Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2608.13627

A scalable edge-pass Purcell filter for high-fidelity readout of superconducting qubits

Xudong Liao, Yuan Li, Sainan Huai, Shuyi Pan, Zhenxing Zhang, Zhiwen Zong, Kunliang Bu, Yulei Ye, Wen Zheng, Xinsheng Tan, Yang Yu, Xiaopei Yang, Tianqi Cai, Shengyu Zhang

quant-phSubmitted Aug 13, 2026• Announced Aug 14, 2026• 0 citations
arXivHTMLPDF

Abstract

High-fidelity readout with strong Purcell protection of qubit coherence is essential for scalable superconducting quantum processors, yet the finite passband and sizable footprint of conventional band-pass Purcell filters make them hard to scale. Here we introduce a scalable edge-pass Purcell filter that separates the readout band from the protected qubit band by a single transmission edge, freeing the readout resonators from bandwidth constraint. Depending on whether the transmitting band lies above or below the cutoff, the compact network is realized as a high-pass filter (HPF) or a low-pass filter (LPF). The HPF reaches an average readout fidelity of 99.46(4)% (up to 99.56%) with a 150-ns pulse, and the LPF reaches 99.49(3)% (up to 99.57%) with a 130-ns pulse. The average single-qubit gate fidelities are 99.94% (HPF) and 99.93% (LPF). Relative to the filter-free Purcell limit, the filters substantially extend the qubit lifetime, and the Purcell protection deepens at higher filter order. In addition, an intrinsic dissipation mode of the filter offers a qubit-reset channel. This leads to a compact architecture that unifies fast, high-fidelity readout, Purcell protection, and effective reset within a single filter for large-scale fault-tolerant quantum computation.

Comments
9 pages, 4 figures

Related papers

Broadband Purcell Filter for Fast Superconducting Qubit Reset and Readout

Yu Zhao, Zhixu Chen, Hanxian Liu +12 more

Rapid reset and readout of qubit states are essential for quantum error correction, yet accelerating these operations through stronger coupling to a dissipative environment inevitably increases qubit decay via the Purcell effect. Here we present a broadband Purcell filter that decouples the reset and readout paths, enabling both operations to be independently optimized without compromising qubit coherence. The filter employs two engineered notches - an intrinsic notch and a bandstop notch - to provide broadband Purcell protection, together with an additional reset stub that creates a reset mode below the protected band. To enable fast reset while suppressing filter-mediated interactions between qubits, we couple each qubit to a dedicated reset resonator. We experimentally demonstrate Purcell-limited relaxation times exceeding 1 ms across a 1.2 GHz bandwidth, simultaneously with 500 ns readout without a Josephson parametric amplifier and 100 ns reset with 99.6% efficiency. The reset resonator is designed with a deliberate kappa-chi mismatch, which suppresses photon-shot-noise-induced dephasing by a factor of 70 compared to the readout resonator. Our work provides a scalable hardware solution that resolves the traditional trade-off between fast qubit operations and qubit protection, advancing the prospects for fault-tolerant quantum computing.

quant-pharXiv:2609.14081•Sep 15, 2026•0 citations

Flexible Readout and Unconditional Reset for Superconducting Multiqubit Processors with Tunable Purcell Filters

Yong-Xi Xiao, Da’er Feng, Xu-Yang Gu +18 more

Achieving high-fidelity qubit readout and reset while maintaining qubit coherence is crucial for quantum error correction and advanced quantum algorithms. Here, we design and experimentally demonstrate a scalable architecture based on frequency-tunable nonlinear Purcell filters, which enables flexible readout and rapid unconditional reset of multiple superconducting qubits. Our readout protocol dynamically adjusts the effective linewidth of the readout resonator through a tunable Purcell filter, optimizing the signal-to-noise ratio during measurement while suppressing photon noise during idle periods. Combined with a multilevel readout protocol, we achieve the highest readout fidelity of 99.3% without any quantum-limited amplifier, even with a small dispersive shift. Moreover, by leveraging a reset channel formed via the adjacent coupling between the filter and the coupler, we realize unconditional qubit reset of both leakage-induced |2⟩ and |1⟩ states within 200 ns and reset of the |1⟩ state alone within 75 ns, with error rates ≤1%. The filter also mitigates both photon-induced dephasing and the Purcell effect, thereby preserving qubit coherence. This scalable Purcell filter architecture shows exceptional performance in qubit readout, reset, and protection, marking it as a promising hardware component for advancing fault-tolerant quantum computing systems.

