Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1710.08627 · Applied Optics

Spectroscopic study of a diffusion-bonded sapphire cell for hot metal vapors

Naota Sekiguchi, Takumi Sato, Kiyoshi Ishikawa, Atsushi Hatakeyama

Published Dec 18, 2017• 10 citations
arXivHTMLPDF

Abstract

Characteristics of a diffusion-bonded sapphire cell for optical experiments with hot metal vapors were investigated. The sapphire cell consisted of sapphire-crystal plates and a borosilicate-glass tube, which were bonded to each other by diffusion bonding without any binders or glues. The glass tube was attached to a vacuum manifold using the standard method applied in glass processing, filled with a small amount of Rb metal by chasing with a torch, and then sealed. The cell was baked at high temperatures, and optical experiments were then performed using rubidium atoms at room temperature. The sapphire cell was found to be vacuum tight, at least up to 350°C, and the sapphire walls remained clear over all temperatures. From the optical experiments, the generation of a background gas was indicated after baking at 200°C. The background gas pressure was low enough to avoid pressure broadening of absorption lines but high enough to cause velocity-changing collisions of Rb atoms. The generated gas pressure decreased at higher temperatures, probably due to chemical reactions.

DOI
10.1364/ao.57.000052

Related papers

Robust high-temperature sapphire cell for metal vapors

Jonathan Andrew Neuman, P. Wang, Alan C. Gallagher

We describe a simple vacuum cell that successfully contains high-temperature and high-density alkali-metal and alkaline-earth vapors. The transparent cell, made from sapphire parts joined by melted glass powders, operates without a buffer gas. Temperatures over 700 °C and metal-vapor densities greater than 1017 cm−3 have been achieved. Such an optical cell is useful for many atomic physics experiments where collisions with buffer gas atoms are problematic or where a spatially uniform distribution of high-density, corrosive atoms is desired.

Review of Scientific Instruments•Apr 1, 1995•31 citations

Triple stack glass-to-glass anodic bonding for optogalvanic spectroscopy cells with electrical feedthroughs

Renate Daschner, Harald Kübler, R. Löw +3 more

We demonstrate the use of an anodic bonding technique for building a vacuum tight vapor cell for the use of Rydberg spectroscopy of alkali atoms with thin film electrodes on the inside of the cell. The cell is fabricated by simultaneous triple stack glass-to-glass anodic bonding at 300 °C. This glue-free, low temperature sealing technique provides the opportunity to include thin film electric feedthroughs. The pressure broadening is only limited by the vapor pressure of rubidium and the lifetime is at least four months with operating temperatures up to 230 °C.

arXiv:1403.1093•Applied Physics Letters•Jul 28, 2014•34 citations

Saturated absorption and electromagnetically induced transparency of residual rubidium in dense cesium vapor

Armen D. Sargsyan, Anahit L. Gogyan, David G. Sarkisyan

In the sealed-off cesium vapor cell studied in this work, a residual rubidium fraction of approximately $\sim$1\% was observed. We investigate the optical response of these trace Rb atoms in a sealed 1~cm long Cs-filled vapor cell. Despite the low concentration, laser excitation at 795~nm allows the observation of saturated absorption and electromagnetically induced transparency (EIT) resonances. The surrounding Cs vapor effectively acts as a buffer medium, reducing the Rb atomic velocity and increasing the interaction time with the laser field, which improves the EIT signal. The experiments are performed in an all-sapphire cell that can be heated up to 500$^{\circ}$C without window blackening, unlike conventional glass cells. From the measured spectra, Cs--Rb collisional cross sections are estimated. These results show that residual atomic species in high-temperature vapor cells can be exploited for spectroscopic and nonlinear-optical studies.

arXiv:2603.09284•Mar 10, 2026•0 citations

Sealing techniques for on-chip atomic vapor cells

John F. Hulbert, Brandon T. Carroll, Aaron R. Hawkins +2 more

We have recently reported atomic spectroscopy using on-chip rubidium vapor cells based on hollow core waveguides. To make the cells more robust and capable of multiple temperature cycles, we examined several techniques for Rb introduction and sealing. To date the most successful sealing technique has been pinching off the end of a short length of copper tubing. This technique not only hermetically seals the cells, but also allows them to be evacuated to a desired pressure. We have been able to evacuate glass prototype Rb vapor cells to a pressure as low as 80 mTorr and as high as 2 Torr and successfully observe the Rb optical absorption spectrum. Along with our testing of sealing techniques we have been observing the effects of different epoxies and inert gas atmospheres on the robustness of vapor cells. With optimal parameters we have successfully observed the Rb optical absorption spectrum through multiple temperature cycles. These new Rb introduction and sealing methods will be applied to on-chip cells containing integrated hollow waveguides which can be used for a number of different optical applications, such as electromagnetically induced transparency, single-photon nonlinearities, and slow light.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jan 10, 2008•1 citation

