Rapid reset and readout of qubit states are essential for quantum error correction, yet accelerating these operations through stronger coupling to a dissipative environment inevitably increases qubit decay via the Purcell effect. Here we present a broadband Purcell filter that decouples the reset and readout paths, enabling both operations to be independently optimized without compromising qubit coherence. The filter employs two engineered notches - an intrinsic notch and a bandstop notch - to provide broadband Purcell protection, together with an additional reset stub that creates a reset mode below the protected band. To enable fast reset while suppressing filter-mediated interactions between qubits, we couple each qubit to a dedicated reset resonator. We experimentally demonstrate Purcell-limited relaxation times exceeding 1 ms across a 1.2 GHz bandwidth, simultaneously with 500 ns readout without a Josephson parametric amplifier and 100 ns reset with 99.6% efficiency. The reset resonator is designed with a deliberate kappa-chi mismatch, which suppresses photon-shot-noise-induced dephasing by a factor of 70 compared to the readout resonator. Our work provides a scalable hardware solution that resolves the traditional trade-off between fast qubit operations and qubit protection, advancing the prospects for fault-tolerant quantum computing.
Rapid reset and readout of qubit states are essential for quantum error correction, yet accelerating these operations through stronger coupling to a dissipative environment inevitably increases qubit decay via the Purcell effect. Here we present a broadband Purcell filter that decouples the reset and readout paths, enabling both operations to be independently optimized without compromising qubit coherence. The filter employs two engineered notches - an intrinsic notch and a bandstop notch - to provide broadband Purcell protection, together with an additional reset stub that creates a reset mode below the protected band. To enable fast reset while suppressing filter-mediated interactions between qubits, we couple each qubit to a dedicated reset resonator. We experimentally demonstrate Purcell-limited relaxation times exceeding 1 ms across a 1.2 GHz bandwidth, simultaneously with 500 ns readout without a Josephson parametric amplifier and 100 ns reset with 99.6% efficiency. The reset resonator is designed with a deliberate kappa-chi mismatch, which suppresses photon-shot-noise-induced dephasing by a factor of 70 compared to the readout resonator. Our work provides a scalable hardware solution that resolves the traditional trade-off between fast qubit operations and qubit protection, advancing the prospects for fault-tolerant quantum computing.
Efficient qubit reset and leakage reduction are essential for scalable superconducting quantum computing, particularly in the context of quantum error correction. However, such operations often require additional on-chip components. Here, we propose and experimentally demonstrate a hardware-efficient approach to qubit reset and readout using a multi-mode Purcell filter in a superconducting quantum circuit. We exploit the inherent multi-mode structure of a coplanar waveguide resonator, using its fundamental and second-order modes for qubit reset and readout, respectively, thereby avoiding additional components. Implemented in a flip-chip architecture, our device achieves unconditional reset with residual excitation below 1\% in 220 ns, and a leakage reduction unit that selectively resets the second excited state within 62 ns with a residual ∣f⟩ population of 6.1\%, accounting for the readout error. Despite the qubits being directly coupled to the filter in our configuration, the measured relaxation times are not degraded owing to intrinsic Purcell protection provided by an auxiliary mode. To our knowledge, this is the first experimental trial that exploits different-order modes of a microwave resonator for distinct qubit operations, representing a new direction toward scalable, hardware-efficient quantum processor design.
Achieving high-fidelity qubit readout and reset while maintaining qubit coherence is crucial for quantum error correction and advanced quantum algorithms. Here, we design and experimentally demonstrate a scalable architecture based on frequency-tunable nonlinear Purcell filters, which enables flexible readout and rapid unconditional reset of multiple superconducting qubits. Our readout protocol dynamically adjusts the effective linewidth of the readout resonator through a tunable Purcell filter, optimizing the signal-to-noise ratio during measurement while suppressing photon noise during idle periods. Combined with a multilevel readout protocol, we achieve the highest readout fidelity of 99.3% without any quantum-limited amplifier, even with a small dispersive shift. Moreover, by leveraging a reset channel formed via the adjacent coupling between the filter and the coupler, we realize unconditional qubit reset of both leakage-induced |2⟩ and |1⟩ states within 200 ns and reset of the |1⟩ state alone within 75 ns, with error rates ≤1%. The filter also mitigates both photon-induced dephasing and the Purcell effect, thereby preserving qubit coherence. This scalable Purcell filter architecture shows exceptional performance in qubit readout, reset, and protection, marking it as a promising hardware component for advancing fault-tolerant quantum computing systems.
