Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2503.11644

The waves-in-space Purcell effect for superconducting qubits

Param Patel, Mingkang Xia, Chao Zhou, Pinlei Lu, Xi Cao, Israa G. Yusuf, Jacob Repicky, Michael Hatridge

Published Mar 14, 2025• 1 citation
arXivHTMLPDF

Abstract

Quantum information processing, especially with quantum error correction, requires both long-lived qubits and fast, quantum non-demolition readout. In superconducting circuits this leads to the requirement to both strongly couple qubits, such as transmons, to readout modes while also protecting them from associated Purcell decay through the readout port. So-called Purcell filters can provide this protection, at the cost of significant increases in circuit components and complexity. However, as we demonstrate in this work, visualizing the qubit fields in space reveals locations where the qubit fields are strong and cavity fields weak; simply placing ports at these locations provides intrinsic Purcell protection. For a $λ/2$ readout mode in the `chip-in-tube' geometry, we show both millisecond level Purcell protection and, conversely, greatly enhanced Purcell decay (qubit lifetime of 1~$μ$s) simply by relocating the readout port. This method of integrating the Purcell protection into the qubit-cavity geometry can be generalized to other 3D implementations, such as post-cavities, as well as planar geometries. For qubit frequencies below the readout mode this effect is quite distinct from the multi-mode Purcell effect, which we demonstrate in a 3D-post geometry where we show both Purcell protection of the qubit while spoiling the quality factor of higher cavity harmonics to protect against dephasing due to stray photons in these modes.

DOI
10.48550/arxiv.2503.11644

Related papers

Broadband Purcell Filter for Fast Superconducting Qubit Reset and Readout

Yu Zhao, Zhixu Chen, Hanxian Liu +12 more

Rapid reset and readout of qubit states are essential for quantum error correction, yet accelerating these operations through stronger coupling to a dissipative environment inevitably increases qubit decay via the Purcell effect. Here we present a broadband Purcell filter that decouples the reset and readout paths, enabling both operations to be independently optimized without compromising qubit coherence. The filter employs two engineered notches - an intrinsic notch and a bandstop notch - to provide broadband Purcell protection, together with an additional reset stub that creates a reset mode below the protected band. To enable fast reset while suppressing filter-mediated interactions between qubits, we couple each qubit to a dedicated reset resonator. We experimentally demonstrate Purcell-limited relaxation times exceeding 1 ms across a 1.2 GHz bandwidth, simultaneously with 500 ns readout without a Josephson parametric amplifier and 100 ns reset with 99.6% efficiency. The reset resonator is designed with a deliberate kappa-chi mismatch, which suppresses photon-shot-noise-induced dephasing by a factor of 70 compared to the readout resonator. Our work provides a scalable hardware solution that resolves the traditional trade-off between fast qubit operations and qubit protection, advancing the prospects for fault-tolerant quantum computing.

quant-pharXiv:2609.14081•Sep 15, 2026•0 citations

Multimode Purcell filter for superconducting-qubit reset and readout with intrinsic Purcell protection

Xu-Yang Gu, Da’er Feng, Zhen-Yu Peng +17 more

Efficient qubit reset and leakage reduction are essential for scalable superconducting quantum computing, particularly in the context of quantum error correction. However, such operations often require additional on-chip components. Here, we propose and experimentally demonstrate a hardware-efficient approach to qubit reset and readout using a multi-mode Purcell filter in a superconducting quantum circuit. We exploit the inherent multi-mode structure of a coplanar waveguide resonator, using its fundamental and second-order modes for qubit reset and readout, respectively, thereby avoiding additional components. Implemented in a flip-chip architecture, our device achieves unconditional reset with residual excitation below 1\% in 220 ns, and a leakage reduction unit that selectively resets the second excited state within 62 ns with a residual $|f\rangle$ population of 6.1\%, accounting for the readout error. Despite the qubits being directly coupled to the filter in our configuration, the measured relaxation times are not degraded owing to intrinsic Purcell protection provided by an auxiliary mode. To our knowledge, this is the first experimental trial that exploits different-order modes of a microwave resonator for distinct qubit operations, representing a new direction toward scalable, hardware-efficient quantum processor design.

arXiv:2507.04676•Physical Review Applied•Mar 3, 2026•2 citations

Sub-resonant wideband superconducting Purcell filters

Basil M. Smitham, Jeronimo G. C. Martinez, Christie Chiu +1 more

In superconducting quantum devices, Purcell filters protect qubit information from decaying into external lines by reducing external coupling at qubit frequencies while maintaining it at readout frequencies. Here, we introduce and demonstrate a novel Purcell filter design that places the readout resonator frequencies in a "linewidth plateau" below the filter's first resonant mode. This approach, based on direct admittance engineering, can simultaneously achieve strong qubit protection and nearly constant external coupling across a wide readout bandwidth, addressing the traditional tradeoff between these properties. We first present a lumped-element analysis of our filters. We then experimentally demonstrate a compact on-chip linewidth-plateau filter, coupled to four resonators across its approximately 1 GHz readout band. We compare the measured linewidths to numerical predictions, and show how the filter protects a frequency-tunable transmon qubit from external decay. We envision that our flexible design paradigm will aid in efforts to create multiplexed readout architectures for superconducting quantum circuits, with well-controlled external couplings.

