Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Multi-Node Quantum Networks with Diamond Qubits

Matteo Pompili

Published Nov 26, 2021• 1 citation
Publisher

Abstract

The Internet has revolutionized the way we live. It has enabled applications far beyond what it was originally built for, and it will continue to exceed our expectations for the future. Quantum computers, and the network that will connect them—the Quantum Internet— are likely going to follow the same path. Differently from normal computers, quantum computers can share a property called entanglement, which allows the qubits (quantum bits) to be connected at a much more fundamental level. This property enables a range of new applications that span secure communication to enhanced metrology. Over the past fifteen years, significant progress has been made in connecting rudimentary quantum network nodes via long-distance entanglement. Several quantum platforms have demonstrated entanglement generation between two physically separated qubits. In this thesis we take a significant step forward, both in terms of experimental complexity achieved, and in the abstraction of said complexity for future developments. Moving past two-node experiments required a fundamental redesign of our experimental apparatus, as well as developing the capabilities to control simultaneously the additional node. The first result of this thesis is building a three-node entanglement-based quantum network. We demonstrated distribution of Greenberger-Horne-Zeilinger states over the network, as well as a building block for larger networks: entanglement swapping. Differently from previous multi-node demonstrations, which relied on post-selection, our network is able to perform the entanglement distribution in a heralded fashion: a signal will notify the users that the protocol was successful, and that the state is ready to be used. The second result builds on the first, by adding control over a fifth qubit, improving the quality of the entanglement, and introducing a novel repetitive readout technique, to achieve quantum teleportation of a qubit from the third node to the first—nodes that do not share a direct entanglement channel. The third and final result is the demonstration of entanglement delivery using a quantum network stack. The Internet is built using a plethora of physical platforms: optical fibers, Ethernet cables, Wi-Fi, satellite signals etc. To abstract their functionality, and make applications work regardless of the underlying platform, a layered approach was developed in the 1970s (the Internet protocol). Taking inspiration from classical network stacks, we demonstrate the first two layers of a quantum network stack, the physical layer (where the qubits, lasers and signal generators live), and the link layer, which abstracts the concepts of qubit and entanglement generation such that they can be used by applications at the higher-layers, hiding the complexity of the quantum platform being used.

DOI
10.4233/uuid:b125ec2d-e2af-4708-bccc-0a2357a533b1

Related papers

Entanglement Generation in Quantum Networks: Towards a universal and scalable quantum internet

Axel Dahlberg

Quantum mechanics shows that if one is able to generate and manipulate entanglement over a distance, one is able to perform certain tasks which are impossible using only classical communication. Classical communication refers to what is used in the Internet of today. A quantum internet would therefore bring new capabilities to our highly connected world. These capabilities both involve (1) the ability to perform tasks with are provably impossible in the current Internet, such as unconditionally secure communication, and (2) the ability to perform certain tasks much more efficient, such as distributed (quantum) computing or extending the baseline of telescopes. To be able to build a quantum internet, two main components are needed: (i) hardware that can store, manipulate and entangle qubits and (ii) a software stack to control the hardware. The core task of both of these is to generate entanglement to be used by applications. In this thesis we focus on the latter, i.e. the development of software and protocols that enable entanglement generation using capable hardware. To enable a certain application, one can certainly, in theory, manually specify each operation the hardware should perform, involving micro-wave pulses, lasers etc. However, in practice this is not feasible, if not to say impossible, due to the complexity of the operations needed, especially in a distributed system such as a quantum network. What is needed is a software stack, which can help with abstracting complexity away in multiple layers. This allows for someone to program a protocol in one layer without knowing all the details of the lower layers. In particular, one can abstract away the hardware details, in order to make higher-layer protocols and applications hardware-agnostic. Therefore, to be able to build a universal, efficient and scalable quantum internet, a software stack is crucial. In chapter 2 we start discussing the networking part of a software stack. Namely, we introduce a network stack for a quantum internet, drawing parallels to the IP/TCP-suite of the classical Internet. We continue with proposing a service and interface of the lowest layer of the network stack: the link layer. The link layer is here responsible for generating entanglement between nodes in a quantum network which are directly connected by a quantum link, i.e. a fiber cable. When developing a protocol or application it is very useful to be able to run it. Both to see if the intended ideas make sense and also to check that the implementation is actually correct. Currently we do not have quantum hardware that exposes a full-fledge API that can be used to execute applications. For this reason, it is very useful to be able to instead simulate the hardware in a way that exposes the same API as the hardware being developed. In chapter 3 we introduce SimulaQron for this exact purpose. Any application of a quantum internet will need entanglement in one way or another. However, entanglement is generally hard to generate and is usually the bottleneck when executing an application. We would therefore like to make use of the generated entanglement in the most optimal way. To be able to do this we need to understand how entanglement can be transformed and distributed in a quantum network. We study the entanglement of a particular class of states called graph states in chapters 4 to 9 and how these states can be transformed in a quantum network.

