Quantum systems are by their very nature fragile. The fundamental backaction on a state due to quantum measurement notwithstanding, there is also in practice often a destruction of the system itself due to the means of measurement. This becomes acutely problematic when we wish to make measurements of the same system at multiple times, or generate a large quantity of measurement statistics. One approach to circumventing this is the use of ancillary probes that couple to the system under investigation, and through their interaction, enable properties of the primary system to be imprinted onto and inferred from the ancillae. Here we highlight means by which continuous variable quantum modes (qumodes) can be employed to probe the thermodynamics of quantum systems in and out of equilibrium, including thermometry, reconstruction of the partition function, and reversible and irreversible work. We illustrate application of our results with the example of a spin-1/2 system in a transverse field.
Quantum systems are by their very nature fragile. The fundamental backaction on a state due to quantum measurement notwithstanding, there is also in practice often a destruction of the system itself due to the means of measurement. This becomes acutely problematic when we wish to make measurements of the same system at multiple times, or generate a large quantity of measurement statistics. One approach to circumventing this is the use of ancillary probes that couple to the system under investigation, and through their interaction, enable properties of the primary system to be imprinted onto and inferred from the ancillae. Here we highlight means by which continuous variable quantum modes (qumodes) can be employed to probe the thermodynamics of quantum systems in and out of equilibrium, including thermometry, reconstruction of the partition function, and reversible and irreversible work. We illustrate application of our results with the example of a spin-1/2 system in a transverse field.
The thermodynamics of quantum systems driven out of equilibrium has attracted increasing attention in the last decade, in connection with quantum information and statistical physics, and with a focus on non-classical signatures. While a first approach can deal with average thermodynamics quantities over ensembles, in order to establish the impact of quantum and environmental fluctuations during the evolution, a continuous quantum measurement of the open system is required. Here, we provide an introduction to the general theoretical framework to establish and interpret the thermodynamics for quantum systems whose nonequilibrium evolution is continuously monitored. We review the formalism of quantum trajectories and its consistent application to the thermodynamic scenario, where primary quantities such as work, heat, and entropy production can be defined at the stochastic level. The connection to irreversibility and fluctuation theorems is also discussed together with some recent developments, and we provide some simple examples to illustrate the general theoretical framework.
Measuring the temperature of a quantum system is an essential task in almost all aspects of quantum technologies. Theoretically, an optimal strategy for thermometry often requires measuring energy, which demands full accessibility over the entire system as well as a complex entangled measurement basis. In this paper, we take a different approach and show that single-qubit sequential measurements in the computational basis not only allow for precise thermometry of a many-body system, but may also achieve precision beyond the thermometry capacity of the probe at equilibrium, given by the Cram\'er-Rao bound. Thus, using consecutive single-qubit measurements of the probe out of equilibrium is, in most cases, very beneficial, as it achieves lower-temperature uncertainties and avoids demanding energy measurements when compared with probes at thermal equilibrium. To obtain such precision, the time between the two subsequent measurements should be smaller than the thermalization time so that the probe never thermalizes. Therefore, the nonequilibrium dynamics of the system continuously imprint information about temperature in the state of the probe. To demonstrate the generality of our findings, we consider thermometry in both spin chains and the Jaynes-Cummings model.
Estimating the temperature of a cold quantum system is difficult. Usually, one measures a well-understood thermal state and uses that prior knowledge to infer its temperature. In contrast, we introduce a method of thermometry that assumes no knowledge of the state of a system and is potentially non-destructive. Our method uses a universal temperature-dependence of the non-equilibrium dynamics of an initially thermal system coupled to a qubit probe that follows from the Tasaki-Crooks theorem for non-equilibrium work distributions. We provide examples, for a cold atom system, for which our thermometry protocol may retain accuracy and precision at subnanokelvin temperatures.
Measuring the temperature of a quantum system is an essential task in almost all aspects of quantum technologies. Theoretically, an optimal strategy for thermometry requires measuring energy which demands full accessibility over the entire system as well as complex entangled measurement basis. In this paper, we take a different approach and show that single qubit sequential measurements in the computational basis not only allows precise thermometry of a many-body system but may also achieve precision beyond the theoretical bound, avoiding demanding energy measurements at equilibrium. To obtain such precision, the time between the two subsequent measurements should be smaller than the thermalization time so that the probe never thermalizes. Therefore, the non-equilibrium dynamics of the system continuously imprint information about temperature in the state of the probe. This allows the sequential measurement scheme to reach precision beyond the accuracy achievable by complex energy measurements on equilibrium probes.