arXiv:2503.10750•Mar 13, 2025•0 citations

3D Integrated Embedded Filters for Superconducting Quantum Circuits

Waqas Ahmad, Gioele Consani, Mohammad Tasnimul Haque +2 more

Microwave filtering for superconducting qubits is a key element of quantum computing technology, enabling high coherence and fast state detection. This work presents the design and implementation of novel microwave Purcell filters for superconducting quantum circuits, integrated within a multilayer printed circuit board (PCB). The off-chip design removes all filter components from the qubit substrate, reducing device complexity, improving layout footprint and allowing better scalability to large qubit counts. Each embedded filter can couple up to nine readout resonators, enabling efficient multiplexed readout. Electromagnetic simulations of the filter predict a thousand-fold improvement in qubit isolation from the readout port. The design was experimentally validated under cryogenic conditions in conjunction with a 35-qubit device, demonstrating compatibility of the PCB-based filter with high-coherence superconducting qubits. The comparison of the measured qubit median T1 of 84 $μ$s with the expected radiative limit from electromagnetic simulations validated the presence of Purcell filtering in the system.

quant-pharXiv:2602.24003•Mar 2, 2026•0 citations

Fast Readout and Reset of a Superconducting Qubit Coupled to a Resonator with an Intrinsic Purcell Filter

Yoshiki Sunada, Shingo Kono, Jesper Ilves +4 more

Quantum information processing requires qubits that can retain their energy for a long time, and one also needs to be able to rapidly manipulate and measure the qubits. The authors utilize the spatial extent of a microwave resonator to meet both of these requirements. They protect a superconducting qubit from energy decay by simply shifting the position of the coupling port in a conventional device. This study demonstrates a simple technique that enables fast readout and reset of a superconducting qubit without compromising its lifetime. The technique could immediately be incorporated into the design of a superconducting quantum computer.

arXiv:2202.06202•Physical Review Applied•Apr 8, 2022•137 citations

Broadband bandpass Purcell filter for circuit quantum electrodynamics

Haoxiong Yan, Xuntao Wu, Andrew Lingenfelter +10 more

In circuit quantum electrodynamics, qubits are typically measured using dispersively coupled readout resonators. Coupling between each readout resonator and its electrical environment, however, reduces the qubit lifetime via the Purcell effect. Inserting a Purcell filter counters this effect while maintaining high readout fidelity but reduces measurement bandwidth and, thus, limits multiplexing readout capacity. In this Letter, we develop and implement a multi-stage bandpass Purcell filter that yields better qubit protection while simultaneously increasing measurement bandwidth and multiplexed capacity. We report on the experimental performance of our transmission-line-based implementation of this approach, a flexible design that can easily be integrated with current scaled-up, long coherence time superconducting quantum processors.

