Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1611.07919 · New Journal of Physics

Enhanced qubit readout using locally generated squeezing and inbuilt Purcell-decay suppression

Luke C. G. Govia, Aashish A Clerk

Published Feb 9, 2017• 22 citations
arXivHTMLPDF

Abstract

We introduce and analyze a dispersive qubit readout scheme where two-mode squeezing is generated directly in the measurement cavities. The resulting suppression of noise enables fast, high-fidelity readout of naturally weakly coupled qubits, and the possibility to protect strongly coupled qubits from decoherence by weakening their coupling. Unlike other approaches exploiting squeezing, our setup avoids the difficult task of transporting and injecting with high fidelity an externally generated squeezed state. Our setup is also surprisingly robust against unwanted non-QND backaction effects, as interference naturally suppresses Purcell decay: the system acts as its own Purcell filter. Our setup is compatible with the experimental state-of-the-art in circuit QED systems, but the basic idea could also be realized in other systems.

DOI
10.1088/1367-2630/aa5f7b

Related papers

Fast, high-fidelity Transmon readout with intrinsic Purcell protection via nonperturbative cross-Kerr coupling

Guillaume Beaulieu, Jun-Zhe Chen, Marco Scigliuzzo +5 more

Dispersive readout of superconducting qubits relies on a transverse capacitive coupling that hybridizes the qubit with the readout resonator, subjecting the qubit to Purcell decay and measurement-induced state transitions (MIST). Despite the widespread use of Purcell filters to suppress qubit decay and near-quantum-limited amplifiers, dispersive readout often lags behind single- and two-qubit gates in both speed and fidelity. Here, we experimentally demonstrate junction readout, a simple readout architecture that realizes a strong qubit-resonator cross-Kerr interaction without relying on a transverse coupling. This interaction is achieved by coupling a transmon qubit to its readout resonator through both a capacitance and a Josephson junction. By varying the qubit frequency, we show that this hybrid coupling provides intrinsic Purcell protection and enhanced resilience to MIST, enabling readout at high photon numbers. While junction readout is compatible with conventional linear measurement, in this work we exploit the nonlinear coupling to intentionally engineer a large Kerr nonlinearity in the resonator, enabling bifurcation-based readout. Using this approach, we achieve a 99.4 % assignment fidelity with a 68 ns integration time and a 98.4 % QND fidelity without an external Purcell filter or a near-quantum-limited amplifier. These results establish the junction readout architecture with bifurcation-based readout as a scalable and practical alternative to dispersive readout, enabling fast, high-fidelity qubit measurement with reduced hardware overhead.

quant-pharXiv:2601.04975•PRX Quantum•Jan 9, 2026•2 citations

Enhancing qubit readout fidelity with two-mode squeezing of the coherent measurement signal

Baleegh Abdo, William Shanks, Oblesh Jinka +1 more

The ability to perform high-fidelity quantum nondemolition qubit readout is pivotal for the realization of large and powerful quantum computers. Such readout of superconducting qubits is generally enabled by amplifying the weak dispersive measurement signals using phase-preserving quantum-limited Josephson amplifiers with sufficient gain to dilute the contribution of the added noise by the output chain. Here, we further enhance the qubit readout fidelity by (1) simultaneously measuring the two-mode squeezed states of the amplified readout signals at the signal and idler frequencies of the nondegenerate amplifier and (2) coherently combining them at the classical processing stage following a relative rotation that maximizes the signal to noise ratio of the qubit-encoded readout quadrature. Such readout scheme exhibits enhancement in the readout fidelity for all practical values of amplifier gain and noise added by the output chain and is fully compatible with frequency multiplexed setups used in large quantum processors.

quant-pharXiv:2603.15804•EPJ Quantum Technology•Mar 18, 2026•0 citations

Photon-Noise-Tolerant Dispersive Readout of a Superconducting Qubit Using a Nonlinear Purcell Filter