•Jan 6, 2021•0 citations

Entanglement-Enhanced Communication Networks

Janis Nötzel, Stephen DiAdamo

Building quantum networks ultimately requires strong use cases. As today's design and use of the Internet solely rests on the interconnection of classical computing devices, the development of hardware should take this dependence on an existing market into account. One might think quantum secure communication would be such a use case, but the entire design of the current Internet is built on the end-to-end argument and may reject the idea of implementing security as a physical layer protocol. On the other hand, higher data rates and reduced latency have been successfully used as key arguments for the conception of new communication standards. We thus argue that exactly these two figures of merit should be used again. We define two new initial stages of development of the quantum Internet, where in the first phase entanglement is only generated and used between network nodes, and in second phase entanglement swapping and thus distribution of entanglement over increasing distances becomes possible. In both phases, we show by simulation how the available new protocols increase the network capacity. Interestingly, following this envisioned approach can serve the needs of current market participants while paving the road for fully quantum applications in the future.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Oct 1, 2020•26 citations

Realization of a multinode quantum network of remote solid-state qubits

Matteo Pompili, Sophie Hermans, Simon Baier +9 more

The distribution of entangled states across the nodes of a future quantum internet will unlock fundamentally new technologies. Here, we report on the realization of a three-node entanglement-based quantum network. We combine remote quantum nodes based on diamond communication qubits into a scalable phase-stabilized architecture, supplemented with a robust memory qubit and local quantum logic. In addition, we achieve real-time communication and feed-forward gate operations across the network. We demonstrate two quantum network protocols without postselection: the distribution of genuine multipartite entangled states across the three nodes and entanglement swapping through an intermediary node. Our work establishes a key platform for exploring, testing, and developing multinode quantum network protocols and a quantum network control stack.

arXiv:2102.04471•Science•Apr 15, 2021•727 citations

Qubit teleportation between non-neighbouring nodes in a quantum network

Sophie Hermans, Matteo Pompili, Hans K. C. Beukers +3 more

Abstract Future quantum internet applications will derive their power from the ability to share quantum information across the network1,2. Quantum teleportation allows for the reliable transfer of quantum information between distant nodes, even in the presence of highly lossy network connections3. Although many experimental demonstrations have been performed on different quantum network platforms4–10, moving beyond directly connected nodes has, so far, been hindered by the demanding requirements on the pre-shared remote entanglement, joint qubit readout and coherence times. Here we realize quantum teleportation between remote, non-neighbouring nodes in a quantum network. The network uses three optically connected nodes based on solid-state spin qubits. The teleporter is prepared by establishing remote entanglement on the two links, followed by entanglement swapping on the middle node and storage in a memory qubit. We demonstrate that, once successful preparation of the teleporter is heralded, arbitrary qubit states can be teleported with fidelity above the classical bound, even with unit efficiency. These results are enabled by key innovations in the qubit readout procedure, active memory qubit protection during entanglement generation and tailored heralding that reduces remote entanglement infidelities. Our work demonstrates a prime building block for future quantum networks and opens the door to exploring teleportation-based multi-node protocols and applications2,11–13.

