidelity with a 68 ns integration time and a 98.4 % QND fidelity without an external Purcell filter or a near-quantum-limited amplifier. These results establish the junction readout architecture with bifurcation-based readout as a scalable and practical alternative to dispersive readout, enabling fast, high-fidelity qubit measurement with reduced hardware overhead.

quant-pharXiv:2601.04975•PRX Quantum•Jan 9, 2026•2 citations

Balanced Cross-Kerr Coupling for Superconducting Qubit Readout

Alex A. Chapple, Othmane Benhayoune-Khadraoui, Simon Richer +1 more

Dispersive readout, the standard method for measuring superconducting qubits, is limited by multiphoton qubit-resonator processes arising even at moderate drive powers. These processes degrade performance, causing dispersive readout to lag behind single- and two-qubit gates in both speed and fidelity. In this Letter, we propose a novel readout method, termed junction readout. Junction readout leverages the nonperturbative cross-Kerr interaction resulting from coupling a qubit and a resonator via a Josephson junction. Furthermore, by adding a capacitive coupling in parallel to the junction, Purcell decay induced by the exchange coupling can be suppressed. We also show that junction readout is more robust against deleterious multiphoton processes, and offers greater flexibility for resonator frequency allocation. Crucially, junction readout achieves superior performance compared to dispersive readout while maintaining similar hardware overhead. Numerical simulations show that junction readout can achieve fidelity exceeding 99.99% in under 30 ns of integration time, making it a promising alternative for superconducting qubit readout with current hardware.

arXiv:2501.09010•Physical Review Letters•Nov 4, 2025•7 citations

Structured Environments and Engineered Dissipation in Superconducting Circuits: Bound States, Dissipative Phase Transitions, Purcell Filtering and Power sensors

Claudia Castillo-Moreno

Superconducting circuits are a powerful platform for studying and controlling the interaction between light and matter at the quantum level. In these systems, superconducting qubits act as artificial atoms (with matter-like degrees of freedom), whereas microwave resonators play the role of oscillators hosting photons (with photonic-like degrees of freedom). A major advantage of this platform is the ability to tailor the electromagnetic environment to which the qubits are coupled. This degree of control makes it possible to realize well-known quantum optics models, like the Jaynes-Cummings model, as well as more complex systems, like quantum electrodynamics close to a bandgap. In this thesis, we engineer structured electromagnetic environments and couple superconducting qubits to them to experimentally study their interaction. By coupling multiple microwave resonators together, we create a metamaterial. When an atom interacts with the metamaterial, an atom-photon bound state emerges. We observe the dynamics of the creation and dissolution of the atom-photon bound state, as well as the spectral content of its photonic component, for the first time to our knowledge.Our metamaterial is intrinsically nonlinear because each resonator is formed by an array of Josephson junctions to serve as an inductor. When the system is pumped, its phase diagram exhibits multimode dissipative phase transitions with timescales on the order of hundred seconds. There is ongoing theoretical debate about whether such phase transitions can occur in one-dimensional systems, a question we address and resolve in this work.Furthermore, we engineer qubit decay using two different approaches. In the first one, we engineer the decay of two coupled atoms to two waveguides by using a symmetric–antisymmetric coupling configuration. This approach enables selective coupling to bright and dark states of the system. In the second one, we suppress the Purcell decay of a qubit using a compact lumped-element Purcell filter. In addition, we characterize the Purcell decay by employing an auxiliary superconducting qubit as a sensitive power detector directly coupled to the feedline waveguide used for the qubit readout.In summary, this thesis presents three different methods for controlling light–matter interactions in structured quantum systems, including decay suppression with both Purcell filters and symmetry-selective couplings. The thesis also introduces new experimental techniques for probing atom-photon bound states and provides direct evidence of collective phenomena in driven-dissipative quantum metamaterials.

•Oct 20, 2025•0 citations

Criticality-Enhanced Quantum Sensing with a Parametric Superconducting Resonator

Guillaume Beaulieu, Fabrizio Minganti, Simone Frasca +4 more

Quantum metrology, a cornerstone of quantum technologies, exploits entanglement and superposition to achieve higher precision than classical protocols in parameter-estimation tasks. When combined with critical phenomena such as phase transitions, the divergence of quantum fluctuations is predicted to enhance the performance of quantum sensors. Here, we implement a critical quantum sensor using a superconducting parametric (i.e., two-photon driven) Kerr resonator. The sensor, a linear resonator terminated by a superconducting quantum interference device, operates near the critical point of a finite-component second-order dissipative phase transition obtained by scaling the system parameters. We analyze the performance of a frequency-estimation protocol and show that quadratic precision scaling with respect to the system size can be achieved with finite values of the Kerr nonlinearity. Since each photon emitted from the cavity carries more information about the parameter to be estimated compared to its classical counterpart, our protocol opens up perspectives for faster or more precise metrological protocols. Our results demonstrate that quantum advantage in a sensing protocol can be achieved by exploiting a phase transition.