Yoshiki Sunada, Kenshi Yuki, Zhiling Wang +7 more

Residual noise photons in a readout resonator become a major source of dephasing for a superconducting qubit when the resonator is optimized for a fast, high-fidelity dispersive readout. Here, we propose and demonstrate a nonlinear Purcell filter that suppresses such an undesirable dephasing process without sacrificing the readout performance. When a readout pulse is applied, the filter automatically reduces the effective linewidth of the readout resonator, increasing the sensitivity of the qubit to the input field. The noise tolerance of the device we have fabricated is shown to be enhanced by a factor of 3 relative to a device with a linear filter. The measurement rate is enhanced by another factor of 3 by utilizing the bifurcation of the nonlinear filter. A readout fidelity of 99.4% and a quantum nondemolition fidelity of 99.2% are achieved using a 40-ns readout pulse. The nonlinear Purcell filter will be an effective tool for realizing a fast, high-fidelity readout without compromising the coherence time of the qubit. Published by the American Physical Society 2024

arXiv:2309.04315•PRX Quantum•Jan 19, 2024•33 citations

Design of Qubit Readout Circuit for Purcell-Rate Suppression by Two-Path Interference

Ahmad Salmanogli, Hesam Zandi, Mohsen Akbari

The Purcell effect, a common issue in qubit-resonator systems leading to both fidelity and nonclassicality losses is studied while its suppression is achieved using a novel qubit readout circuit design. Our approach utilizes a unique coupling architecture in which, the qubit first interacts with a filter resonator before coupling to the readout resonator. This configuration enables precise control over the Purcell decay rate and ac Stark factor without impacting on measuring time. The mentioned factor is highly sensitive to the coupling strength between the readout resonator and the filter, meaning that the factor adjustment directly impacts the qubit state detection. A major advantage of this design is that tuning the resonator-filter coupling strength is relatively straightforward, offering flexibility in fine-tuning ac Stark factor. This work extensively analyzes the system using full quantum mechanical theory, deriving the total Hamiltonian and investigates mode dynamics via quantum Langevin equations. Key parameters influencing the nonclassicality of output signals are also explored through quantum correlation metrics, including symplectic eigenvalues, quantum discord, and classical discord. The main goal is to find any compromises exsting between the ac Stark factor increasing and the quantum correlation created in the readout circuit. By optimizing the critical factors, by which the ac Stark factor mainly affected, the proposed design not only improves the distinguishability of the qubit states but also ensures robust nonclassicality in the output signals. Results demonstrate the potential of the proposed system to bridge the gap between a high fidelity readout and quantum correlation preservation in scalable quantum architectures.

arXiv:2411.07153•Nov 11, 2024•0 citations

Fast Multiplexed Superconducting-Qubit Readout with Intrinsic Purcell Filtering Using a Multiconductor Transmission Line

Peter Spring, Luka Milanovic, Yoshiki Sunada +4 more

Fast and accurate qubit measurement remains a critical challenge on the path to fault-tolerant quantum computing. In superconducting quantum circuits, fast qubit measurement has been achieved using a dispersively coupled resonator with a large externally limited linewidth. This necessitates the use of a Purcell filter that protects the qubit from relaxation through the readout channel. Here, we show that a readout resonator and filter resonator, coupled to each other both capacitively and inductively via a multiconductor transmission line, can produce a compact notch-filter circuit that effectively eliminates the Purcell decay channel through destructive interference. By utilizing linewidths as large as 42 MHz, we perform simultaneous readout of four qubits using a 56-ns integration window and benchmark an average assignment fidelity of 99.77%, with the highest qubit assignment fidelity exceeding 99.9%. Including the simulated readout ring-down time, the total readout duration was between 115 and 215 ns for the four qubits, which we anticipate can be reduced to around 100 ns with active ring-down pulse shaping. These results demonstrate a significant advancement in speed and fidelity for multiplexed superconducting-qubit readout.

