The quantum Zeno effect is the suppression of Hamiltonian evolution by repeated observation, which pins the system to an eigenstate of the measurement observable. Using measurement alone, control of the state can be achieved if the observable is slowly varied, so that the state tracks the now time-dependent eigenstate. We demonstrate this using a circuit-QED readout technique that couples to a dynamically controllable observable of a qubit. Continuous monitoring of the measurement record allows us to detect an escape from the eigenstate, thus serving as a built-in form of error detection. We show this by postselecting on realizations with high fidelity with respect to the target state. Our dynamical measurement operator technique offers a new tool for numerous forms of quantum feedback protocols, including adaptive measurements and rapid state purification.
The quantum Zeno effect is the suppression of Hamiltonian evolution by repeated observation, which pins the system to an eigenstate of the measurement observable. Using measurement alone, control of the state can be achieved if the observable is slowly varied, so that the state tracks the now time-dependent eigenstate. We demonstrate this using a circuit-QED readout technique that couples to a dynamically controllable observable of a qubit. Continuous monitoring of the measurement record allows us to detect an escape from the eigenstate, thus serving as a built-in form of error detection. We show this by postselecting on realizations with high fidelity with respect to the target state. Our dynamical measurement operator technique offers a new tool for numerous forms of quantum feedback protocols, including adaptive measurements and rapid state purification.
The Zeno effect, in which repeated observation freezes the dynamics of a quantum system, stands as an iconic oddity of quantum mechanics. When a measurement is unable to distinguish between states in a subspace, the dynamics within that subspace can be profoundly altered, leading to non-trivial behavior. Here we show that such a measurement can turn a non-interacting system with only single-qubit control into a two- or multi-qubit entangling gate, which we call a Zeno gate. The gate works by imparting a geometric phase on the system, conditioned on it lying within a particular nonlocal subspace. We derive simple closed-form expressions for the gate fidelity under a number of non-idealities and show that the gate is viable for implementation in circuit and cavity QED systems. More specifically, we illustrate the functioning of the gate via dispersive readout in both the Markovian and non-Markovian readout regimes, and derive conditions for longitudinal readout to ideally realize the gate.
The advance of experimental techniques in circuit quantum electrodynamics over last decadehas made it possible to monitor the evolution of qubits under continuous measurements in\nreal time . This kind of measurements, as compared to the discrete ones, provides a stream\nof information for feedback to alter the system's quantum dynamics continuously in a desired\nmanner, thus allowing broader possibilities. We obtain the information at a cost, the backaction on the states. However, the back-action turns out not to be just something disturbing \nand harmful to the control but instead can be harnessed, together with the control, to steer the system to our targets. \nThis thesis discusses one such application, namely to use measurements to create entanglement from remote qubits under locally optimal control. It is illustrated that by carefully designing symmetric measurement and feedback operators, we can construct efficient Markovian or non-Markovian protocols which generate N-qubit W,\ngeneral Dicke and Greenberger-Horne-Zeilinger states with high fidelity above 94% up to\nN = 100. In some cases, the fidelity even approaches unity. Following that, we describe how\nto take advantages of the continuous stream of information to protect the unitary dynamics of\na quantum system subject to noises. We develop a practical protocol for continuous operation\nof a quantum error correcting code for protection of coherent evolution due to an encoded\nHamiltonian against environmental errors, using the three qubit bit-flip code and bit-flip\nerrors as a canonical example. We demonstrate, for both quantum memory and adiabatic\nHamiltonians, that the protocol, once optimized, can significantly reduce logical errors with\na performance which is close to the theoretical limit of the bit-flip code's capability. In the\nadiabatic Hamiltonian case, we also propose some novel correction operators instead of the\nconventional ones to further reduce the logical errors.