arXiv:2507.06988•Physical Review Letters•Jan 16, 2026•3 citations

Fast Multiplexed Superconducting-Qubit Readout with Intrinsic Purcell Filtering Using a Multiconductor Transmission Line

Peter Spring, Luka Milanovic, Yoshiki Sunada +4 more

Fast and accurate qubit measurement remains a critical challenge on the path to fault-tolerant quantum computing. In superconducting quantum circuits, fast qubit measurement has been achieved using a dispersively coupled resonator with a large externally limited linewidth. This necessitates the use of a Purcell filter that protects the qubit from relaxation through the readout channel. Here, we show that a readout resonator and filter resonator, coupled to each other both capacitively and inductively via a multiconductor transmission line, can produce a compact notch-filter circuit that effectively eliminates the Purcell decay channel through destructive interference. By utilizing linewidths as large as 42 MHz, we perform simultaneous readout of four qubits using a 56-ns integration window and benchmark an average assignment fidelity of 99.77%, with the highest qubit assignment fidelity exceeding 99.9%. Including the simulated readout ring-down time, the total readout duration was between 115 and 215 ns for the four qubits, which we anticipate can be reduced to around 100 ns with active ring-down pulse shaping. These results demonstrate a significant advancement in speed and fidelity for multiplexed superconducting-qubit readout.

arXiv:2409.04967•PRX Quantum•Jun 5, 2025•36 citations

Multimode Purcell filter for superconducting-qubit reset and readout with intrinsic Purcell protection

Xu-Yang Gu, Da’er Feng, Zhen-Yu Peng +17 more

Efficient qubit reset and leakage reduction are essential for scalable superconducting quantum computing, particularly in the context of quantum error correction. However, such operations often require additional on-chip components. Here, we propose and experimentally demonstrate a hardware-efficient approach to qubit reset and readout using a multi-mode Purcell filter in a superconducting quantum circuit. We exploit the inherent multi-mode structure of a coplanar waveguide resonator, using its fundamental and second-order modes for qubit reset and readout, respectively, thereby avoiding additional components. Implemented in a flip-chip architecture, our device achieves unconditional reset with residual excitation below 1\% in 220 ns, and a leakage reduction unit that selectively resets the second excited state within 62 ns with a residual $|f\rangle$ population of 6.1\%, accounting for the readout error. Despite the qubits being directly coupled to the filter in our configuration, the measured relaxation times are not degraded owing to intrinsic Purcell protection provided by an auxiliary mode. To our knowledge, this is the first experimental trial that exploits different-order modes of a microwave resonator for distinct qubit operations, representing a new direction toward scalable, hardware-efficient quantum processor design.

arXiv:2507.04676•Physical Review Applied•Mar 3, 2026•2 citations

High-suppression-ratio and wide bandwidth four-stage Purcell filter for multiplexed superconducting qubit readout

Yibiao Zhou, Xiao Cai, Yuzhen Zheng +4 more

Purcell filters, which serve to suppress electromagnetic radiation and enhance the readout efficiency of qubit, are an indispensable component in superconducting quantum chips. With the increasing scale of quantum chips, the requirements for the performance and scalability of Purcell filters are becoming more stringent. In this report, a novel four-stage Purcell filter that enables fast measurement without exacerbating environmental damping of the qubits is presented. The design approach of the filter is derived from the serial and parallel configurations of λ/4 resonant cavities. The filter exhibits exceptional passband-to-stopband isolation, reaching up to 40 dB of isolation within the transition range of 400 MHz. Furthermore, the filter boasts a wide bandwidth for both the stopband and the passband, with the stopband ranging from 4 to 5.5 GHz and the passband extending from 5.8 to 6.5 GHz. In terms of spatial arrangement, each filter can be connected to over ten readout resonators for qubit readout. This innovative Purcell filter will significantly contribute to the development of high quality, scalable superconducting quantum chips.