arXiv:2409.04967•PRX Quantum•Jun 5, 2025•36 citations

The waves-in-space Purcell effect for superconducting qubits

Param Patel, Mingkang Xia, Chao Zhou +5 more

Quantum information processing, especially with quantum error correction, requires both long-lived qubits and fast, quantum non-demolition readout. In superconducting circuits this leads to the requirement to both strongly couple qubits, such as transmons, to readout modes while also protecting them from associated Purcell decay through the readout port. So-called Purcell filters can provide this protection, at the cost of significant increases in circuit components and complexity. However, as we demonstrate in this work, visualizing the qubit fields in space reveals locations where the qubit fields are strong and cavity fields weak; simply placing ports at these locations provides intrinsic Purcell protection. For a $λ/2$ readout mode in the `chip-in-tube' geometry, we show both millisecond level Purcell protection and, conversely, greatly enhanced Purcell decay (qubit lifetime of 1~$μ$s) simply by relocating the readout port. This method of integrating the Purcell protection into the qubit-cavity geometry can be generalized to other 3D implementations, such as post-cavities, as well as planar geometries. For qubit frequencies below the readout mode this effect is quite distinct from the multi-mode Purcell effect, which we demonstrate in a 3D-post geometry where we show both Purcell protection of the qubit while spoiling the quality factor of higher cavity harmonics to protect against dephasing due to stray photons in these modes.

