Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1512.06442 · Physical Review A

On-chip microwave-to-optical quantum coherent converter based on a superconducting resonator coupled to an electro-optic microresonator

Clément Javerzac‐Galy, Kirill Plekhanov, Nathan Bernier, L. D. Tóth, Alexey K. Feofanov, Tobias Jan Kippenberg

Published Nov 9, 2016• 103 citations
arXivHTMLPDF

Abstract

We propose a device architecture capable of direct quantum coherent electro-optical conversion of microwave-to-optical photons. The hybrid system consists of a planar superconducting microwave circuit coupled to an integrated whispering-gallery-mode microresonator made from an electro-optical material. We show that by exploiting the large vacuum electric field of the planar microwave resonator, electro-optical (vacuum) coupling strengths ${g}_{0}$ as large as $\ensuremath{\sim}2\ensuremath{\pi}O(10\ensuremath{-}100)$ kHz are achievable with currently available technology---a more than 3 orders of magnitude improvement over prior designs and realizations. Operating at millikelvin temperatures, such a converter would enable high-efficiency conversion of microwave-to-optical photons. We analyze the added noise and show that maximum quantum coherent conversion efficiency is achieved for a multiphoton cooperativity of unity which can be reached with optical power as low as $O(1)$ mW.

DOI
10.1103/physreva.94.053815

Related papers

Efficient quantum microwave-to-optical conversion using electro-optic nanophotonic coupled resonators

Mohammad Soltani, Mian Zhang, Colm A. Ryan +3 more

We propose a low-noise, triply resonant, electro-optic (EO) scheme for quantum microwave-to-optical conversion based on coupled nanophotonics resonators integrated with a superconducting qubit. Our optical system features a split resonance---a doublet---with a tunable frequency splitting that matches the microwave resonance frequency of the superconducting qubit. This is in contrast to conventional approaches, where large optical resonators with free-spectral range comparable to the qubit microwave frequency are used. In our system, EO mixing between the optical pump coupled into the low-frequency doublet mode and a resonance microwave photon results in an up-converted optical photon on resonance with high-frequency doublet mode. Importantly, the down-conversion process, which is the source of noise, is suppressed in our scheme as the coupled-resonator system does not support modes at that frequency. Our device has at least an order of magnitude smaller footprint than conventional devices, resulting in large overlap between optical and microwave fields and a large photon conversion rate ($g/2\ensuremath{\pi}$) in the range of $\ensuremath{\sim}5$--15 kHz. Owing to a large $g$ factor and doubly resonant nature of our device, microwave-to-optical frequency conversion can be achieved with optical pump powers in the range of tens of microwatts, even with moderate values for optical $\mathit{Q}$ ($\ensuremath{\sim}{10}^{6}$) and microwave $Q$ ($\ensuremath{\sim}{10}^{4}$). The performance metrics of our device, with substantial improvement over the previous EO-based approaches, promise a scalable quantum microwave-to-optical conversion and networking of superconducting processors via optical fiber communication.

arXiv:1711.00346•Physical Review A•Oct 5, 2017•79 citations

Efficient microwave to optical photon conversion: an electro-optical realization

Alfredo Rueda, Florian Sedlmeir, Michele C. Collodo +9 more

Linking classical microwave electrical circuits to the optical telecommunication band is at the core of modern communication. Future quantum information networks will require coherent microwave-to-optical conversion to link electronic quantum processors and memories via low-loss optical telecommunication networks. Efficient conversion can be achieved with electro-optical modulators operating at the single microwave photon level. In the standard electro-optic modulation scheme this is impossible because both, up- and downconverted, sidebands are necessarily present. Here we demonstrate true single sideband up- or downconversion in a triply resonant whispering gallery mode resonator by explicitly addressing modes with asymmetric free spectral range. Compared to previous experiments, we show a three orders of magnitude improvement of the electro-optical conversion efficiency reaching 0.1% photon number conversion for a 10GHz microwave tone at 0.42mW of optical pump power. The presented scheme is fully compatible with existing superconducting 3D circuit quantum electrodynamics technology and can be used for non-classical state conversion and communication. Our conversion bandwidth is larger than 1MHz and not fundamentally limited.

arXiv:1601.07261•Optica•Jun 3, 2016•249 citations

Fiber-integrated microwave-to-optical quantum transducer

Wenfang Li, Jinjin Du, Christopher M. Wilson +1 more

We propose an on-chip fiber-based quantum transducer to convert microwave photons into optical-telecommunication-band photons. The device consists of a coplanar-waveguide microwave resonator and a pair of coupled optical cavities integrated into a rare-earth-doped fiber. The microwave resonator is formed by two aluminum strips deposited onto the cladding of the fiber, whose diameter has been etched down to approximately $8\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{m}$. We study the conversion process using the cavity electro-optic formalism for a system operating at liquid-helium temperature (around 4 K), as well as using a three-wave mixing approach for operation at millikelvin temperatures achievable in a dilution refrigerator. Both methods predict that unity conversion efficiency could be achievable with realistically achievable experimental parameters. The proposed device acts as a quantum transducer for coherent microwave-to-optical conversion, which has great promise for application in all-fiber integrated quantum devices for quantum information processing.

