© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Measurement-based quantum feedback controls for quantum computation

Song Zhang

Published Jan 1, 2020• 1 citation

Abstract

The advance of experimental techniques in circuit quantum electrodynamics over last decadehas made it possible to monitor the evolution of qubits under continuous measurements in\nreal time . This kind of measurements, as compared to the discrete ones, provides a stream\nof information for feedback to alter the system's quantum dynamics continuously in a desired\nmanner, thus allowing broader possibilities. We obtain the information at a cost, the backaction on the states. However, the back-action turns out not to be just something disturbing \nand harmful to the control but instead can be harnessed, together with the control, to steer the system to our targets. \nThis thesis discusses one such application, namely to use measurements to create entanglement from remote qubits under locally optimal control. It is illustrated that by carefully designing symmetric measurement and feedback operators, we can construct efficient Markovian or non-Markovian protocols which generate N-qubit W,\ngeneral Dicke and Greenberger-Horne-Zeilinger states with high fidelity above 94% up to\nN = 100. In some cases, the fidelity even approaches unity. Following that, we describe how\nto take advantages of the continuous stream of information to protect the unitary dynamics of\na quantum system subject to noises. We develop a practical protocol for continuous operation\nof a quantum error correcting code for protection of coherent evolution due to an encoded\nHamiltonian against environmental errors, using the three qubit bit-flip code and bit-flip\nerrors as a canonical example. We demonstrate, for both quantum memory and adiabatic\nHamiltonians, that the protocol, once optimized, can significantly reduce logical errors with\na performance which is close to the theoretical limit of the bit-flip code's capability. In the\nadiabatic Hamiltonian case, we also propose some novel correction operators instead of the\nconventional ones to further reduce the logical errors.

Related papers

Locally optimal measurement-based quantum feedback with application to multiqubit entanglement generation

Shuya Zhang, Leigh S. Martin, K. Birgitta Whaley

We present a general approach to measurement-based quantum feedback that employs proportional and quantum state--(PaQS-) based feedback components to obtain locally optimal protocols. To demonstrate the power of the method, we first show that it reproduces many known feedback protocols and then apply it to generation of multipartite entanglement with an emphasis on remote entanglement, which requires spatially local feedback Hamiltonians. The symmetry of both measurement and feedback operators is found to be essential for construction of effective protocols. We show that under perfect measurement efficiency, entangled states can be reached with fidelity approaching unity under non-Markovian feedback control protocols, while Markovian protocols resulting from optimizing the feedback unitaries on ensemble-averaged states still yield fidelities above 94%. Application of the PaQS approach to generation of $N$-qubit $W$, general Dicke, and Greenberger-Horne-Zeilinger states shows that such entangled states can be efficiently generated with high fidelity, for up to $N=100$ in some cases.

arXiv:1807.02029•Physical Review A•Dec 21, 2020•19 citations

Continuous-time Quantum Error Correction with Noise-assisted Quantum Feedback

Gerardo Cardona, Alain Sarlette, Pierre Rouchon

We address the standard quantum error correction using the three-qubit bit-flip code, yet in continuous-time. This entails rendering a target manifold of quantum states globally attractive. Previous feedback designs could feature spurious equilibria, or resort to discrete kicks pushing the system away from these equilibria to ensure global asymptotic stability. We present a new approach that consists of introducing controls driven by Brownian motions. Unlike the previous methods, the resulting closed-loop dynamics can be shown to stabilize the target manifold exponentially. We further present a reduced-order filter formulation with classical probabilities. The exponential property is important to quantify the protection induced by the closed-loop error-correction dynamics against disturbances. We study numerically the performance of this control law and of the reduced filter.

