Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1711.00346 · Physical Review A

Efficient quantum microwave-to-optical conversion using electro-optic nanophotonic coupled resonators

Mohammad Soltani, Mian Zhang, Colm A. Ryan, Guilhem J. Ribeill, Cheng Wang, Marko Lončar

Published Oct 5, 2017• 79 citations
arXivHTMLPDF

Abstract

We propose a low-noise, triply resonant, electro-optic (EO) scheme for quantum microwave-to-optical conversion based on coupled nanophotonics resonators integrated with a superconducting qubit. Our optical system features a split resonance---a doublet---with a tunable frequency splitting that matches the microwave resonance frequency of the superconducting qubit. This is in contrast to conventional approaches, where large optical resonators with free-spectral range comparable to the qubit microwave frequency are used. In our system, EO mixing between the optical pump coupled into the low-frequency doublet mode and a resonance microwave photon results in an up-converted optical photon on resonance with high-frequency doublet mode. Importantly, the down-conversion process, which is the source of noise, is suppressed in our scheme as the coupled-resonator system does not support modes at that frequency. Our device has at least an order of magnitude smaller footprint than conventional devices, resulting in large overlap between optical and microwave fields and a large photon conversion rate ($g/2\ensuremath{\pi}$) in the range of $\ensuremath{\sim}5$--15 kHz. Owing to a large $g$ factor and doubly resonant nature of our device, microwave-to-optical frequency conversion can be achieved with optical pump powers in the range of tens of microwatts, even with moderate values for optical $\mathit{Q}$ ($\ensuremath{\sim}{10}^{6}$) and microwave $Q$ ($\ensuremath{\sim}{10}^{4}$). The performance metrics of our device, with substantial improvement over the previous EO-based approaches, promise a scalable quantum microwave-to-optical conversion and networking of superconducting processors via optical fiber communication.

DOI
10.1103/physreva.96.043808

Related papers

On-chip microwave-to-optical quantum coherent converter based on a superconducting resonator coupled to an electro-optic microresonator

Clément Javerzac‐Galy, Kirill Plekhanov, Nathan Bernier +3 more

We propose a device architecture capable of direct quantum coherent electro-optical conversion of microwave-to-optical photons. The hybrid system consists of a planar superconducting microwave circuit coupled to an integrated whispering-gallery-mode microresonator made from an electro-optical material. We show that by exploiting the large vacuum electric field of the planar microwave resonator, electro-optical (vacuum) coupling strengths ${g}_{0}$ as large as $\ensuremath{\sim}2\ensuremath{\pi}O(10\ensuremath{-}100)$ kHz are achievable with currently available technology---a more than 3 orders of magnitude improvement over prior designs and realizations. Operating at millikelvin temperatures, such a converter would enable high-efficiency conversion of microwave-to-optical photons. We analyze the added noise and show that maximum quantum coherent conversion efficiency is achieved for a multiphoton cooperativity of unity which can be reached with optical power as low as $O(1)$ mW.

arXiv:1512.06442•Physical Review A•Nov 9, 2016•103 citations

Electro-optic quantum transduction between superconducting microwave qubits and optical photons

Mo Soltani

Quantum frequency conversion between superconducting (SC) microwave qubits and telecom optical photons is critical for long distance communication of networked SC quantum processors. While SC qubits operate at cryogenic temperatures to sustain their quantum coherence, converting them to the optical domain enables transferring the quantum states to room temperature and over long distances. For such a quantum state transduction process, several schemes have been investigated, including optomechanics, magnons, piezomechanics, and Pockels electro-optics (EO). The EO conversion approach is particularly attractive since it is broadband, low noise, mechanically and thermally stable (i.e., does not rely on freestanding structures), scalable (largescale integration of EO devices with superconducting circuits is possible), and tunable (e.g., using bias voltages). In this presentation we review our progress in an electro-optic based quantum transduction and discuss the promises and challenges.

Photonics for Quantum (PfQ)•Aug 27, 2021•0 citations

Efficient microwave to optical photon conversion: an electro-optical realization

Alfredo Rueda, Florian Sedlmeir, Michele C. Collodo +9 more

Linking classical microwave electrical circuits to the optical telecommunication band is at the core of modern communication. Future quantum information networks will require coherent microwave-to-optical conversion to link electronic quantum processors and memories via low-loss optical telecommunication networks. Efficient conversion can be achieved with electro-optical modulators operating at the single microwave photon level. In the standard electro-optic modulation scheme this is impossible because both, up- and downconverted, sidebands are necessarily present. Here we demonstrate true single sideband up- or downconversion in a triply resonant whispering gallery mode resonator by explicitly addressing modes with asymmetric free spectral range. Compared to previous experiments, we show a three orders of magnitude improvement of the electro-optical conversion efficiency reaching 0.1% photon number conversion for a 10GHz microwave tone at 0.42mW of optical pump power. The presented scheme is fully compatible with existing superconducting 3D circuit quantum electrodynamics technology and can be used for non-classical state conversion and communication. Our conversion bandwidth is larger than 1MHz and not fundamentally limited.