arXiv:2409.19968•PRX Quantum•Apr 1, 2025•31 citations

Observation of first- and second-order dissipative phase transitions in a two-photon driven Kerr resonator

Guillaume Beaulieu, Fabrizio Minganti, Simone Frasca +4 more

In open quantum systems, dissipative phase transitions (DPTs) emerge from the interplay between unitary evolution, drive, and dissipation. While second-order DPTs have been predominantly investigated theoretically, first-order DPTs have been observed in single-photon-driven Kerr resonators. We present here an experimental and theoretical analysis of both first and second-order DPTs in a two-photon-driven superconducting Kerr resonator. We characterize the steady state at the critical points, showing squeezing below vacuum and the coexistence of phases with different photon numbers. Through time resolved measurements, we study the dynamics across the critical points and observe hysteresis cycles at the first-order DPT and spontaneous symmetry breaking at the second-order DPT. Extracting the timescales of the critical phenomena reveals slowing down across five orders of magnitude when scaling towards the thermodynamic limit. Our results showcase the engineering of criticality in superconducting circuits, advancing the use of parametric resonators for critically-enhanced quantum information applications.

arXiv:2310.13636•Nature Communications•Mar 10, 2025•46 citations

Efficient Microwave-Photons Wave-Mixing with Superconducting Quantum Circuits

Ahmed Hajr

Quantum computing is a relatively new computing paradigm that leverages entanglement to implement algorithms beyond the reach of classical hardware. Superconducting quantum circuits have emerged as a platform to build quantum processors, with demonstrations of quantum supremacy over classical supercomputers and quantum error correction beyond fault tolerance. However, current noisy devices require significant improvements to unlock the full potential of quantum algorithms.This thesis investigates intrinsic noise channels in superconducting circuits and the design of noise-resilient qubits. By characterizing high-quality superconducting resonators, we identify lossy dielectric materials at the interfaces as the dominant loss mechanism, which we mitigate via targeted surface treatments. Subsequently, we leverage Josephson junction nonlinearity to engineer noise-biased qubits utilizing the Kerr parametric oscillator (KPO). By analyzing the efficiency of strong, far-off-resonance driving to facilitate three- and four-wave mixing processes, we demonstrate high-fidelity operations on Fock, Kerr-cat, and dual-rail qubits. For the Kerr-cat qubit, we introduce a novel 2D architecture that enables strong light-matter coupling with suppressed Purcell decay, yielding millisecond-scale bit-flip lifetimes. Within this same architecture, we demonstrate a longitudinal qubit readout with a $99.6\%$ quantum nondemolition score, alongside a high-fidelity universal single-qubit gate set, all while maintaining bit-flip error suppression. Finally, we exploit the efficient wave-mixing of strongly coupled, far-detuned KPOs to realize a dynamically protected dual-rail qubit exhibiting both erasure bias and high-fidelity single-qubit gates.