arXiv:2503.11644•Mar 14, 2025•1 citation
We introduce and analyze a dispersive qubit readout scheme where two-mode squeezing is generated directly in the measurement cavities. The resulting suppression of noise enables fast, high-fidelity readout of naturally weakly coupled qubits, and the possibility to protect strongly coupled qubits from decoherence by weakening their coupling. Unlike other approaches exploiting squeezing, our setup avoids the difficult task of transporting and injecting with high fidelity an externally generated squeezed state. Our setup is also surprisingly robust against unwanted non-QND backaction effects, as interference naturally suppresses Purcell decay: the system acts as its own Purcell filter. Our setup is compatible with the experimental state-of-the-art in circuit QED systems, but the basic idea could also be realized in other systems.
Dispersive readout of superconducting qubits relies on a transverse capacitive coupling that hybridizes the qubit with the readout resonator, subjecting the qubit to Purcell decay and measurement-induced state transitions (MIST). Despite the widespread use of Purcell filters to suppress qubit decay and near-quantum-limited amplifiers, dispersive readout often lags behind single- and two-qubit gates in both speed and fidelity. Here, we experimentally demonstrate junction readout, a simple readout architecture that realizes a strong qubit-resonator cross-Kerr interaction without relying on a transverse coupling. This interaction is achieved by coupling a transmon qubit to its readout resonator through both a capacitance and a Josephson junction. By varying the qubit frequency, we show that this hybrid coupling provides intrinsic Purcell protection and enhanced resilience to MIST, enabling readout at high photon numbers. While junction readout is compatible with conventional linear measurement, in this work we exploit the nonlinear coupling to intentionally engineer a large Kerr nonlinearity in the resonator, enabling bifurcation-based readout. Using this approach, we achieve a 99.4 % assignment fidelity with a 68 ns integration time and a 98.4 % QND fidelity without an external Purcell filter or a near-quantum-limited amplifier. These results establish the junction readout architecture with bifurcation-based readout as a scalable and practical alternative to dispersive readout, enabling fast, high-fidelity qubit measurement with reduced hardware overhead.
The ability to perform high-fidelity quantum nondemolition qubit readout is pivotal for the realization of large and powerful quantum computers. Such readout of superconducting qubits is generally enabled by amplifying the weak dispersive measurement signals using phase-preserving quantum-limited Josephson amplifiers with sufficient gain to dilute the contribution of the added noise by the output chain. Here, we further enhance the qubit readout fidelity by (1) simultaneously measuring the two-mode squeezed states of the amplified readout signals at the signal and idler frequencies of the nondegenerate amplifier and (2) coherently combining them at the classical processing stage following a relative rotation that maximizes the signal to noise ratio of the qubit-encoded readout quadrature. Such readout scheme exhibits enhancement in the readout fidelity for all practical values of amplifier gain and noise added by the output chain and is fully compatible with frequency multiplexed setups used in large quantum processors.
Residual noise photons in a readout resonator become a major source of dephasing for a superconducting qubit when the resonator is optimized for a fast, high-fidelity dispersive readout. Here, we propose and demonstrate a nonlinear Purcell filter that suppresses such an undesirable dephasing process without sacrificing the readout performance. When a readout pulse is applied, the filter automatically reduces the effective linewidth of the readout resonator, increasing the sensitivity of the qubit to the input field. The noise tolerance of the device we have fabricated is shown to be enhanced by a factor of 3 relative to a device with a linear filter. The measurement rate is enhanced by another factor of 3 by utilizing the bifurcation of the nonlinear filter. A readout fidelity of 99.4% and a quantum nondemolition fidelity of 99.2% are achieved using a 40-ns readout pulse. The nonlinear Purcell filter will be an effective tool for realizing a fast, high-fidelity readout without compromising the coherence time of the qubit. Published by the American Physical Society 2024
The Purcell effect, a common issue in qubit-resonator systems leading to both fidelity and nonclassicality losses is studied while its suppression is achieved using a novel qubit readout circuit design. Our approach utilizes a unique coupling architecture in which, the qubit first interacts with a filter resonator before coupling to the readout resonator. This configuration enables precise control over the Purcell decay rate and ac Stark factor without impacting on measuring time. The mentioned factor is highly sensitive to the coupling strength between the readout resonator and the filter, meaning that the factor adjustment directly impacts the qubit state detection. A major advantage of this design is that tuning the resonator-filter coupling strength is relatively straightforward, offering flexibility in fine-tuning ac Stark factor. This work extensively analyzes the system using full quantum mechanical theory, deriving the total Hamiltonian and investigates mode dynamics via quantum Langevin equations. Key parameters influencing the nonclassicality of output signals are also explored through quantum correlation metrics, including symplectic eigenvalues, quantum discord, and classical discord. The main goal is to find any compromises exsting between the ac Stark factor increasing and the quantum correlation created in the readout circuit. By optimizing the critical factors, by which the ac Stark factor mainly affected, the proposed design not only improves the distinguishability of the qubit states but also ensures robust nonclassicality in the output signals. Results demonstrate the potential of the proposed system to bridge the gap between a high fidelity readout and quantum correlation preservation in scalable quantum architectures.
Fast and accurate qubit measurement remains a critical challenge on the path to fault-tolerant quantum computing. In superconducting quantum circuits, fast qubit measurement has been achieved using a dispersively coupled resonator with a large externally limited linewidth. This necessitates the use of a Purcell filter that protects the qubit from relaxation through the readout channel. Here, we show that a readout resonator and filter resonator, coupled to each other both capacitively and inductively via a multiconductor transmission line, can produce a compact notch-filter circuit that effectively eliminates the Purcell decay channel through destructive interference. By utilizing linewidths as large as 42 MHz, we perform simultaneous readout of four qubits using a 56-ns integration window and benchmark an average assignment fidelity of 99.77%, with the highest qubit assignment fidelity exceeding 99.9%. Including the simulated readout ring-down time, the total readout duration was between 115 and 215 ns for the four qubits, which we anticipate can be reduced to around 100 ns with active ring-down pulse shaping. These results demonstrate a significant advancement in speed and fidelity for multiplexed superconducting-qubit readout.
Quantum information processing, especially with quantum error correction, requires both long-lived qubits and fast, quantum non-demolition readout. In superconducting circuits this leads to the requirement to both strongly couple qubits, such as transmons, to readout modes while also protecting them from associated Purcell decay through the readout port. So-called Purcell filters can provide this protection, at the cost of significant increases in circuit components and complexity. However, as we demonstrate in this work, visualizing the qubit fields in space reveals locations where the qubit fields are strong and cavity fields weak; simply placing ports at these locations provides intrinsic Purcell protection. For a λ/2λ/2λ/2 readout mode in the `chip-in-tube' geometry, we show both millisecond level Purcell protection and, conversely, greatly enhanced Purcell decay (qubit lifetime of 1~μμμs) simply by relocating the readout port. This method of integrating the Purcell protection into the qubit-cavity geometry can be generalized to other 3D implementations, such as post-cavities, as well as planar geometries. For qubit frequencies below the readout mode this effect is quite distinct from the multi-mode Purcell effect, which we demonstrate in a 3D-post geometry where we show both Purcell protection of the qubit while spoiling the quality factor of higher cavity harmonics to protect against dephasing due to stray photons in these modes.