Real-time monitoring of a quantum state provides powerful tools for studying the backaction of quantum measurement and performing quantum feedback. Historically, this monitoring capability has been the exclusive province of atomic and optical physics. This thesis describes the implementation of the first such high-fidelity readout scheme in a solid state circuit, a superconducting quantum bit (qubit) coupled to a microwave cavity in the circuit quantum electrodynamics (circuit QED) architecture. The qubit-state-dependent resonance frequency of the cavity is probed with a microwave drive tone, and the resulting signal amplified using a fast, ultralow-noise superconducting parametric amplifier. This arrangement enables the observation of quantum jumps between the qubit states in real time. The ability to monitor the qubit continuously with high fidelity and resolve quantum jumps can be used to investigate the backaction of the measurement process on the qubit. This thesis examines the quantum Zeno effect--where strong measurement inhibits the evolution of a quantum system-- as well as the transition to non-ideal measurement with increasing measurement strength in the circuit QED architecture, a phenomenon shown to be due to the upconversion of low-frequency dephasing noise. These data allow probes of ``universal'' flux noise in previously inaccessible frequency ranges. The work presented here opens the door for quantum feedback and error correction in solid-state quantum systems using continuous weak measurement.
The Zeno and anti-Zeno effects are features of measurement-driven quantum evolution where frequent measurement inhibits or accelerates the decay of a quantum state. Either type of evolution can emerge depending on the system-environment interaction and measurement method. In this experiment, we use a superconducting qubit to map out both types of Zeno effect in the presence of structured noise baths and variable measurement rates. We observe both the suppression and acceleration of qubit decay as repeated measurements are used to modulate the qubit spectrum causing the qubit to sample different portions of the bath. We compare the Zeno effects arising from dispersive energy measurements and purely dephasing "quasimeasurements," showing energy measurements are not necessary to accelerate or suppress the decay process.
The quantum Zeno effect asserts that quantum measurements inhibit simultaneous unitary dynamics when the “collapse” events are sufficiently strong and frequent. This applies in the limit of strong continuous measurement or dissipation. It is possible to implement a dissipative control that is known as “Zeno dragging” by dynamically varying the monitored observable, and hence also the eigenstates, which are attractors under Zeno dynamics. This is similar to adiabatic processes, in that the Zeno-dragging fidelity is highest when the rate of eigenstate change is slow compared to the measurement rate. We demonstrate here two theoretical methods for using such dynamics to achieve control of quantum systems. The first, which we shall refer to as “shortcut to Zeno,” is analogous to the shortcuts to adiabaticity (counterdiabatic driving) that are frequently used to accelerate unitary adiabatic evolution. In the second approach, we apply the Chantasri-Dressel-Jordan stochastic action [PRA 88, 042110 (2013)], and demonstrate that the extremal-probability readout paths derived from this are well suited to setting up a Pontryagin-style optimization of the Zeno-dragging schedule. A fundamental contribution of the latter approach is to show that an action suitable for measurement-driven control optimization can be derived quite generally from statistical arguments. Implementing these methods on the Zeno dragging of a qubit, we find that both approaches yield the same solution, namely, that the optimal control is a unitary that matches the motion of the Zeno-monitored eigenstate. We then show that such a solution can be more robust than a unitary-only operation and we comment on solvable generalizations of our qubit example embedded in larger systems. These methods open up new pathways toward systematically developing dynamic control of Zeno subspaces to realize dissipatively stabilized quantum operations. Published by the American Physical Society 2024
The quantum Zeno effect (QZE) reveals that frequent measurements can suppress quantum evolution; however, the impact of measurements on the real-space motion of a single atom remains insufficiently explored experimentally. In this work, we employ an optical trap as a measurement pulse and, by monitoring atomic loss, directly observe the QZE in the real-space motion of a single atom. We find that the action of measurement on the atom consists of a projective measurement followed by subsequent periodic unitary evolution, thereby providing an intuitive physical picture of measurement backaction across different timescales. We further investigate the effects of measurement frequency, strength, and spatial position, demonstrating that measurements pulse not only suppress the spatial spreading of the quantum state but also enable deterministic preparation of distinct motional states. Moreover, by dynamically controlling the trap position, we realize measurement-induced directional transport of a single atom, with a velocity exceeding the maximum allowed by the adiabatic condition. Overall, our results provide a direct experimental demonstration of the QZE in real space and establish a versatile framework for measurement-based control of atomic motion, opening new possibilities for motional-state engineering in cold-atom systems.