Controlling both the amplitude and the phase of the superconducting quantum order parameter ψ in nanostructures is important for next-generation information and communication technologies. The lack of electric resistance in superconductors, which may be advantageous for some technologies, hinders convenient voltage-bias tuning and hence limits the tunability of ψ at the microscopic scale. Here, we demonstrate the local tunability of the phase and amplitude of ψ, obtained by patterning with a single lithography step a Nb nano-superconducting quantum interference device (nano-SQUID) that is biased at its nanobridges. We accompany our experimental results by a semi-classical linearized model that is valid for generic nano-SQUIDs with multiple ports and helps simplify the modelling of non-linear couplings among the Josephson junctions. Our design helped us reveal unusual electric characteristics with effective zero inductance, which is promising for nanoscale magnetic sensing and quantum technologies.
Controlling both the amplitude and the phase of the superconducting quantum order parameter ψ in nanostructures is important for next-generation information and communication technologies. The lack of electric resistance in superconductors, which may be advantageous for some technologies, hinders convenient voltage-bias tuning and hence limits the tunability of ψ at the microscopic scale. Here, we demonstrate the local tunability of the phase and amplitude of ψ, obtained by patterning with a single lithography step a Nb nano-superconducting quantum interference device (nano-SQUID) that is biased at its nanobridges. We accompany our experimental results by a semi-classical linearized model that is valid for generic nano-SQUIDs with multiple ports and helps simplify the modelling of non-linear couplings among the Josephson junctions. Our design helped us reveal unusual electric characteristics with effective zero inductance, which is promising for nanoscale magnetic sensing and quantum technologies.
Abstract The tunability in Josephson junctions is foundational to the superconducting classical and quantum applications. Here, we demonstrate the local manipulation of supercurrent realized in a superconducting quantum interference device (SQUID) with two Nb/TiO x /Nb Josephson junctions that is biased at the TiO x layer. Our measurements indicate that the multi-port device allows for an easy and in situ tunability of the supercurrent. The control mechanism can be finely explained by simple yet valid theoretical methods, which take an effective electronic temperature across the SQUID and the self inductive magnetic flux into account. Furthermore, we show that the phase difference and kinetic inductance of this device can be tuned locally via the injection current. Thus, the device provides perspective for several superconducting electronics such as tunable superconducting circuits, sensitive magnetometry, and fast digital elements.
Nanoscale superconducting quantum interference devices (nano-SQUIDS) where the weak links are made from nanobridges, i.e., nanobridge SQUIDs (NBSs), are one of the most sensitive magnetometers for nanoscale magnetometry. Because of very strong nonlinearity in the nanobridge-electrode joints, the applied magnetic flux (${\mathrm{\ensuremath{\Phi}}}_{a}$)--critical current (Ic) characteristics of NBSs differ very significantly from conventional tunnel-junction SQUIDs, especially when the nanobridges are long and/or the screening parameter is large. However, in most of the theoretical descriptions, NBSs have been treated as the conventional tunnel-junction SQUIDs, which are based on the dc Josephson effect. Here, I present a model demonstrating that for long nanobridges and/or large screening parameters the ${I}_{c}({\mathrm{\ensuremath{\Phi}}}_{a})$ of a NBS can be explained by merely considering the fluxoid quantization in the NBS loop and the energy of the NBS; it is not necessary to take the Josephson effect into consideration. I also demonstrate that using the model, one can derive useful expressions such as the modulation depth and transfer function. I discuss the role of the kinetic inductance fraction ($\ensuremath{\kappa}$) in determining ${I}_{c}({\mathrm{\ensuremath{\Phi}}}_{a})$. I compare the predictions of the present model with the experimental data already published by several groups.