arXiv:1902.00115•IFAC-PapersOnLine•Jan 1, 2019•10 citations

Continuous measurements for control of superconducting quantum circuits

Shay Hacohen-Gourgy, L. S. Martin

Developments over the last two decades have opened the path towards quantum technologies in many quantum systems, such as cold atoms, trapped ions, cavity-quantum electrodynamics (QED), and circuit-QED. However, the fragility of quantum states to the effects of measurement and decoherence still poses one of the greatest challenges in quantum technology. An imperative capability in this path is quantum feedback, as it enhances the control possibilities and allows for prolonging coherence times through quantum error correction. While changing parameters from shot to shot of an experiment or procedure can be considered feedback, quantum mechanics also allows for the intriguing possibility of performing feedback operations during the measurement process itself. This broader approach to measurements leads to the concepts of weak measurement, quantum trajectories, and numerous types of feedback with no classical analogs. These types of processes are the primary focus of this review. We introduce the concept of quantum feedback in the context of circuit-QED, an experimental platform with significant potential in quantum feedback and technology. We then discuss several experiments and see how they elucidate the concepts of continuous measurements and feedback. We conclude with an overview of coherent feedback, with application to fault-tolerant error correction.

arXiv:2009.07297•Advances in Physics X•Jan 1, 2020•18 citations

Experimental demonstration of continuous quantum error correction

William P. Livingston, Machiel Blok, Emmanuel Flurin +3 more

The storage and processing of quantum information are susceptible to external noise, resulting in computational errors. A powerful method to suppress these effects is quantum error correction. Typically, quantum error correction is executed in discrete rounds, using entangling gates and projective measurement on ancillary qubits to complete each round of error correction. Here we use direct parity measurements to implement a continuous quantum bit-flip correction code in a resource-efficient manner, eliminating entangling gates, ancillary qubits, and their associated errors. An FPGA controller actively corrects errors as they are detected, achieving an average bit-flip detection efficiency of up to 91%. Furthermore, the protocol increases the relaxation time of the protected logical qubit by a factor of 2.7 over the relaxation times of the bare comprising qubits. Our results showcase resource-efficient stabilizer measurements in a multi-qubit architecture and demonstrate how continuous error correction codes can address challenges in realizing a fault-tolerant system.

arXiv:2107.11398•Nature Communications•Apr 28, 2022•73 citations

Error correction of quantum system dynamics via measurement–feedback control

Du Ran, Zhi‐Cheng Shi, Zhen‐Biao Yang +2 more

Abstract In this paper, we generalize the application of a recently proposed quantum control technique called self-fulfilling prophesy (Uys et al 2018 Phys. Rev. A 97 060102) to achieve high-fidelity target quantum dynamics which are disturbed by unwanted external couplings, based on sequential unsharp measurements and tailored unitary feedback operations. The unsharp measurements are carried out periodically during system evolution, while the feedback operations are well-designed based on the eigenstates of the density matrices of the expected (without external couplings) dynamical states and their corresponding post-measurement states. By means of quantum state estimation, the mechanism of the measurement–feedback scheme is explained generally. For illustrative examples, we show that the dynamical trajectory errors caused by both constant couplings and time-varying couplings are substantially reduced in typical two-level and multi-level systems, i.e. the high-fidelity quantum dynamics are achieved. Furthermore, we discuss the influence of external coupling strength and measurement strength on system dynamics. Crucially, the scheme is universal and can be applied to any dimension systems. Thus, it may find applications in quantum information processing.

Journal of Physics B Atomic Molecular and Optical Physics•Jul 2, 2019•3 citations