Physical Review Applied•Oct 11, 2023•3 citations

Photon conversion integrated

Christiana Varnava

Efficient conversion between microwave and optical photons is important for the development of hybrid quantum platforms in which quantum information is processed by superconducting circuits and transmitted with optical photons. A promising approach is to use electro-optic modulation with a microwave cavity coupled to an optical cavity, where microwave photons are up-converted to optical photons through sum frequency generation, and optical photons are converted to microwave photons through difference frequency generation. However, the frequency matching conditions in such set-ups usually require the size of the device to be large enough so that the optical frequencies of the pump and signal photons are supported. Hong Tang and colleagues have now fabricated a hybrid superconducting–photonic device that overcomes this limitation by using an integrated planar geometry to coherently convert between microwave and optical photons. adapted under a Creative Commons license CC BY-NC 4.0 ; AAAS

Nature Electronics•Sep 7, 2018•0 citations

Superconducting cavity electro-optics: A platform for coherent photon conversion between superconducting and photonic circuits

Linran Fan, Chang‐Ling Zou, Risheng Cheng +5 more

Leveraging the quantum information-processing ability of superconducting circuits and long-distance distribution ability of optical photons promises the realization of complex and large-scale quantum networks. In such a scheme, a coherent and efficient quantum transducer between superconducting and photonic circuits is critical. However, this quantum transducer is still challenging because the use of intermediate excitations in current schemes introduces extra noise and limits bandwidth. We realize direct and coherent transduction between superconducting and photonic circuits based on the triple-resonance electro-optic principle, with integrated devices incorporating both superconducting and optical cavities on the same chip. Electromagnetically induced transparency is observed, indicating the coherent interaction between microwave and optical photons. Internal conversion efficiency of 25.9 ± 0.3% has been achieved, with 2.05 ± 0.04% total efficiency. Superconducting cavity electro-optics offers broad transduction bandwidth and high scalability and represents a significant step toward integrated hybrid quantum circuits and distributed quantum computation.

arXiv:1805.04509•Science Advances•Aug 3, 2018•228 citations

A silicon‐organic hybrid platform for quantum microwave-to-optical transduction

Jeremy D. Witmer, Timothy P. McKenna, Patricio Arrangoiz-Arriola +6 more

Abstract Low-loss fiber optic links have the potential to connect superconducting quantum processors together over long distances to form large scale quantum networks. A key component of these future networks is a quantum transducer that coherently and bidirectionally converts photons from microwave frequencies to optical frequencies. We present a platform for electro-optic photon conversion based on silicon‐organic hybrid photonics. Our device combines high quality factor microwave and optical resonators with an electro-optic polymer cladding to perform microwave-to-optical photon conversion from 6.7 GHz to 193 THz (1558 nm). The device achieves an electro-optic coupling rate of 590 Hz in a millikelvin dilution refrigerator environment. We use an optical heterodyne measurement technique to demonstrate the single-sideband nature of the conversion with a selectivity of approximately 10 dB. We analyze the effects of stray light in our device and suggest ways in which this can be mitigated. Finally, we present initial results on high-impedance spiral resonators designed to increase the electro-optic coupling.

