Abstract Quantum networks distributed over distances greater than a few kilometres will be limited by the time required for information to propagate between nodes. We analyse protocols that are able to circumvent this bottleneck by employing multi-qubit nodes and multiplexing. For each protocol, we investigate the key network parameters that determine its performance. We model achievable entangling rates based on the anticipated near-term performance of nitrogen-vacancy centres and other promising network platforms. This analysis allows us to compare the potential of the proposed multiplexed protocols in different regimes. Moreover, by identifying the gains that may be achieved by improving particular network parameters, our analysis suggests the most promising avenues for research and development of prototype quantum networks.
Abstract Quantum networks distributed over distances greater than a few kilometres will be limited by the time required for information to propagate between nodes. We analyse protocols that are able to circumvent this bottleneck by employing multi-qubit nodes and multiplexing. For each protocol, we investigate the key network parameters that determine its performance. We model achievable entangling rates based on the anticipated near-term performance of nitrogen-vacancy centres and other promising network platforms. This analysis allows us to compare the potential of the proposed multiplexed protocols in different regimes. Moreover, by identifying the gains that may be achieved by improving particular network parameters, our analysis suggests the most promising avenues for research and development of prototype quantum networks.
Future quantum networks will enable the realisation of a large family of quantum protocols, hence allowing for implementation of various tasks ranging from quantum cryptography through quantum computing to quantum metrology.In this thesis we analyse and develop the building blocks of quantum repeater networks.These networks consist of quantum repeater nodes, which are equipped with quantum memories enabling storage of quantum information.The repeater nodes are connected using optical fibres that enable for the transmission of photonic quantum signals between the repeater nodes.We specifically focus on the two building blocks: remote entanglement generation and entanglement distillation.We then investigate various proof of principle quantum repeater schemes used for generating shared secret key between distant parties.The repeater schemes that we consider utilise one to three memory nodes capable of generating memory-photon entanglement.Finally, we introduce a novel framework for investigating a foundational aspect in the use of quantum communication related to the uncertainty principle.Efficient remote entanglement generation is an indispensable building block of most near-term quantum repeater networks.In this thesis we consider various remote entanglement generation schemes that permit multiplexing, which aims at increasing the throughput of this procedure.We find that for the specific schemes that are suitable for platforms with a single communication qubit and multiple memory qubits, the performance of the multiplexing approach is strongly dependent on the time it takes to perform local operations within the memory nodes.Entanglement distillation enables for filtering out the noise from imperfect entangled states using only local operations and classical communication.Using a general framework for optimising such schemes, which we have developed, we have proven optimality of specific generic and experimentally relevant distillation schemes.We have developed a general framework for optimising such schemes, which we have used to prove optimality of various generic and experimentally relevant distillation schemes.In designing proof of principle quantum repeater schemes we assume an informationtheoretic approach, which enables us to assess their performance in a hardware-agnostic way.We find that all the schemes that we consider can prove useful in specific parameter regimes for the nitrogen-vacancy centre platform.Moreover, we find that one scheme which has already been realised experimentally in the context of remote entanglement generation, is expected to significantly outperform every possible system based on direct communication without repeaters.However, our analysis shows that encapsulating the nitrogen-vacancy centres in optical cavities for the enhancement of the emission rates is a necessary requirement for such a successful demonstration of the first proofof-principle quantum repeater.xi xii SUMMARY Finally, we investigate the quantum uncertainty principle which is a fundamental feature of quantum mechanics, allowing for security in many quantum cryptographic protocols.We find that in a particular scenario, relevant from the perspective of quantum key distribution, a significant part of the observed uncertainty is in fact due to lack of information rather than intrinsic.If the eavesdropper could access that information, she would be able to much better, or in some cases even with certainty, guess the value of the raw bit of the generated key.
Near-term quantum networks face a bottleneck due to low quantum communication rates. This degrades performance both by lowering operating speeds and increasing qubit storage time in noisy memories, making some quantum internet applications infeasible. One way to circumvent this bottleneck is multiplexing: combining multiple signals into a single signal to improve the overall rate. Standard multiplexing techniques are classical in that they do not make use of coherence between quantum channels nor account for decoherence rates that vary during a protocol's execution. In this paper, we first derive semiclassical limits to multiplexing for many-qubit protocols and then introduce two techniques: single click quantum multiplexing and multiserver multiplexing. These can enable beyond-classical multiplexing advantages. We illustrate these techniques through three example applications: (1) entanglement generation between two asymetric quantum network nodes (i.e., repeaters or quantum servers with unequal memories), (2) remote state preparation between many end user devices and a single quantum node, and (3) remote state preparation between one end user device and many internetworked quantum nodes. By utilizing many noisy internetworked quantum devices instead of fewer low-noise devices, our multiplexing strategies enable new paths towards achieving high-speed many-qubit quantum network applications.