arXiv:2110.11373•Nature•May 25, 2022•357 citations

Experimental demonstration of entanglement delivery using a quantum network stack

Matteo Pompili, Carlo Delle Donne, Ingmar te Raa +10 more

Abstract Scaling current quantum communication demonstrations to a large-scale quantum network will require not only advancements in quantum hardware capabilities, but also robust control of such devices to bridge the gap in user demand. Moreover, the abstraction of tasks and services offered by the quantum network should enable platform-independent applications to be executed without the knowledge of the underlying physical implementation. Here we experimentally demonstrate, using remote solid-state quantum network nodes, a link layer, and a physical layer protocol for entanglement-based quantum networks. The link layer abstracts the physical-layer entanglement attempts into a robust, platform-independent entanglement delivery service. The system is used to run full state tomography of the delivered entangled states, as well as preparation of a remote qubit state on a server by its client. Our results mark a clear transition from physics experiments to quantum communication systems, which will enable the development and testing of components of future quantum networks.

arXiv:2111.11332•npj Quantum Information•Oct 15, 2022•84 citations

A link layer protocol for quantum networks

Axel Dahlberg, Skrzypczyk, M., Tim J. Coopmans +9 more

Quantum communication brings radically new capabilities that are provably impossible to attain in any classical network. Here, we take the first step from a physics experiment to a fully fledged quantum internet system. We propose a functional allocation of a quantum network stack and construct the first physical and link layer protocols that turn ad-hoc physics experiments producing heralded entanglement between quantum processors into a well-defined and robust service. This lays the groundwork for designing and implementing scalable control and application protocols in platform-independent software. To design our protocol, we identify use cases, as well as fundamental and technological design considerations of quantum network hardware, illustrated by considering the state-of-the-art quantum processor platform available to us (Nitrogen-Vacancy (NV) centers in diamond). sing a purpose built discrete-event simulator for quantum networks, we examine the robustness and performance of our protocol using extensive simulations on a supercomputing cluster. We perform a full implementation of our protocol, where we successfully validate the physical simulation model against data gathered from the NV hardware. We first observe that our protocol is robust even in a regime of exaggerated losses of classical control messages with only little impact on the performance of the system. We proceed to study the performance of our protocols for 169 distinct simulation scenarios, including tradeoffs between traditional performance metrics such as throughput and the quality of entanglement. Finally, we initiate the study of quantum network scheduling strategies to optimize protocol performance for different use cases.