arXiv:2306.06258•Applied Physics Letters•Sep 25, 2023•15 citations
Quantum information processing, especially with quantum error correction, requires both long-lived qubits and fast, quantum non-demolition readout. In superconducting circuits this leads to the requirement to both strongly couple qubits, such as transmons, to readout modes while also protecting them from associated Purcell decay through the readout port. So-called Purcell filters can provide this protection, at the cost of significant increases in circuit components and complexity. However, as we demonstrate in this work, visualizing the qubit fields in space reveals locations where the qubit fields are strong and cavity fields weak; simply placing ports at these locations provides intrinsic Purcell protection. For a λ/2λ/2λ/2 readout mode in the `chip-in-tube' geometry, we show both millisecond level Purcell protection and, conversely, greatly enhanced Purcell decay (qubit lifetime of 1~μμμs) simply by relocating the readout port. This method of integrating the Purcell protection into the qubit-cavity geometry can be generalized to other 3D implementations, such as post-cavities, as well as planar geometries. For qubit frequencies below the readout mode this effect is quite distinct from the multi-mode Purcell effect, which we demonstrate in a 3D-post geometry where we show both Purcell protection of the qubit while spoiling the quality factor of higher cavity harmonics to protect against dephasing due to stray photons in these modes.
Rapid reset and readout of qubit states are essential for quantum error correction, yet accelerating these operations through stronger coupling to a dissipative environment inevitably increases qubit decay via the Purcell effect. Here we present a broadband Purcell filter that decouples the reset and readout paths, enabling both operations to be independently optimized without compromising qubit coherence. The filter employs two engineered notches - an intrinsic notch and a bandstop notch - to provide broadband Purcell protection, together with an additional reset stub that creates a reset mode below the protected band. To enable fast reset while suppressing filter-mediated interactions between qubits, we couple each qubit to a dedicated reset resonator. We experimentally demonstrate Purcell-limited relaxation times exceeding 1 ms across a 1.2 GHz bandwidth, simultaneously with 500 ns readout without a Josephson parametric amplifier and 100 ns reset with 99.6% efficiency. The reset resonator is designed with a deliberate kappa-chi mismatch, which suppresses photon-shot-noise-induced dephasing by a factor of 70 compared to the readout resonator. Our work provides a scalable hardware solution that resolves the traditional trade-off between fast qubit operations and qubit protection, advancing the prospects for fault-tolerant quantum computing.
Efficient qubit reset and leakage reduction are essential for scalable superconducting quantum computing, particularly in the context of quantum error correction. However, such operations often require additional on-chip components. Here, we propose and experimentally demonstrate a hardware-efficient approach to qubit reset and readout using a multi-mode Purcell filter in a superconducting quantum circuit. We exploit the inherent multi-mode structure of a coplanar waveguide resonator, using its fundamental and second-order modes for qubit reset and readout, respectively, thereby avoiding additional components. Implemented in a flip-chip architecture, our device achieves unconditional reset with residual excitation below 1\% in 220 ns, and a leakage reduction unit that selectively resets the second excited state within 62 ns with a residual ∣f⟩|f\rangle∣f⟩ population of 6.1\%, accounting for the readout error. Despite the qubits being directly coupled to the filter in our configuration, the measured relaxation times are not degraded owing to intrinsic Purcell protection provided by an auxiliary mode. To our knowledge, this is the first experimental trial that exploits different-order modes of a microwave resonator for distinct qubit operations, representing a new direction toward scalable, hardware-efficient quantum processor design.
In superconducting quantum devices, Purcell filters protect qubit information from decaying into external lines by reducing external coupling at qubit frequencies while maintaining it at readout frequencies. Here, we introduce and demonstrate a novel Purcell filter design that places the readout resonator frequencies in a "linewidth plateau" below the filter's first resonant mode. This approach, based on direct admittance engineering, can simultaneously achieve strong qubit protection and nearly constant external coupling across a wide readout bandwidth, addressing the traditional tradeoff between these properties. We first present a lumped-element analysis of our filters. We then experimentally demonstrate a compact on-chip linewidth-plateau filter, coupled to four resonators across its approximately 1 GHz readout band. We compare the measured linewidths to numerical predictions, and show how the filter protects a frequency-tunable transmon qubit from external decay. We envision that our flexible design paradigm will aid in efforts to create multiplexed readout architectures for superconducting quantum circuits, with well-controlled external couplings.
Microwave filtering for superconducting qubits is a key element of quantum computing technology, enabling high coherence and fast state detection. This work presents the design and implementation of novel microwave Purcell filters for superconducting quantum circuits, integrated within a multilayer printed circuit board (PCB). The off-chip design removes all filter components from the qubit substrate, reducing device complexity, improving layout footprint and allowing better scalability to large qubit counts. Each embedded filter can couple up to nine readout resonators, enabling efficient multiplexed readout. Electromagnetic simulations of the filter predict a thousand-fold improvement in qubit isolation from the readout port. The design was experimentally validated under cryogenic conditions in conjunction with a 35-qubit device, demonstrating compatibility of the PCB-based filter with high-coherence superconducting qubits. The comparison of the measured qubit median T1 of 84 μμμs with the expected radiative limit from electromagnetic simulations validated the presence of Purcell filtering in the system.
Quantum information processing requires qubits that can retain their energy for a long time, and one also needs to be able to rapidly manipulate and measure the qubits. The authors utilize the spatial extent of a microwave resonator to meet both of these requirements. They protect a superconducting qubit from energy decay by simply shifting the position of the coupling port in a conventional device. This study demonstrates a simple technique that enables fast readout and reset of a superconducting qubit without compromising its lifetime. The technique could immediately be incorporated into the design of a superconducting quantum computer.
In circuit quantum electrodynamics, qubits are typically measured using dispersively coupled readout resonators. Coupling between each readout resonator and its electrical environment, however, reduces the qubit lifetime via the Purcell effect. Inserting a Purcell filter counters this effect while maintaining high readout fidelity but reduces measurement bandwidth and, thus, limits multiplexing readout capacity. In this Letter, we develop and implement a multi-stage bandpass Purcell filter that yields better qubit protection while simultaneously increasing measurement bandwidth and multiplexed capacity. We report on the experimental performance of our transmission-line-based implementation of this approach, a flexible design that can easily be integrated with current scaled-up, long coherence time superconducting quantum processors.