A superconducting quantum interference device (SQUID) miniaturized into the nanoscale is promising in the inductive detection of a single electron spin. A nano-SQUID with a strong spin coupling coefficient, a low flux noise, and a wide working magnetic field range is highly desired in a single spin resonance measurement. Nano-SQUIDs with Dayem bridge junctions excel in a high working field range and in the direct coupling from spins to the bridge. However, the common planar structure of nano-SQUIDs is known for problems such as a shallow flux modulation depth and a troublesome hysteresis in current–voltage curves. Here, we developed a fabrication process for creating three-dimensional (3-D) niobium (Nb) nano-SQUIDs with nanobridge junctions that can be tuned independently. Characterization of the device shows up to 45.9% modulation depth with a reversible current–voltage curve. Owning to the large modulation depth, the measured flux noise is as low as 0.34 μΦ 0 /Hz 1/2 . The working field range of the SQUID is greater than 0.5 T parallel to the SQUID plane. We believe that 3-D Nb nano-SQUIDs provide a promising step toward effective single-spin inductive detection.
It is customary to use arrays of superconducting quantum interference devices (SQUIDs) for implementing magnetic field-tunable inductors. Here, we demonstrate an equivalent tunability in a (SQUID-free) array of single Al/AlOx/Al Josephson tunnel junctions. With the proper choice of junction geometry, a perpendicularly applied magnetic field bends along the plane of the superconductor and focuses into the tunnel barrier region due to a demagnetization effect. Consequently, the Josephson inductance can be efficiently modulated by the Fraunhofer-type supercurrent interference. The elimination of SQUIDs not only simplifies the device design and fabrication but also facilitates a denser packing of junctions, and, hence, a higher inductance per unit length. As an example, we demonstrate a transmission line, the characteristic impedance of which is field-tuned in the range of 4–8 kΩ, centered around the important value of the resistance quantum h/(2e)2≈6.5 kΩ.
Abstract Superconducting quantum interference devices (SQUIDs) with 3D nano-bridge junctions can be miniaturized into nano-SQUIDs that are able to sense a few spins in a large magnetic field. Among all device parameters, the inductance is key to the performance of SQUIDs with 3D nano-bridge junctions. Here, we measured the critical-current magnetic flux modulation curves of 12 devices with three design types using a current strip-line directly coupled to the SQUID loop. A best flux modulation depth of 71% was achieved for our 3D Nb SQUID. From the modulation curves, we extracted the inductance values of the current stripe-line in each design and compared them with the corresponding simulation results of InductEX. In this way, London penetration depths of 110 and 420 nm were determined for our Nb (niobium) and NbN (niobium nitride) films, respectively. Furthermore, we showed that inductances of 11 and 119 pH for Nb and NbN 3D nano-bridge junctions, respectively, dominated the total inductance of our SQUID loops which are 23 pH for Nb and 255 pH for NbN. A screening parameter being equal to one suggests optimal critical currents of 89.6 and 8.1 μ A for Nb and NbN SQUIDs, respectively. Additionally, intrinsic flux noise of 110 ± 40 n Φ 0 /(Hz) 1/2 is calculated for the Nb SQUIDs with 3D nano-bridge junctions by Langevin simulation.
Superconducting quantum interference devices (SQUIDs) based on nanobridge junctions (NBJs) are promising platforms for highly sensitive magnetic detection. The SQUID performance is influenced by the non-sinusoidal current-phase relation (CPR) of NBJs. In this work, we measured the flux modulation of 10 asymmetric Nb SQUIDs based on three-dimensional NBJs, along with the CPR response in each device, which is mainly determined by the junction with the smaller critical current. By studying the CPR parameters (skewness Δ θ , critical current I c1 , and effective junction inductance L j ), together with the SQUID modulation characteristics (voltage modulation amplitude Δ I c R n and current modulation ratio Δ I c /2 I c1 ), we found that as I c1 increases from 0.6 μA to 6.6 μA and L j correspondingly decreases from 106 pH to 70 pH, the CPR skewness Δ θ increases from 0.2 rad to 1.5 rad. Over this range, Δ I c /2 I c1 decreases from 1.2 to 0.5, while Δ I c R n increases from about 0.06 mV to 0.22 mV. More specifically, Δ I c R n increases while Δ I c /2 I c1 decreases with increasing I c1 , whereas both quantities decrease with increasing L j . These results reveal a trade-off between intrinsic SQUID response and tolerance to readout noise, suggesting that improved performance can be achieved by engineering NBJs with increased I c1 and smaller L j .