Absorption Spectroscopy of Rubidium in an Alkali Metal Dispenser Cell and Bleached Wave Analysis

James M Rosenthal

Abstract : An absorption spectrum of a rubidium alkali metal dispenser (AMD) cell was obtained in order to determine the system s suitability for use in a diode pumped alkali laser (DPAL) and use in high-temperature spectroscopic studies. The AMD produced a concentration of 3.65 0.16 1010 cm-3, which is in the ideal range for Beer s Law region absorption spectroscopy, but too low to make a high-power DPAL in a 10 cm cell with a poor Q resonator. Before AMDs can be used to determine pressure broadening and shifting coefficients, issues concerning contamination and producing rubidium vapor at pressure must be resolved. A separate portion of this study focused on a sealed rubidium Pyrex cell with neon buffer gas. A continuous wave titanium sapphire beam was focused into the cell with various lenses to maximize pump intensity through the cell. Images were taken of the side fluorescence of the cell to determine the bleached regions. The total horizontal propagation of the bleached region for each image was proportional to the pump laser power and the inverse of the rubidium vapor density. Disparity between the bleached volume estimated from the beam parameters and the theoretical bleached volume suggested the beam intensity had a strong radial dependence. When the pump wavelength was changed, visible side fluorescence occurred in regions where the laser intensity was at least 0.125 times the saturation intensity and therefore not in the regions where the decay was determined by Beer s Law.

•Mar 26, 2015•1 citation

Spectroscopy of high-pressure rubidium–noble-gas mixtures

Till Ockenfels, Paško Roje, Thilo vom Hövel +2 more

Spectroscopy of alkali-metal--buffer-gas mixtures at high pressures from single-digit to several hundred bars in the regime of substantial collisional broadening is relevant in a wide range of fields, ranging from collisional redistribution cooling to laboratory astrophysics. Here we report on spectroscopic measurements of dense rubidium--noble-gas mixtures recorded in a pressure cell equipped with soldered sapphire optical viewports, which allows for the controlled realization of extreme conditions of high temperature and high pressure in a table top laboratory experiment. In the gas cell, we have recorded absorption and emission spectra of rubidium subject to 188 bars of helium buffer-gas pressure at 548-K temperature. The spectra to good accuracy follow a Boltzmann-type Kennard-Stepanov frequency scaling of the ratio of absorption and emission spectral profiles. Further, the long optical path length in the cell allowed us to both record spectra of rubidium-argon mixtures at moderate temperatures and high pressures and observe redistributional laser cooling in this system.