Journal of Applied Physics•Jan 8, 2024•5 citations

A Compact Broadband Purcell Filter for Superconducting Quantum Circuits in a 3D Flip-Chip Architecture

Zhen Luo, Lea Richard, Ivan Tsitsilin +4 more

Fast and high-fidelity qubit readout requires strong coupling between the readout resonator and the feedline. However, such coupling unavoidably enhances qubit decay through the Purcell effect. We present a four-pole broadband Purcell filter implemented on a 3D flip-chip platform to overcome this trade-off. The filter provides a flat 1 GHz passband centered at 7.68 GHz and achieves more than 45 dB suppression at typical qubit frequencies. We demonstrate the filter's compatibility with multiplexed readout using a test chip that integrates six floating readout resonators strongly coupled within the passband. The chip is fabricated using a 150 nm Niobium (Nb) thin-film process and characterized at 20 mK in a cryogenic measurement setup. We also develop an analytical model that accurately captures the filter response and determines the resonance frequencies and external quality factors of the floating resonators directly from their physical geometry, enabling rapid circuit synthesis and design optimization. The proposed design is compact and fabrication-tolerant, making it a practical solution for large-scale superconducting quantum processors.

quant-pharXiv:2603.16693•IEEE Transactions on Microwave Theory and Techniques•Mar 18, 2026•0 citations
High-fidelity readout with strong Purcell protection of qubit coherence is essential for scalable superconducting quantum processors, yet the finite passband and sizable footprint of conventional band-pass Purcell filters make them hard to scale. Here we introduce a scalable edge-pass Purcell filter that separates the readout band from the protected qubit band by a single transmission edge, freeing the readout resonators from bandwidth constraint. Depending on whether the transmitting band lies above or below the cutoff, the compact network is realized as a high-pass filter (HPF) or a low-pass filter (LPF). The HPF reaches an average readout fidelity of 99.46(4)% (up to 99.56%) with a 150-ns pulse, and the LPF reaches 99.49(3)% (up to 99.57%) with a 130-ns pulse. The average single-qubit gate fidelities are 99.94% (HPF) and 99.93% (LPF). Relative to the filter-free Purcell limit, the filters substantially extend the qubit lifetime, and the Purcell protection deepens at higher filter order. In addition, an intrinsic dissipation mode of the filter offers a qubit-reset channel. This leads to a compact architecture that unifies fast, high-fidelity readout, Purcell protection, and effective reset within a single filter for large-scale fault-tolerant quantum computation.
Rapid reset and readout of qubit states are essential for quantum error correction, yet accelerating these operations through stronger coupling to a dissipative environment inevitably increases qubit decay via the Purcell effect. Here we present a broadband Purcell filter that decouples the reset and readout paths, enabling both operations to be independently optimized without compromising qubit coherence. The filter employs two engineered notches - an intrinsic notch and a bandstop notch - to provide broadband Purcell protection, together with an additional reset stub that creates a reset mode below the protected band. To enable fast reset while suppressing filter-mediated interactions between qubits, we couple each qubit to a dedicated reset resonator. We experimentally demonstrate Purcell-limited relaxation times exceeding 1 ms across a 1.2 GHz bandwidth, simultaneously with 500 ns readout without a Josephson parametric amplifier and 100 ns reset with 99.6% efficiency. The reset resonator is designed with a deliberate kappa-chi mismatch, which suppresses photon-shot-noise-induced dephasing by a factor of 70 compared to the readout resonator. Our work provides a scalable hardware solution that resolves the traditional trade-off between fast qubit operations and qubit protection, advancing the prospects for fault-tolerant quantum computing.
Achieving high-fidelity qubit readout and reset while maintaining qubit coherence is crucial for quantum error correction and advanced quantum algorithms. Here, we design and experimentally demonstrate a scalable architecture based on frequency-tunable nonlinear Purcell filters, which enables flexible readout and rapid unconditional reset of multiple superconducting qubits. Our readout protocol dynamically adjusts the effective linewidth of the readout resonator through a tunable Purcell filter, optimizing the signal-to-noise ratio during measurement while suppressing photon noise during idle periods. Combined with a multilevel readout protocol, we achieve the highest readout fidelity of 99.3% without any quantum-limited amplifier, even with a small dispersive shift. Moreover, by leveraging a reset channel formed via the adjacent coupling between the filter and the coupler, we realize unconditional qubit reset of both leakage-induced |2⟩ and |1⟩ states within 200 ns and reset of the |1⟩ state alone within 75 ns, with error rates ≤1%. The filter also mitigates both photon-induced dephasing and the Purcell effect, thereby preserving qubit coherence. This scalable Purcell filter architecture shows exceptional performance in qubit readout, reset, and protection, marking it as a promising hardware component for advancing fault-tolerant quantum computing systems.