•May 1, 2026•0 citations
Josephson junctions are a fundamental building block of superconducting quantum circuits. They provide the nonlinearity required to realize quantum bits and enable a wide range of nonlinear phenomena central to quantum technologies. This thesis explores two superconducting systems in which this nonlinearity plays a central role. In the first part, we investigate a superconducting resonator terminated by a superconducting quantum interference device (SQUID), an arrangement of two Josephson junctions connected in parallel. The SQUID provides a tunable Kerr nonlinearity and allows the resonator to be driven parametrically. Under the combined action of the parametric drive, Kerr nonlinearity, and dissipation to the environment, the state of the resonator can undergo abrupt changes as the pump frequency or amplitude is varied. We interpret these changes within the framework of dissipative phase transitions (DPTs). By implementing a finite-component thermodynamic limit, we experimentally and theoretically investigate both first- and second-order DPTs in this system. We characterize their steady-state and dynamical signatures, including squeezing below vacuum, phase coexistence, hysteresis, spontaneous symmetry breaking, and critical slowing down. Finally, we exploit the enhanced susceptibility near the second-order critical point to implement a frequency-estimation protocol. We show that the estimation precision scales quadratically with the effective system size, demonstrating that finite-component DPTs can provide a quantum advantage in a sensing protocol. In the second part, we investigate a novel architecture for the readout of superconducting qubits. Conventional dispersive readout relies on a transverse interaction between a transmon and a resonator, which can lead to Purcell decay and measurement-induced state transitions, ultimately limiting the readout fidelity. To overcome these limitations, we implement a nonlinear coupling by galvanically connecting the transmon and resonator through a Josephson junction. This interaction provides a strong cross-Kerr coupling for clear state discrimination, but also introduces a detrimental transverse interaction. We experimentally show that the exchange part of the transverse interaction can be suppressed by adding a capacitor in parallel with the coupling junction while preserving the strong cross-Kerr coupling. In addition, we show that the same circuit acts as an intrinsic Purcell filter, protecting the qubit against Purcell decay. The coupling junction also induces a Kerr nonlinearity in the resonator, which we exploit to implement a bifurcation readout with a 99.4 % fidelity in a 68 ns integration time. This performance is achieved without a dedicated Purcell filter or a near-quantum-limited amplifier. Overall, this thesis demonstrates the engineering of nonlinear superconducting circuits to investigate dissipative phase transitions, exploit criticality for enhanced quantum sensing, and develop a novel qubit readout architecture enabling fast, high-fidelity measurement.
Dispersive readout of superconducting qubits relies on a transverse capacitive coupling that hybridizes the qubit with the readout resonator, subjecting the qubit to Purcell decay and measurement-induced state transitions (MIST). Despite the widespread use of Purcell filters to suppress qubit decay and near-quantum-limited amplifiers, dispersive readout often lags behind single- and two-qubit gates in both speed and fidelity. Here, we experimentally demonstrate junction readout, a simple readout architecture that realizes a strong qubit-resonator cross-Kerr interaction without relying on a transverse coupling. This interaction is achieved by coupling a transmon qubit to its readout resonator through both a capacitance and a Josephson junction. By varying the qubit frequency, we show that this hybrid coupling provides intrinsic Purcell protection and enhanced resilience to MIST, enabling readout at high photon numbers. While junction readout is compatible with conventional linear measurement, in this work we exploit the nonlinear coupling to intentionally engineer a large Kerr nonlinearity in the resonator, enabling bifurcation-based readout. Using this approach, we achieve a 99.4 % assignment fidelity with a 68 ns integration time and a 98.4 % QND fidelity without an external Purcell filter or a near-quantum-limited amplifier. These results establish the junction readout architecture with bifurcation-based readout as a scalable and practical alternative to dispersive readout, enabling fast, high-fidelity qubit measurement with reduced hardware overhead.
Dispersive readout, the standard method for measuring superconducting qubits, is limited by multiphoton qubit-resonator processes arising even at moderate drive powers. These processes degrade performance, causing dispersive readout to lag behind single- and two-qubit gates in both speed and fidelity. In this Letter, we propose a novel readout method, termed junction readout. Junction readout leverages the nonperturbative cross-Kerr interaction resulting from coupling a qubit and a resonator via a Josephson junction. Furthermore, by adding a capacitive coupling in parallel to the junction, Purcell decay induced by the exchange coupling can be suppressed. We also show that junction readout is more robust against deleterious multiphoton processes, and offers greater flexibility for resonator frequency allocation. Crucially, junction readout achieves superior performance compared to dispersive readout while maintaining similar hardware overhead. Numerical simulations show that junction readout can achieve fidelity exceeding 99.99% in under 30 ns of integration time, making it a promising alternative for superconducting qubit readout with current hardware.