Quantum mechanics is widely recognised as being incomplete. It is not consistent with the second law of thermodynamics and does not provide a scientifically credible physical account of the measurement process, the means by which coherence is broken and classically observable states are recorded. This has led to many ad hoc assumptions being used to account for various properties of quantum systems, among which is the coherence time of quantum devices that determines their ability to perform computations. Here, we show that all these properties can be accommodated naturally and consistently in the context of mixing quantum systems which exhibit continuous spectra, as arises in the thermodynamic limit in quantum statistical mechanics and quantum gravity. In particular, for isolated systems we show that the time-reversal symmetry associated with unitary time evolution of the quantum state gives rise to time-symmetry breaking and a semi-group evolution which attains thermodynamic equilibrium at long times. Moreover, the emergence of this non-unitary time-asymmetry leads to microcanonical equilibrium states in which all quantum coherence is lost and is accompanied by the transformation of pure states into mixtures, leading in turn to an increase in entropy. Inclusion of a macroscopic measurement apparatus shows how the outcome of a measurement corresponds to the von Neumann projection postulate, arising with probabilities in conformance with the Born rule. The mathematical structure of the theory which applies to quantum systems with continuous spectra is closely analogous to the classical ergodic theory of dynamical systems and the conditions under which they attain equilibrium states.
The rather new field of quantum thermodynamics intends to derive thermodynamics from quantum mechanics, as well as to study thermodynamical behavior of quantum systems. It turns out that, indeed, thermalization can be obtained even for very small quantum systems due to the interaction with an appropriate environment. The consideration of an ensemble, as in statistical mechanics, is not necessary. However, the total system - consisting of system and environment - in quantum thermodynamics is usually considered to be closed. In particular, there exists no interaction with an external observer. Since quantum measurements typically influence the measured system, one may wonder which influence such an observation will have in the quantum thermodynamical setting. In this thesis, we study this influence of measurements in quantum thermodynamical systems. It turns out that various concepts known from statistical mechanics arise from such a "quantum thermodynamics under observation", although they do not have any meaning in the isolated quantum thermodynamical setting. The model discussed in the first part consists of a two-level system coupled to a large spin environment, the magnetization of which is measured periodically. This leads to quasi-classical trajectories for the system and - as in statistical mechanics - thermalization and temperature only have a meaning in terms of an ensemble average or a long-time average. Calculating these averages, we prove the ergodicity of the system. Interestingly, the entropy of the obtained attractor state depends on the time between the measurements and can be shown to be connected with the subjective lack of knowledge of the observer. In case of optimal measurements, the ensemble averaged state of the system under periodic measurements equals the state of the system in the quantum thermodynamical model without measurements. Introducing a detuning between system and environment, we find that the system can be prepared in almost arbitrary thermal states due to the periodic measurements. Even the creation of inversion becomes possible. As shown in numerical simulations, our results, which were analytically obtained for large environments, are even applicable to describe the behavior of the system coupled to small environments consisting of only a few spins. Besides measurements of the environment, we also study direct projective measurements of the system, as well as measurements with finite duration, obtaining that the dynamics of the system is almost independent of the concrete realization of the measurements. In the second part of the thesis, we discuss the meaning of temperature fluctuations in quantum thermodynamical systems. In statistical mechanics, there exist different approaches to the problem of temperature fluctuations, which lead to the well-known temperature fluctuation formula. The nature and operational accessibility of these fluctuations, however, remains rather unclear. We argue that according to quantum thermodynamics a system relaxes into a quasi-stationary thermal state and therefore the temperature does not fluctuate. However, since temperature is not an observable, it can only be determined indirectly. For modular systems, we show that the fluctuations of the temperature estimate obtained from a single energy measurement, indeed, are given by the temperature fluctuation formula derived in statistical mechanics, but only within a certain temperature range. The validity range of this formula increases with increasing size of the system. Thus, one can conclude that these "temperature fluctuations" can be interpreted as representing a fundamental limit for the instantaneous determination of temperature.