Linear feedback stabilization for a continuously monitored qubit

Taylor L. Patti, Areeya Chantasri, Justin Dressel +1 more

In quantum mechanics, standard or strong measurement approaches generally result in the collapse of an ensemble of wavefunctions into a stochastic mixture of eigenstates. On the other hand, continuous or weak measurements have the propensity to dynamically control the evolution of quantum states over time, guiding the trajectory of the state into non-trivial superpositions and maintaining state purity. This kind of measurement-induced state steering is of great theoretical and experimental interest for the harnessing of quantum bits or "qubits", which are the fundamental unit of the emerging quantum computer. We explore continuous measurement-based quantum state stabilization through linear feedback control for a single quantum bit. By applying a time-varying Rabi drive that includes a linear feedback term, we show that the fixed points of the continuous measurement may be relocated. Analytical derivations of Itô Stochastic Master Equations being ideal models, we employ them to derive the projected ensemble average while utilizing numerical simulations to characterize the stability of the set of possible fixed points, as well as their modified collapse time-scales. We include the effects of realistic experimental non-idealities, such as environmental energy relaxation, dephasing, time-delay, and inefficient measurement. Ultimately, we discuss potential experimental implementations from collaborating universities.

Bulletin of the American Physical Society•Mar 13, 2017•0 citations

The advance of experimental techniques in circuit quantum electrodynamics over last decadehas made it possible to monitor the evolution of qubits under continuous measurements in\nreal time . This kind of measurements, as compared to the discrete ones, provides a stream\nof information for feedback to alter the system's quantum dynamics continuously in a desired\nmanner, thus allowing broader possibilities. We obtain the information at a cost, the backaction on the states. However, the back-action turns out not to be just something disturbing \nand harmful to the control but instead can be harnessed, together with the control, to steer the system to our targets. \nThis thesis discusses one such application, namely to use measurements to create entanglement from remote qubits under locally optimal control. It is illustrated that by carefully designing symmetric measurement and feedback operators, we can construct efficient Markovian or non-Markovian protocols which generate N-qubit W,\ngeneral Dicke and Greenberger-Horne-Zeilinger states with high fidelity above 94% up to\nN = 100. In some cases, the fidelity even approaches unity. Following that, we describe how\nto take advantages of the continuous stream of information to protect the unitary dynamics of\na quantum system subject to noises. We develop a practical protocol for continuous operation\nof a quantum error correcting code for protection of coherent evolution due to an encoded\nHamiltonian against environmental errors, using the three qubit bit-flip code and bit-flip\nerrors as a canonical example. We demonstrate, for both quantum memory and adiabatic\nHamiltonians, that the protocol, once optimized, can significantly reduce logical errors with\na performance which is close to the theoretical limit of the bit-flip code's capability. In the\nadiabatic Hamiltonian case, we also propose some novel correction operators instead of the\nconventional ones to further reduce the logical errors.

We present a general approach to measurement-based quantum feedback that employs proportional and quantum state--(PaQS-) based feedback components to obtain locally optimal protocols. To demonstrate the power of the method, we first show that it reproduces many known feedback protocols and then apply it to generation of multipartite entanglement with an emphasis on remote entanglement, which requires spatially local feedback Hamiltonians. The symmetry of both measurement and feedback operators is found to be essential for construction of effective protocols. We show that under perfect measurement efficiency, entangled states can be reached with fidelity approaching unity under non-Markovian feedback control protocols, while Markovian protocols resulting from optimizing the feedback unitaries on ensemble-averaged states still yield fidelities above 94%. Application of the PaQS approach to generation of

N

-qubit

W

, general Dicke, and Greenberger-Horne-Zeilinger states shows that such entangled states can be efficiently generated with high fidelity, for up to

N=100

in some cases.

We address the standard quantum error correction using the three-qubit bit-flip code, yet in continuous-time. This entails rendering a target manifold of quantum states globally attractive. Previous feedback designs could feature spurious equilibria, or resort to discrete kicks pushing the system away from these equilibria to ensure global asymptotic stability. We present a new approach that consists of introducing controls driven by Brownian motions. Unlike the previous methods, the resulting closed-loop dynamics can be shown to stabilize the target manifold exponentially. We further present a reduced-order filter formulation with classical probabilities. The exponential property is important to quantify the protection induced by the closed-loop error-correction dynamics against disturbances. We study numerically the performance of this control law and of the reduced filter.