Superconducting circuits are a powerful platform for studying and controlling the interaction between light and matter at the quantum level. In these systems, superconducting qubits act as artificial atoms (with matter-like degrees of freedom), whereas microwave resonators play the role of oscillators hosting photons (with photonic-like degrees of freedom). A major advantage of this platform is the ability to tailor the electromagnetic environment to which the qubits are coupled. This degree of control makes it possible to realize well-known quantum optics models, like the Jaynes-Cummings model, as well as more complex systems, like quantum electrodynamics close to a bandgap. In this thesis, we engineer structured electromagnetic environments and couple superconducting qubits to them to experimentally study their interaction. By coupling multiple microwave resonators together, we create a metamaterial. When an atom interacts with the metamaterial, an atom-photon bound state emerges. We observe the dynamics of the creation and dissolution of the atom-photon bound state, as well as the spectral content of its photonic component, for the first time to our knowledge.Our metamaterial is intrinsically nonlinear because each resonator is formed by an array of Josephson junctions to serve as an inductor. When the system is pumped, its phase diagram exhibits multimode dissipative phase transitions with timescales on the order of hundred seconds. There is ongoing theoretical debate about whether such phase transitions can occur in one-dimensional systems, a question we address and resolve in this work.Furthermore, we engineer qubit decay using two different approaches. In the first one, we engineer the decay of two coupled atoms to two waveguides by using a symmetric–antisymmetric coupling configuration. This approach enables selective coupling to bright and dark states of the system. In the second one, we suppress the Purcell decay of a qubit using a compact lumped-element Purcell filter. In addition, we characterize the Purcell decay by employing an auxiliary superconducting qubit as a sensitive power detector directly coupled to the feedline waveguide used for the qubit readout.In summary, this thesis presents three different methods for controlling light–matter interactions in structured quantum systems, including decay suppression with both Purcell filters and symmetry-selective couplings. The thesis also introduces new experimental techniques for probing atom-photon bound states and provides direct evidence of collective phenomena in driven-dissipative quantum metamaterials.
Quantum metrology, a cornerstone of quantum technologies, exploits entanglement and superposition to achieve higher precision than classical protocols in parameter-estimation tasks. When combined with critical phenomena such as phase transitions, the divergence of quantum fluctuations is predicted to enhance the performance of quantum sensors. Here, we implement a critical quantum sensor using a superconducting parametric (i.e., two-photon driven) Kerr resonator. The sensor, a linear resonator terminated by a superconducting quantum interference device, operates near the critical point of a finite-component second-order dissipative phase transition obtained by scaling the system parameters. We analyze the performance of a frequency-estimation protocol and show that quadratic precision scaling with respect to the system size can be achieved with finite values of the Kerr nonlinearity. Since each photon emitted from the cavity carries more information about the parameter to be estimated compared to its classical counterpart, our protocol opens up perspectives for faster or more precise metrological protocols. Our results demonstrate that quantum advantage in a sensing protocol can be achieved by exploiting a phase transition.
In open quantum systems, dissipative phase transitions (DPTs) emerge from the interplay between unitary evolution, drive, and dissipation. While second-order DPTs have been predominantly investigated theoretically, first-order DPTs have been observed in single-photon-driven Kerr resonators. We present here an experimental and theoretical analysis of both first and second-order DPTs in a two-photon-driven superconducting Kerr resonator. We characterize the steady state at the critical points, showing squeezing below vacuum and the coexistence of phases with different photon numbers. Through time resolved measurements, we study the dynamics across the critical points and observe hysteresis cycles at the first-order DPT and spontaneous symmetry breaking at the second-order DPT. Extracting the timescales of the critical phenomena reveals slowing down across five orders of magnitude when scaling towards the thermodynamic limit. Our results showcase the engineering of criticality in superconducting circuits, advancing the use of parametric resonators for critically-enhanced quantum information applications.
Quantum computing is a relatively new computing paradigm that leverages entanglement to implement algorithms beyond the reach of classical hardware. Superconducting quantum circuits have emerged as a platform to build quantum processors, with demonstrations of quantum supremacy over classical supercomputers and quantum error correction beyond fault tolerance. However, current noisy devices require significant improvements to unlock the full potential of quantum algorithms.This thesis investigates intrinsic noise channels in superconducting circuits and the design of noise-resilient qubits. By characterizing high-quality superconducting resonators, we identify lossy dielectric materials at the interfaces as the dominant loss mechanism, which we mitigate via targeted surface treatments. Subsequently, we leverage Josephson junction nonlinearity to engineer noise-biased qubits utilizing the Kerr parametric oscillator (KPO). By analyzing the efficiency of strong, far-off-resonance driving to facilitate three- and four-wave mixing processes, we demonstrate high-fidelity operations on Fock, Kerr-cat, and dual-rail qubits. For the Kerr-cat qubit, we introduce a novel 2D architecture that enables strong light-matter coupling with suppressed Purcell decay, yielding millisecond-scale bit-flip lifetimes. Within this same architecture, we demonstrate a longitudinal qubit readout with a 99.6%99.6\%99.6% quantum nondemolition score, alongside a high-fidelity universal single-qubit gate set, all while maintaining bit-flip error suppression. Finally, we exploit the efficient wave-mixing of strongly coupled, far-detuned KPOs to realize a dynamically protected dual-rail qubit exhibiting both erasure bias and high-fidelity single-qubit gates.