arXiv:2203.13580•Physical Review A•Jul 19, 2022•7 citations
Characteristics of a diffusion-bonded sapphire cell for optical experiments with hot metal vapors were investigated. The sapphire cell consisted of sapphire-crystal plates and a borosilicate-glass tube, which were bonded to each other by diffusion bonding without any binders or glues. The glass tube was attached to a vacuum manifold using the standard method applied in glass processing, filled with a small amount of Rb metal by chasing with a torch, and then sealed. The cell was baked at high temperatures, and optical experiments were then performed using rubidium atoms at room temperature. The sapphire cell was found to be vacuum tight, at least up to 350°C, and the sapphire walls remained clear over all temperatures. From the optical experiments, the generation of a background gas was indicated after baking at 200°C. The background gas pressure was low enough to avoid pressure broadening of absorption lines but high enough to cause velocity-changing collisions of Rb atoms. The generated gas pressure decreased at higher temperatures, probably due to chemical reactions.
We describe a simple vacuum cell that successfully contains high-temperature and high-density alkali-metal and alkaline-earth vapors. The transparent cell, made from sapphire parts joined by melted glass powders, operates without a buffer gas. Temperatures over 700 °C and metal-vapor densities greater than 1017 cm−3 have been achieved. Such an optical cell is useful for many atomic physics experiments where collisions with buffer gas atoms are problematic or where a spatially uniform distribution of high-density, corrosive atoms is desired.
We demonstrate the use of an anodic bonding technique for building a vacuum tight vapor cell for the use of Rydberg spectroscopy of alkali atoms with thin film electrodes on the inside of the cell. The cell is fabricated by simultaneous triple stack glass-to-glass anodic bonding at 300 °C. This glue-free, low temperature sealing technique provides the opportunity to include thin film electric feedthroughs. The pressure broadening is only limited by the vapor pressure of rubidium and the lifetime is at least four months with operating temperatures up to 230 °C.
In the sealed-off cesium vapor cell studied in this work, a residual rubidium fraction of approximately $\sim1%wasobserved.WeinvestigatetheopticalresponseofthesetraceRbatomsinasealed1 cmlongCs−filledvaporcell.Despitethelowconcentration,laserexcitationat795 nmallowstheobservationofsaturatedabsorptionandelectromagneticallyinducedtransparency(EIT)resonances.ThesurroundingCsvaporeffectivelyactsasabuffermedium,reducingtheRbatomicvelocityandincreasingtheinteractiontimewiththelaserfield,whichimprovestheEITsignal.Theexperimentsareperformedinanall−sapphirecellthatcanbeheatedupto5001\% was observed. We investigate the optical response of these trace Rb atoms in a sealed 1~cm long Cs-filled vapor cell. Despite the low concentration, laser excitation at 795~nm allows the observation of saturated absorption and electromagnetically induced transparency (EIT) resonances. The surrounding Cs vapor effectively acts as a buffer medium, reducing the Rb atomic velocity and increasing the interaction time with the laser field, which improves the EIT signal. The experiments are performed in an all-sapphire cell that can be heated up to 5001%wasobserved.WeinvestigatetheopticalresponseofthesetraceRbatomsinasealed1 cmlongCs−filledvaporcell.Despitethelowconcentration,laserexcitationat795 nmallowstheobservationofsaturatedabsorptionandelectromagneticallyinducedtransparency(EIT)resonances.ThesurroundingCsvaporeffectivelyactsasabuffermedium,reducingtheRbatomicvelocityandincreasingtheinteractiontimewiththelaserfield,whichimprovestheEITsignal.Theexperimentsareperformedinanall−sapphirecellthatcanbeheatedupto500^{\circ}$C without window blackening, unlike conventional glass cells. From the measured spectra, Cs--Rb collisional cross sections are estimated. These results show that residual atomic species in high-temperature vapor cells can be exploited for spectroscopic and nonlinear-optical studies.
We have recently reported atomic spectroscopy using on-chip rubidium vapor cells based on hollow core waveguides. To make the cells more robust and capable of multiple temperature cycles, we examined several techniques for Rb introduction and sealing. To date the most successful sealing technique has been pinching off the end of a short length of copper tubing. This technique not only hermetically seals the cells, but also allows them to be evacuated to a desired pressure. We have been able to evacuate glass prototype Rb vapor cells to a pressure as low as 80 mTorr and as high as 2 Torr and successfully observe the Rb optical absorption spectrum. Along with our testing of sealing techniques we have been observing the effects of different epoxies and inert gas atmospheres on the robustness of vapor cells. With optimal parameters we have successfully observed the Rb optical absorption spectrum through multiple temperature cycles. These new Rb introduction and sealing methods will be applied to on-chip cells containing integrated hollow waveguides which can be used for a number of different optical applications, such as electromagnetically induced transparency, single-photon nonlinearities, and slow light.
Abstract : An absorption spectrum of a rubidium alkali metal dispenser (AMD) cell was obtained in order to determine the system s suitability for use in a diode pumped alkali laser (DPAL) and use in high-temperature spectroscopic studies. The AMD produced a concentration of 3.65 0.16 1010 cm-3, which is in the ideal range for Beer s Law region absorption spectroscopy, but too low to make a high-power DPAL in a 10 cm cell with a poor Q resonator. Before AMDs can be used to determine pressure broadening and shifting coefficients, issues concerning contamination and producing rubidium vapor at pressure must be resolved. A separate portion of this study focused on a sealed rubidium Pyrex cell with neon buffer gas. A continuous wave titanium sapphire beam was focused into the cell with various lenses to maximize pump intensity through the cell. Images were taken of the side fluorescence of the cell to determine the bleached regions. The total horizontal propagation of the bleached region for each image was proportional to the pump laser power and the inverse of the rubidium vapor density. Disparity between the bleached volume estimated from the beam parameters and the theoretical bleached volume suggested the beam intensity had a strong radial dependence. When the pump wavelength was changed, visible side fluorescence occurred in regions where the laser intensity was at least 0.125 times the saturation intensity and therefore not in the regions where the decay was determined by Beer s Law.
Spectroscopy of alkali-metal--buffer-gas mixtures at high pressures from single-digit to several hundred bars in the regime of substantial collisional broadening is relevant in a wide range of fields, ranging from collisional redistribution cooling to laboratory astrophysics. Here we report on spectroscopic measurements of dense rubidium--noble-gas mixtures recorded in a pressure cell equipped with soldered sapphire optical viewports, which allows for the controlled realization of extreme conditions of high temperature and high pressure in a table top laboratory experiment. In the gas cell, we have recorded absorption and emission spectra of rubidium subject to 188 bars of helium buffer-gas pressure at 548-K temperature. The spectra to good accuracy follow a Boltzmann-type Kennard-Stepanov frequency scaling of the ratio of absorption and emission spectral profiles. Further, the long optical path length in the cell allowed us to both record spectra of rubidium-argon mixtures at moderate temperatures and high pressures and observe redistributional laser cooling in this system.