arXiv:1601.07261•Optica•Jun 3, 2016•249 citations

Microwave-to-optical transduction with erbium ions coupled to planar photonic and superconducting resonators

Jake Rochman, Tian Xie, John G. Bartholomew +2 more

Abstract Optical quantum networks can connect distant quantum processors to enable secure quantum communication and distributed quantum computing. Superconducting qubits are a leading technology for quantum information processing but cannot couple to long-distance optical networks without an efficient, coherent, and low noise interface between microwave and optical photons. Here, we demonstrate a microwave-to-optical transducer using an ensemble of erbium ions that is simultaneously coupled to a superconducting microwave resonator and a nanophotonic optical resonator. The coherent atomic transitions of the ions mediate the frequency conversion from microwave photons to optical photons and using photon counting we observed device conversion efficiency approaching 10 −7 . With pulsed operation at a low duty cycle, the device maintained a spin temperature below 100 mK and microwave resonator heating of less than 0.15 quanta.

Nature Communications•Mar 1, 2023•48 citations

Microwave to optical quantum conversion

Wei Fu, Mingrui Xu, Yuntao Xu +4 more

Microwave and optical photons are two principle carriers for quantum information. Microwave photons can be effectively manipulated by superconducting circuits at milli-Kelvin environments; optical photons transmit information over long distances in optical fibers. Therefore, microwave-to-optical (MO) quantum converters, which interface superconducting qubits and optical photons, represent an indispensable component in future quantum networks. Here, we present our recent efforts on developing integrated gigahertz piezo-optomechanics and electro-optics (EO) MO converters. We demonstrate efficient bi-directional conversion in both schemes at cryogenic temperatures. Moreover, we realized MO conversion with the device in the quantum ground state, while achieving efficient conversion efficiency. Our results represent a substantial step towards faithful microwave to optical quantum conversions.

Quantum Computing, Communication, and Simulation•Mar 2, 2022•0 citations

All-dielectric resonant cavity electro-optic transduction between microwave and telecom

Mihir Khanna, Yang Hu, Thomas Purdy

Achieving efficient microwave–optical transduction is a critical challenge for quantum networks where information is shared optically across disparate microwave systems and for coherent optical detection and manipulation of microwave states. Resonant electro-optic systems are being pursued as a means of efficiently bridging these frequencies. Here, we present a platform that employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry–Pérot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon-number conversion efficiency at the percent level, comparable to that of state-of-the-art devices at room temperature—sufficient to resolve the thermal occupation of the microwave mode—by taking advantage of the high-power handling, low loss, and low noise of all-dielectric devices. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave–optical quantum transduction.