arXiv:1912.10346•Quantum Science and Technology•Mar 11, 2020•41 citations
We propose a device architecture capable of direct quantum coherent electro-optical conversion of microwave-to-optical photons. The hybrid system consists of a planar superconducting microwave circuit coupled to an integrated whispering-gallery-mode microresonator made from an electro-optical material. We show that by exploiting the large vacuum electric field of the planar microwave resonator, electro-optical (vacuum) coupling strengths g0{g}_{0}g0​ as large as \ensuremath∼2\ensuremathπO(10\ensuremath−100)\ensuremath{\sim}2\ensuremath{\pi}O(10\ensuremath{-}100)\ensuremath∼2\ensuremathπO(10\ensuremath−100) kHz are achievable with currently available technology---a more than 3 orders of magnitude improvement over prior designs and realizations. Operating at millikelvin temperatures, such a converter would enable high-efficiency conversion of microwave-to-optical photons. We analyze the added noise and show that maximum quantum coherent conversion efficiency is achieved for a multiphoton cooperativity of unity which can be reached with optical power as low as O(1)O(1)O(1) mW.
We propose a low-noise, triply resonant, electro-optic (EO) scheme for quantum microwave-to-optical conversion based on coupled nanophotonics resonators integrated with a superconducting qubit. Our optical system features a split resonance---a doublet---with a tunable frequency splitting that matches the microwave resonance frequency of the superconducting qubit. This is in contrast to conventional approaches, where large optical resonators with free-spectral range comparable to the qubit microwave frequency are used. In our system, EO mixing between the optical pump coupled into the low-frequency doublet mode and a resonance microwave photon results in an up-converted optical photon on resonance with high-frequency doublet mode. Importantly, the down-conversion process, which is the source of noise, is suppressed in our scheme as the coupled-resonator system does not support modes at that frequency. Our device has at least an order of magnitude smaller footprint than conventional devices, resulting in large overlap between optical and microwave fields and a large photon conversion rate ($g/2\ensuremath{\pi}$) in the range of $\ensuremath{\sim}5$--15 kHz. Owing to a large ggg factor and doubly resonant nature of our device, microwave-to-optical frequency conversion can be achieved with optical pump powers in the range of tens of microwatts, even with moderate values for optical Q\mathit{Q}Q ($\ensuremath{\sim}{10}^{6}$) and microwave QQQ ($\ensuremath{\sim}{10}^{4}$). The performance metrics of our device, with substantial improvement over the previous EO-based approaches, promise a scalable quantum microwave-to-optical conversion and networking of superconducting processors via optical fiber communication.
Linking classical microwave electrical circuits to the optical telecommunication band is at the core of modern communication. Future quantum information networks will require coherent microwave-to-optical conversion to link electronic quantum processors and memories via low-loss optical telecommunication networks. Efficient conversion can be achieved with electro-optical modulators operating at the single microwave photon level. In the standard electro-optic modulation scheme this is impossible because both, up- and downconverted, sidebands are necessarily present. Here we demonstrate true single sideband up- or downconversion in a triply resonant whispering gallery mode resonator by explicitly addressing modes with asymmetric free spectral range. Compared to previous experiments, we show a three orders of magnitude improvement of the electro-optical conversion efficiency reaching 0.1% photon number conversion for a 10GHz microwave tone at 0.42mW of optical pump power. The presented scheme is fully compatible with existing superconducting 3D circuit quantum electrodynamics technology and can be used for non-classical state conversion and communication. Our conversion bandwidth is larger than 1MHz and not fundamentally limited.
We propose an on-chip fiber-based quantum transducer to convert microwave photons into optical-telecommunication-band photons. The device consists of a coplanar-waveguide microwave resonator and a pair of coupled optical cavities integrated into a rare-earth-doped fiber. The microwave resonator is formed by two aluminum strips deposited onto the cladding of the fiber, whose diameter has been etched down to approximately $8\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{m}$. We study the conversion process using the cavity electro-optic formalism for a system operating at liquid-helium temperature (around 4 K), as well as using a three-wave mixing approach for operation at millikelvin temperatures achievable in a dilution refrigerator. Both methods predict that unity conversion efficiency could be achievable with realistically achievable experimental parameters. The proposed device acts as a quantum transducer for coherent microwave-to-optical conversion, which has great promise for application in all-fiber integrated quantum devices for quantum information processing.
Efficient conversion between microwave and optical photons is important for the development of hybrid quantum platforms in which quantum information is processed by superconducting circuits and transmitted with optical photons. A promising approach is to use electro-optic modulation with a microwave cavity coupled to an optical cavity, where microwave photons are up-converted to optical photons through sum frequency generation, and optical photons are converted to microwave photons through difference frequency generation. However, the frequency matching conditions in such set-ups usually require the size of the device to be large enough so that the optical frequencies of the pump and signal photons are supported. Hong Tang and colleagues have now fabricated a hybrid superconducting–photonic device that overcomes this limitation by using an integrated planar geometry to coherently convert between microwave and optical photons. adapted under a Creative Commons license CC BY-NC 4.0 ; AAAS
Leveraging the quantum information-processing ability of superconducting circuits and long-distance distribution ability of optical photons promises the realization of complex and large-scale quantum networks. In such a scheme, a coherent and efficient quantum transducer between superconducting and photonic circuits is critical. However, this quantum transducer is still challenging because the use of intermediate excitations in current schemes introduces extra noise and limits bandwidth. We realize direct and coherent transduction between superconducting and photonic circuits based on the triple-resonance electro-optic principle, with integrated devices incorporating both superconducting and optical cavities on the same chip. Electromagnetically induced transparency is observed, indicating the coherent interaction between microwave and optical photons. Internal conversion efficiency of 25.9 ± 0.3% has been achieved, with 2.05 ± 0.04% total efficiency. Superconducting cavity electro-optics offers broad transduction bandwidth and high scalability and represents a significant step toward integrated hybrid quantum circuits and distributed quantum computation.
Abstract Low-loss fiber optic links have the potential to connect superconducting quantum processors together over long distances to form large scale quantum networks. A key component of these future networks is a quantum transducer that coherently and bidirectionally converts photons from microwave frequencies to optical frequencies. We present a platform for electro-optic photon conversion based on silicon‐organic hybrid photonics. Our device combines high quality factor microwave and optical resonators with an electro-optic polymer cladding to perform microwave-to-optical photon conversion from 6.7 GHz to 193 THz (1558 nm). The device achieves an electro-optic coupling rate of 590 Hz in a millikelvin dilution refrigerator environment. We use an optical heterodyne measurement technique to demonstrate the single-sideband nature of the conversion with a selectivity of approximately 10 dB. We analyze the effects of stray light in our device and suggest ways in which this can be mitigated. Finally, we present initial results on high-impedance spiral resonators designed to increase the electro-optic coupling.