Developments over the last two decades have opened the path towards quantum technologies in many quantum systems, such as cold atoms, trapped ions, cavity-quantum electrodynamics (QED), and circuit-QED. However, the fragility of quantum states to the effects of measurement and decoherence still poses one of the greatest challenges in quantum technology. An imperative capability in this path is quantum feedback, as it enhances the control possibilities and allows for prolonging coherence times through quantum error correction. While changing parameters from shot to shot of an experiment or procedure can be considered feedback, quantum mechanics also allows for the intriguing possibility of performing feedback operations during the measurement process itself. This broader approach to measurements leads to the concepts of weak measurement, quantum trajectories, and numerous types of feedback with no classical analogs. These types of processes are the primary focus of this review. We introduce the concept of quantum feedback in the context of circuit-QED, an experimental platform with significant potential in quantum feedback and technology. We then discuss several experiments and see how they elucidate the concepts of continuous measurements and feedback. We conclude with an overview of coherent feedback, with application to fault-tolerant error correction.

The storage and processing of quantum information are susceptible to external noise, resulting in computational errors. A powerful method to suppress these effects is quantum error correction. Typically, quantum error correction is executed in discrete rounds, using entangling gates and projective measurement on ancillary qubits to complete each round of error correction. Here we use direct parity measurements to implement a continuous quantum bit-flip correction code in a resource-efficient manner, eliminating entangling gates, ancillary qubits, and their associated errors. An FPGA controller actively corrects errors as they are detected, achieving an average bit-flip detection efficiency of up to 91%. Furthermore, the protocol increases the relaxation time of the protected logical qubit by a factor of 2.7 over the relaxation times of the bare comprising qubits. Our results showcase resource-efficient stabilizer measurements in a multi-qubit architecture and demonstrate how continuous error correction codes can address challenges in realizing a fault-tolerant system.

Abstract In this paper, we generalize the application of a recently proposed quantum control technique called self-fulfilling prophesy (Uys et al 2018 Phys. Rev. A 97 060102) to achieve high-fidelity target quantum dynamics which are disturbed by unwanted external couplings, based on sequential unsharp measurements and tailored unitary feedback operations. The unsharp measurements are carried out periodically during system evolution, while the feedback operations are well-designed based on the eigenstates of the density matrices of the expected (without external couplings) dynamical states and their corresponding post-measurement states. By means of quantum state estimation, the mechanism of the measurement–feedback scheme is explained generally. For illustrative examples, we show that the dynamical trajectory errors caused by both constant couplings and time-varying couplings are substantially reduced in typical two-level and multi-level systems, i.e. the high-fidelity quantum dynamics are achieved. Furthermore, we discuss the influence of external coupling strength and measurement strength on system dynamics. Crucially, the scheme is universal and can be applied to any dimension systems. Thus, it may find applications in quantum information processing.

In quantum mechanics, standard or strong measurement approaches generally result in the collapse of an ensemble of wavefunctions into a stochastic mixture of eigenstates. On the other hand, continuous or weak measurements have the propensity to dynamically control the evolution of quantum states over time, guiding the trajectory of the state into non-trivial superpositions and maintaining state purity. This kind of measurement-induced state steering is of great theoretical and experimental interest for the harnessing of quantum bits or "qubits", which are the fundamental unit of the emerging quantum computer. We explore continuous measurement-based quantum state stabilization through linear feedback control for a single quantum bit. By applying a time-varying Rabi drive that includes a linear feedback term, we show that the fixed points of the continuous measurement may be relocated. Analytical derivations of Itô Stochastic Master Equations being ideal models, we employ them to derive the projected ensemble average while utilizing numerical simulations to characterize the stability of the set of possible fixed points, as well as their modified collapse time-scales. We include the effects of realistic experimental non-idealities, such as environmental energy relaxation, dephasing, time-delay, and inefficient measurement. Ultimately, we discuss potential experimental implementations from collaborating universities.