•Jan 1, 2019•54 citations
The Internet has revolutionized the way we live. It has enabled applications far beyond what it was originally built for, and it will continue to exceed our expectations for the future. Quantum computers, and the network that will connect them—the Quantum Internet— are likely going to follow the same path. Differently from normal computers, quantum computers can share a property called entanglement, which allows the qubits (quantum bits) to be connected at a much more fundamental level. This property enables a range of new applications that span secure communication to enhanced metrology. Over the past fifteen years, significant progress has been made in connecting rudimentary quantum network nodes via long-distance entanglement. Several quantum platforms have demonstrated entanglement generation between two physically separated qubits. In this thesis we take a significant step forward, both in terms of experimental complexity achieved, and in the abstraction of said complexity for future developments. Moving past two-node experiments required a fundamental redesign of our experimental apparatus, as well as developing the capabilities to control simultaneously the additional node. The first result of this thesis is building a three-node entanglement-based quantum network. We demonstrated distribution of Greenberger-Horne-Zeilinger states over the network, as well as a building block for larger networks: entanglement swapping. Differently from previous multi-node demonstrations, which relied on post-selection, our network is able to perform the entanglement distribution in a heralded fashion: a signal will notify the users that the protocol was successful, and that the state is ready to be used. The second result builds on the first, by adding control over a fifth qubit, improving the quality of the entanglement, and introducing a novel repetitive readout technique, to achieve quantum teleportation of a qubit from the third node to the first—nodes that do not share a direct entanglement channel. The third and final result is the demonstration of entanglement delivery using a quantum network stack. The Internet is built using a plethora of physical platforms: optical fibers, Ethernet cables, Wi-Fi, satellite signals etc. To abstract their functionality, and make applications work regardless of the underlying platform, a layered approach was developed in the 1970s (the Internet protocol). Taking inspiration from classical network stacks, we demonstrate the first two layers of a quantum network stack, the physical layer (where the qubits, lasers and signal generators live), and the link layer, which abstracts the concepts of qubit and entanglement generation such that they can be used by applications at the higher-layers, hiding the complexity of the quantum platform being used.
Quantum mechanics shows that if one is able to generate and manipulate entanglement over a distance, one is able to perform certain tasks which are impossible using only classical communication. Classical communication refers to what is used in the Internet of today. A quantum internet would therefore bring new capabilities to our highly connected world. These capabilities both involve (1) the ability to perform tasks with are provably impossible in the current Internet, such as unconditionally secure communication, and (2) the ability to perform certain tasks much more efficient, such as distributed (quantum) computing or extending the baseline of telescopes. To be able to build a quantum internet, two main components are needed: (i) hardware that can store, manipulate and entangle qubits and (ii) a software stack to control the hardware. The core task of both of these is to generate entanglement to be used by applications. In this thesis we focus on the latter, i.e. the development of software and protocols that enable entanglement generation using capable hardware. To enable a certain application, one can certainly, in theory, manually specify each operation the hardware should perform, involving micro-wave pulses, lasers etc. However, in practice this is not feasible, if not to say impossible, due to the complexity of the operations needed, especially in a distributed system such as a quantum network. What is needed is a software stack, which can help with abstracting complexity away in multiple layers. This allows for someone to program a protocol in one layer without knowing all the details of the lower layers. In particular, one can abstract away the hardware details, in order to make higher-layer protocols and applications hardware-agnostic. Therefore, to be able to build a universal, efficient and scalable quantum internet, a software stack is crucial. In chapter 2 we start discussing the networking part of a software stack. Namely, we introduce a network stack for a quantum internet, drawing parallels to the IP/TCP-suite of the classical Internet. We continue with proposing a service and interface of the lowest layer of the network stack: the link layer. The link layer is here responsible for generating entanglement between nodes in a quantum network which are directly connected by a quantum link, i.e. a fiber cable. When developing a protocol or application it is very useful to be able to run it. Both to see if the intended ideas make sense and also to check that the implementation is actually correct. Currently we do not have quantum hardware that exposes a full-fledge API that can be used to execute applications. For this reason, it is very useful to be able to instead simulate the hardware in a way that exposes the same API as the hardware being developed. In chapter 3 we introduce SimulaQron for this exact purpose. Any application of a quantum internet will need entanglement in one way or another. However, entanglement is generally hard to generate and is usually the bottleneck when executing an application. We would therefore like to make use of the generated entanglement in the most optimal way. To be able to do this we need to understand how entanglement can be transformed and distributed in a quantum network. We study the entanglement of a particular class of states called graph states in chapters 4 to 9 and how these states can be transformed in a quantum network.