High-fidelity readout with strong Purcell protection of qubit coherence is essential for scalable superconducting quantum processors, yet the finite passband and sizable footprint of conventional band-pass Purcell filters make them hard to scale. Here we introduce a scalable edge-pass Purcell filter that separates the readout band from the protected qubit band by a single transmission edge, freeing the readout resonators from bandwidth constraint. Depending on whether the transmitting band lies above or below the cutoff, the compact network is realized as a high-pass filter (HPF) or a low-pass filter (LPF). The HPF reaches an average readout fidelity of 99.46(4)% (up to 99.56%) with a 150-ns pulse, and the LPF reaches 99.49(3)% (up to 99.57%) with a 130-ns pulse. The average single-qubit gate fidelities are 99.94% (HPF) and 99.93% (LPF). Relative to the filter-free Purcell limit, the filters substantially extend the qubit lifetime, and the Purcell protection deepens at higher filter order. In addition, an intrinsic dissipation mode of the filter offers a qubit-reset channel. This leads to a compact architecture that unifies fast, high-fidelity readout, Purcell protection, and effective reset within a single filter for large-scale fault-tolerant quantum computation.
Fast, high-fidelity, and low back-action readout plays a crucial role in the advancement of quantum error correction (QEC). Here, we demonstrate high-performance multiplexed readout of superconducting qubits using a tunable broadband Purcell filter, effectively resolving the fundamental trade-off between measurement speed and photon-noise-induced dephasing. By dynamically tuning the filter parameters, we suppress photon-noise-induced dephasing by a factor of 7 in idle status, while enabling rapid, high-fidelity readout in measurement status. We achieve 99.6\% single-shot readout fidelity with 100~ns readout pulse, limited primarily by relaxation errors during readout. Using a multilevel readout protocol, we further attain 99.9\% fidelity in 50~ns. Simultaneous readout of three qubits using 100~ns pulses achieves an average fidelity of 99.5\% with low crosstalk. Additionally, the readout exhibits high quantum-nondemolition (QND) performance: 99.4\% fidelity over repeated measurements and a low leakage rate below 0.1\%. Building on the tunable broadband filter, we further propose a scalable readout scheme for surface code QEC with enhanced multiplexing capability, offering a promising solution for fast and scalable QEC.
Fast and accurate qubit measurement remains a critical challenge on the path to fault-tolerant quantum computing. In superconducting quantum circuits, fast qubit measurement has been achieved using a dispersively coupled resonator with a large externally limited linewidth. This necessitates the use of a Purcell filter that protects the qubit from relaxation through the readout channel. Here, we show that a readout resonator and filter resonator, coupled to each other both capacitively and inductively via a multiconductor transmission line, can produce a compact notch-filter circuit that effectively eliminates the Purcell decay channel through destructive interference. By utilizing linewidths as large as 42 MHz, we perform simultaneous readout of four qubits using a 56-ns integration window and benchmark an average assignment fidelity of 99.77%, with the highest qubit assignment fidelity exceeding 99.9%. Including the simulated readout ring-down time, the total readout duration was between 115 and 215 ns for the four qubits, which we anticipate can be reduced to around 100 ns with active ring-down pulse shaping. These results demonstrate a significant advancement in speed and fidelity for multiplexed superconducting-qubit readout.
High-fidelity qubit readout in circuit QED requires suppressing relaxation due to the Purcell effect, typically achieved through the use of Purcell filters. A key limitation of existing Purcell filter implementations is their large footprint. In this work, we propose a compact notch Purcell filter based on a Josephson junction (JJ) chain embedded in series with the readout resonator. We analytically derive the conditions for operation in the dispersive regime using a lumped-element model, and validate the concept through an example design that is analyzed through both lumped-element and full electromagnetic simulations. The results indicate that the proposed architecture achieves a Purcell decay time exceeding 1 ms, with a dispersive shift and resonator linewidth of approximately 10 MHz, enabling fast, high signal-tonoise ratio readout. As typical of notch filters, also this solution exhibits an inherent parameter sensitivity. SQUIDs can be used for post-fabrication frequency tuning, at the expense of an increase of the number of required control lines.