Fast and accurate qubit measurement remains a critical challenge on the path to fault-tolerant quantum computing. In superconducting quantum circuits, fast qubit measurement has been achieved using a dispersively coupled resonator with a large externally limited linewidth. This necessitates the use of a Purcell filter that protects the qubit from relaxation through the readout channel. Here, we show that a readout resonator and filter resonator, coupled to each other both capacitively and inductively via a multiconductor transmission line, can produce a compact notch-filter circuit that effectively eliminates the Purcell decay channel through destructive interference. By utilizing linewidths as large as 42 MHz, we perform simultaneous readout of four qubits using a 56-ns integration window and benchmark an average assignment fidelity of 99.77%, with the highest qubit assignment fidelity exceeding 99.9%. Including the simulated readout ring-down time, the total readout duration was between 115 and 215 ns for the four qubits, which we anticipate can be reduced to around 100 ns with active ring-down pulse shaping. These results demonstrate a significant advancement in speed and fidelity for multiplexed superconducting-qubit readout.
Efficient qubit reset and leakage reduction are essential for scalable superconducting quantum computing, particularly in the context of quantum error correction. However, such operations often require additional on-chip components. Here, we propose and experimentally demonstrate a hardware-efficient approach to qubit reset and readout using a multi-mode Purcell filter in a superconducting quantum circuit. We exploit the inherent multi-mode structure of a coplanar waveguide resonator, using its fundamental and second-order modes for qubit reset and readout, respectively, thereby avoiding additional components. Implemented in a flip-chip architecture, our device achieves unconditional reset with residual excitation below 1\% in 220 ns, and a leakage reduction unit that selectively resets the second excited state within 62 ns with a residual ∣f⟩|f\rangle∣f⟩ population of 6.1\%, accounting for the readout error. Despite the qubits being directly coupled to the filter in our configuration, the measured relaxation times are not degraded owing to intrinsic Purcell protection provided by an auxiliary mode. To our knowledge, this is the first experimental trial that exploits different-order modes of a microwave resonator for distinct qubit operations, representing a new direction toward scalable, hardware-efficient quantum processor design.
Purcell filters, which serve to suppress electromagnetic radiation and enhance the readout efficiency of qubit, are an indispensable component in superconducting quantum chips. With the increasing scale of quantum chips, the requirements for the performance and scalability of Purcell filters are becoming more stringent. In this report, a novel four-stage Purcell filter that enables fast measurement without exacerbating environmental damping of the qubits is presented. The design approach of the filter is derived from the serial and parallel configurations of λ/4 resonant cavities. The filter exhibits exceptional passband-to-stopband isolation, reaching up to 40 dB of isolation within the transition range of 400 MHz. Furthermore, the filter boasts a wide bandwidth for both the stopband and the passband, with the stopband ranging from 4 to 5.5 GHz and the passband extending from 5.8 to 6.5 GHz. In terms of spatial arrangement, each filter can be connected to over ten readout resonators for qubit readout. This innovative Purcell filter will significantly contribute to the development of high quality, scalable superconducting quantum chips.
Fast and high-fidelity qubit readout requires strong coupling between the readout resonator and the feedline. However, such coupling unavoidably enhances qubit decay through the Purcell effect. We present a four-pole broadband Purcell filter implemented on a 3D flip-chip platform to overcome this trade-off. The filter provides a flat 1 GHz passband centered at 7.68 GHz and achieves more than 45 dB suppression at typical qubit frequencies. We demonstrate the filter's compatibility with multiplexed readout using a test chip that integrates six floating readout resonators strongly coupled within the passband. The chip is fabricated using a 150 nm Niobium (Nb) thin-film process and characterized at 20 mK in a cryogenic measurement setup. We also develop an analytical model that accurately captures the filter response and determines the resonance frequencies and external quality factors of the floating resonators directly from their physical geometry, enabling rapid circuit synthesis and design optimization. The proposed design is compact and fabrication-tolerant, making it a practical solution for large-scale superconducting quantum processors.