Building quantum networks ultimately requires strong use cases. As today's design and use of the Internet solely rests on the interconnection of classical computing devices, the development of hardware should take this dependence on an existing market into account. One might think quantum secure communication would be such a use case, but the entire design of the current Internet is built on the end-to-end argument and may reject the idea of implementing security as a physical layer protocol. On the other hand, higher data rates and reduced latency have been successfully used as key arguments for the conception of new communication standards. We thus argue that exactly these two figures of merit should be used again. We define two new initial stages of development of the quantum Internet, where in the first phase entanglement is only generated and used between network nodes, and in second phase entanglement swapping and thus distribution of entanglement over increasing distances becomes possible. In both phases, we show by simulation how the available new protocols increase the network capacity. Interestingly, following this envisioned approach can serve the needs of current market participants while paving the road for fully quantum applications in the future.
The distribution of entangled states across the nodes of a future quantum internet will unlock fundamentally new technologies. Here, we report on the realization of a three-node entanglement-based quantum network. We combine remote quantum nodes based on diamond communication qubits into a scalable phase-stabilized architecture, supplemented with a robust memory qubit and local quantum logic. In addition, we achieve real-time communication and feed-forward gate operations across the network. We demonstrate two quantum network protocols without postselection: the distribution of genuine multipartite entangled states across the three nodes and entanglement swapping through an intermediary node. Our work establishes a key platform for exploring, testing, and developing multinode quantum network protocols and a quantum network control stack.
Abstract Future quantum internet applications will derive their power from the ability to share quantum information across the network1,2. Quantum teleportation allows for the reliable transfer of quantum information between distant nodes, even in the presence of highly lossy network connections3. Although many experimental demonstrations have been performed on different quantum network platforms4–10, moving beyond directly connected nodes has, so far, been hindered by the demanding requirements on the pre-shared remote entanglement, joint qubit readout and coherence times. Here we realize quantum teleportation between remote, non-neighbouring nodes in a quantum network. The network uses three optically connected nodes based on solid-state spin qubits. The teleporter is prepared by establishing remote entanglement on the two links, followed by entanglement swapping on the middle node and storage in a memory qubit. We demonstrate that, once successful preparation of the teleporter is heralded, arbitrary qubit states can be teleported with fidelity above the classical bound, even with unit efficiency. These results are enabled by key innovations in the qubit readout procedure, active memory qubit protection during entanglement generation and tailored heralding that reduces remote entanglement infidelities. Our work demonstrates a prime building block for future quantum networks and opens the door to exploring teleportation-based multi-node protocols and applications2,11–13.
Abstract Scaling current quantum communication demonstrations to a large-scale quantum network will require not only advancements in quantum hardware capabilities, but also robust control of such devices to bridge the gap in user demand. Moreover, the abstraction of tasks and services offered by the quantum network should enable platform-independent applications to be executed without the knowledge of the underlying physical implementation. Here we experimentally demonstrate, using remote solid-state quantum network nodes, a link layer, and a physical layer protocol for entanglement-based quantum networks. The link layer abstracts the physical-layer entanglement attempts into a robust, platform-independent entanglement delivery service. The system is used to run full state tomography of the delivered entangled states, as well as preparation of a remote qubit state on a server by its client. Our results mark a clear transition from physics experiments to quantum communication systems, which will enable the development and testing of components of future quantum networks.
Quantum communication brings radically new capabilities that are provably impossible to attain in any classical network. Here, we take the first step from a physics experiment to a fully fledged quantum internet system. We propose a functional allocation of a quantum network stack and construct the first physical and link layer protocols that turn ad-hoc physics experiments producing heralded entanglement between quantum processors into a well-defined and robust service. This lays the groundwork for designing and implementing scalable control and application protocols in platform-independent software. To design our protocol, we identify use cases, as well as fundamental and technological design considerations of quantum network hardware, illustrated by considering the state-of-the-art quantum processor platform available to us (Nitrogen-Vacancy (NV) centers in diamond). sing a purpose built discrete-event simulator for quantum networks, we examine the robustness and performance of our protocol using extensive simulations on a supercomputing cluster. We perform a full implementation of our protocol, where we successfully validate the physical simulation model against data gathered from the NV hardware. We first observe that our protocol is robust even in a regime of exaggerated losses of classical control messages with only little impact on the performance of the system. We proceed to study the performance of our protocols for 169 distinct simulation scenarios, including tradeoffs between traditional performance metrics such as throughput and the quality of entanglement. Finally, we initiate the study of quantum network scheduling strategies to optimize protocol performance for different use cases.