Optica•May 29, 2026•0 citations
We propose a low-noise, triply resonant, electro-optic (EO) scheme for quantum microwave-to-optical conversion based on coupled nanophotonics resonators integrated with a superconducting qubit. Our optical system features a split resonance---a doublet---with a tunable frequency splitting that matches the microwave resonance frequency of the superconducting qubit. This is in contrast to conventional approaches, where large optical resonators with free-spectral range comparable to the qubit microwave frequency are used. In our system, EO mixing between the optical pump coupled into the low-frequency doublet mode and a resonance microwave photon results in an up-converted optical photon on resonance with high-frequency doublet mode. Importantly, the down-conversion process, which is the source of noise, is suppressed in our scheme as the coupled-resonator system does not support modes at that frequency. Our device has at least an order of magnitude smaller footprint than conventional devices, resulting in large overlap between optical and microwave fields and a large photon conversion rate (g/2\ensuremathπg/2\ensuremath{\pi}g/2\ensuremathπ) in the range of \ensuremath∼5\ensuremath{\sim}5\ensuremath∼5--15 kHz. Owing to a large ggg factor and doubly resonant nature of our device, microwave-to-optical frequency conversion can be achieved with optical pump powers in the range of tens of microwatts, even with moderate values for optical Q\mathit{Q}Q (\ensuremath∼106\ensuremath{\sim}{10}^{6}\ensuremath∼106) and microwave QQQ (\ensuremath∼104\ensuremath{\sim}{10}^{4}\ensuremath∼104). The performance metrics of our device, with substantial improvement over the previous EO-based approaches, promise a scalable quantum microwave-to-optical conversion and networking of superconducting processors via optical fiber communication.
We propose a device architecture capable of direct quantum coherent electro-optical conversion of microwave-to-optical photons. The hybrid system consists of a planar superconducting microwave circuit coupled to an integrated whispering-gallery-mode microresonator made from an electro-optical material. We show that by exploiting the large vacuum electric field of the planar microwave resonator, electro-optical (vacuum) coupling strengths g0{g}_{0}g0​ as large as $\ensuremath{\sim}2\ensuremath{\pi}O(10\ensuremath{-}100)$ kHz are achievable with currently available technology---a more than 3 orders of magnitude improvement over prior designs and realizations. Operating at millikelvin temperatures, such a converter would enable high-efficiency conversion of microwave-to-optical photons. We analyze the added noise and show that maximum quantum coherent conversion efficiency is achieved for a multiphoton cooperativity of unity which can be reached with optical power as low as O(1)O(1)O(1) mW.
Quantum frequency conversion between superconducting (SC) microwave qubits and telecom optical photons is critical for long distance communication of networked SC quantum processors. While SC qubits operate at cryogenic temperatures to sustain their quantum coherence, converting them to the optical domain enables transferring the quantum states to room temperature and over long distances. For such a quantum state transduction process, several schemes have been investigated, including optomechanics, magnons, piezomechanics, and Pockels electro-optics (EO). The EO conversion approach is particularly attractive since it is broadband, low noise, mechanically and thermally stable (i.e., does not rely on freestanding structures), scalable (largescale integration of EO devices with superconducting circuits is possible), and tunable (e.g., using bias voltages). In this presentation we review our progress in an electro-optic based quantum transduction and discuss the promises and challenges.
Linking classical microwave electrical circuits to the optical telecommunication band is at the core of modern communication. Future quantum information networks will require coherent microwave-to-optical conversion to link electronic quantum processors and memories via low-loss optical telecommunication networks. Efficient conversion can be achieved with electro-optical modulators operating at the single microwave photon level. In the standard electro-optic modulation scheme this is impossible because both, up- and downconverted, sidebands are necessarily present. Here we demonstrate true single sideband up- or downconversion in a triply resonant whispering gallery mode resonator by explicitly addressing modes with asymmetric free spectral range. Compared to previous experiments, we show a three orders of magnitude improvement of the electro-optical conversion efficiency reaching 0.1% photon number conversion for a 10GHz microwave tone at 0.42mW of optical pump power. The presented scheme is fully compatible with existing superconducting 3D circuit quantum electrodynamics technology and can be used for non-classical state conversion and communication. Our conversion bandwidth is larger than 1MHz and not fundamentally limited.
Abstract Optical quantum networks can connect distant quantum processors to enable secure quantum communication and distributed quantum computing. Superconducting qubits are a leading technology for quantum information processing but cannot couple to long-distance optical networks without an efficient, coherent, and low noise interface between microwave and optical photons. Here, we demonstrate a microwave-to-optical transducer using an ensemble of erbium ions that is simultaneously coupled to a superconducting microwave resonator and a nanophotonic optical resonator. The coherent atomic transitions of the ions mediate the frequency conversion from microwave photons to optical photons and using photon counting we observed device conversion efficiency approaching 10 −7 . With pulsed operation at a low duty cycle, the device maintained a spin temperature below 100 mK and microwave resonator heating of less than 0.15 quanta.
Microwave and optical photons are two principle carriers for quantum information. Microwave photons can be effectively manipulated by superconducting circuits at milli-Kelvin environments; optical photons transmit information over long distances in optical fibers. Therefore, microwave-to-optical (MO) quantum converters, which interface superconducting qubits and optical photons, represent an indispensable component in future quantum networks. Here, we present our recent efforts on developing integrated gigahertz piezo-optomechanics and electro-optics (EO) MO converters. We demonstrate efficient bi-directional conversion in both schemes at cryogenic temperatures. Moreover, we realized MO conversion with the device in the quantum ground state, while achieving efficient conversion efficiency. Our results represent a substantial step towards faithful microwave to optical quantum conversions.
Achieving efficient microwave–optical transduction is a critical challenge for quantum networks where information is shared optically across disparate microwave systems and for coherent optical detection and manipulation of microwave states. Resonant electro-optic systems are being pursued as a means of efficiently bridging these frequencies. Here, we present a platform that employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry–Pérot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon-number conversion efficiency at the percent level, comparable to that of state-of-the-art devices at room temperature—sufficient to resolve the thermal occupation of the microwave mode—by taking advantage of the high-power handling, low loss, and low noise of all-dielectric devices. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave–optical quantum transduction.