The Internet has revolutionized the way we live. It has enabled applications far beyond what it was originally built for, and it will continue to exceed our expectations for the future. Quantum computers, and the network that will connect them—the Quantum Internet— are likely going to follow the same path. Differently from normal computers, quantum computers can share a property called entanglement, which allows the qubits (quantum bits) to be connected at a much more fundamental level. This property enables a range of new applications that span secure communication to enhanced metrology. Over the past fifteen years, significant progress has been made in connecting rudimentary quantum network nodes via long-distance entanglement. Several quantum platforms have demonstrated entanglement generation between two physically separated qubits. In this thesis we take a significant step forward, both in terms of experimental complexity achieved, and in the abstraction of said complexity for future developments. Moving past two-node experiments required a fundamental redesign of our experimental apparatus, as well as developing the capabilities to control simultaneously the additional node. The first result of this thesis is building a three-node entanglement-based quantum network. We demonstrated distribution of Greenberger-Horne-Zeilinger states over the network, as well as a building block for larger networks: entanglement swapping. Differently from previous multi-node demonstrations, which relied on post-selection, our network is able to perform the entanglement distribution in a heralded fashion: a signal will notify the users that the protocol was successful, and that the state is ready to be used. The second result builds on the first, by adding control over a fifth qubit, improving the quality of the entanglement, and introducing a novel repetitive readout technique, to achieve quantum teleportation of a qubit from the third node to the first—nodes that do not share a direct entanglement channel. The third and final result is the demonstration of entanglement delivery using a quantum network stack. The Internet is built using a plethora of physical platforms: optical fibers, Ethernet cables, Wi-Fi, satellite signals etc. To abstract their functionality, and make applications work regardless of the underlying platform, a layered approach was developed in the 1970s (the Internet protocol). Taking inspiration from classical network stacks, we demonstrate the first two layers of a quantum network stack, the physical layer (where the qubits, lasers and signal generators live), and the link layer, which abstracts the concepts of qubit and entanglement generation such that they can be used by applications at the higher-layers, hiding the complexity of the quantum platform being used.
Abstract Quantum network coding (QNC) aims at alleviating quantum communication congestion in quantum networks. Although several QNC protocols have been presented, they cannot meet the practical requirements that part of source nodes intend to transmit their quantum states with same or different qubit numbers via the bottleneck network simultaneously. Here, the study presents a flexible QNC protocol by using quantum multiplexing. First, the entangled pairs are generated between adjacent nodes in a heralded way by using quantum multiplexing. Then the quantum memories of the source nodes and the ones of the corresponding target nodes are entangled when the intermediate nodes execute multiple rounds of entanglement swapping operations on their quantum memories. Finally, the quantum states are transmitted from the source nodes to their corresponding target nodes by means of quantum teleportation. Compared with the existing protocols, the protocol allows an arbitrary part of the source nodes to transmit their quantum states with same or different qubit numbers via the bottleneck network simultaneously, thereby exhibiting its flexibility.
Quantum Networks
Future quantum networks will provide the means to develop truly secure communication channels and will have applications in many other quantum-based technologies. Pompili et al. present a three-node remote quantum network based on solid-state spin qubits (nitrogen-vacancy centers in diamond) coupled by photons. The implementation of two quantum protocols on the network. entanglement distribution and entanglement swapping, illustrates a key platform for exploring, testing, and developing multinode quantum networks and quantum protocols.
Science , this issue p. [259][1]
[1]: /lookup/doi/10.1126/science.abg1919
We analyze how the performance of a quantum-repeater network depends on the protocol employed to distribute entanglement, and we find that the choice of repeater-to-repeater link protocol has a profound impact on entanglement-distribution rate as a function of hardware parameters. We develop numerical simulations of quantum networks using different protocols, where the repeater hardware is modeled in terms of key performance parameters, such as photon generation rate and collection efficiency. These parameters are motivated by recent experimental demonstrations in quantum dots, trapped ions, and nitrogen-vacancy centers in diamond. We find that a quantum-dot repeater with the newest protocol ('MidpointSource') delivers the highest entanglement-distribution rate for typical cases where there is low probability of establishing entanglement per transmission, and in some cases the rate is orders of magnitude higher than other schemes. Our simulation tools can be used to evaluate communication protocols as part of designing a large-scale quantum network.