Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1606.01897

Feedback-tuned noise-resilient gates for encoded spin qubits

Pascal Cerfontaine, Tim Botzem, Simon Humpohl, Dieter Schuh, Dominique Bougeard, Hendrik Bluhm

Published Jun 6, 2016• 9 citations
arXivHTMLPDF

Abstract

Two level quantum mechanical systems like spin 1/2 particles lend themselves as a natural qubit implementation. However, encoding a single qubit in several spins reduces the resources necessary for qubit control and can protect from decoherence channels. While several varieties of such encoded spin qubits have been implemented, accurate control remains challenging, and leakage out of the subspace of valid qubit states is a potential issue. Here, we realize high-fidelity single qubit operations for a qubit encoded in two electron spins in GaAs quantum dots by iterative tuning of the all-electrical control pulses. Using randomized benchmarking, we find an average gate fidelity of $\mathcal{F} = (98.5 \pm 0.1)\,\%$ and determine the leakage rate between the computational subspace and other states to $\mathcal{L} = (0.4\pm0.1)\,\%$. These results also demonstrate that high fidelity gates can be realized even in the presence of nuclear spins as in III-V semiconductors.

DOI
10.48550/arxiv.1606.01897

Related papers

High-fidelity single- and two-qubit gates for two-electron spin qubits

Pascal Cerfontaine

A key ingredient for fault-tolerant quantum computers are sufficiently accurate logic gates on single and multiple qubits in the presence of decohering noise. In this thesis, we theoretically develop and experimentally demonstrate such high-fidelity quantum gates for semiconductor-based quantum computing. Specifically, we consider a qubit encoded in the singlet and one triplet state of two electron spins in GaAs. While its potential for optical coupling makes GaAs an attractive material, highly auto-correlated magnetic field noise from fluctuating nuclear spins leads to considerably lower coherence times than for Si-based devices, where nuclear spins can be removed by isotopic purification. In addition to noise, the control methods used in earlier experiments are based on unrealistic approximations. For these reasons, fidelities well above 99 %, as required by current quantum error correction (QEC) schemes, have not been obtained before this thesis. To tackle these issues, we extend the filter function formalism to describe quantum gates and processes in the presence of experimentally relevant non-Markovian noise. Since this formalism can consider all relevant noise sources in a computationally efficient manner, it can be used to find optimal control pulses by numerical optimization, leading to predicted single-qubit gate fidelities of 99.9 %. Furthermore, we deal with the considerable control challenges associated with this qubit type by experimental calibration of the optimized control pulses. To this end, we extend our previous experimental gate set calibration (GSC) routine to remove systematic gate errors on an arbitrary number of qubits. We apply the numerically optimized single-qubit control pulses to our GaAs sample and experimentally calibrate them with GSC. This procedure yields an average gate fidelity of 99.50 ± 0.04 % and a low leakage rate of 0.13 ± 0.03 % out of the computational subspace, characterized by randomized benchmarking. We also optimize realistic two-qubit control pulses, considering current control hardware as well as interqubit Coulomb and exchange coupling that cannot be fully turned off. Using measured noise spectra, we show that two-qubit gate fidelities of 99.90 % can be reached in GaAs, while 99.99 % can be achieved in Si. These results demonstrate that high-fidelity gates can be realized even in the presence of nuclear spins as in GaAs.

•Jan 1, 2019•0 citations

High-fidelity entangling gate for double-quantum-dot spin qubits

John M. Nichol, Lucas Orona, Shannon P. Harvey +4 more

Abstract Electron spins in semiconductors are promising qubits because their long coherence times enable nearly 10 9 coherent quantum gate operations. However, developing a scalable high-fidelity two-qubit gate remains challenging. Here, we demonstrate an entangling gate between two double-quantum-dot spin qubits in GaAs by using a magnetic field gradient between the two dots in each qubit to suppress decoherence due to charge noise. When the magnetic gradient dominates the voltage-controlled exchange interaction between electrons, qubit coherence times increase by an order of magnitude. Using randomized benchmarking, we measure single-qubit gate fidelities of ~ 99%, and through self-consistent quantum measurement, state, and process tomography, we measure an entangling gate fidelity of 90%. In the future, operating double quantum dot spin qubits with large gradients in nuclear-spin-free materials, such as Si, should enable a two-qubit gate fidelity surpassing the threshold for fault-tolerant quantum information processing.

arXiv:1608.04258•npj Quantum Information•Jan 19, 2017•220 citations

Simultaneous single-qubit driving of semiconductor spin qubits at the fault-tolerant threshold

William I. L. Lawrie, Maximilian Rimbach-Russ, F. van Riggelen +6 more

Practical Quantum computing hinges on the ability to control large numbers of qubits with high fidelity. Quantum dots define a promising platform due to their compatibility with semiconductor manufacturing. Moreover, high-fidelity operations above 99.9% have been realized with individual qubits, though their performance has been limited to 98.67% when driving two qubits simultaneously. Here we present single-qubit randomized benchmarking in a two-dimensional array of spin qubits, finding native gate fidelities as high as 99.992(1)%. Furthermore, we benchmark single qubit gate performance while simultaneously driving two and four qubits, utilizing a novel benchmarking technique called N-copy randomized benchmarking, designed for simple experimental implementation and accurate simultaneous gate fidelity estimation. We find two- and four-copy randomized benchmarking fidelities of 99.905(8)% and 99.34(4)% respectively, and that next-nearest neighbor pairs are highly robust to cross-talk errors. These characterizations of single-qubit gate quality are crucial for scaling up quantum information technology.

arXiv:2109.07837•Nature Communications•Jun 19, 2023•79 citations

High-fidelity and robust two-qubit gates for quantum-dot spin qubits in silicon

Chia-Hsien Huang, Chih Hwan Yang, Chien-Chang Chen +2 more

A two-qubit controlled-not (cnot) gate, realized by a controlled-phase (C-phase) gate combined with single-qubit gates, has been experimentally implemented recently for quantum-dot spin qubits in isotopically enriched silicon, a promising solid-state system for practical quantum computation. In the experiments, the single-qubit gates have been demonstrated with fault-tolerant control fidelity, but the infidelity of the two-qubit C-phase gate is, primarily due to the electrical noise, still higher than the required error threshold for fault-tolerant quantum computation (FTQC). Here, by taking the realistic system parameters and the experimental constraints on the control pulses into account, we construct experimentally realizable high-fidelity cnot gates robust against electrical noise with the experimentally measured $1/{f}^{1.01}$ noise spectrum and also against the uncertainty in the interdot tunnel coupling amplitude. Our fine-tuned optimal cnot gate has about two orders of magnitude improvement in gate infidelity over the ideal C-phase gate constructed without considering any noise effect. Furthermore, within the same control framework, high-fidelity and robust single-qubit gates can also be constructed, paving the way for large-scale FTQC.

arXiv:1806.02858•Physical Review A•Apr 4, 2019•19 citations

Fidelity benchmarks for two-qubit gates in silicon

W. Huang, Chih Hwan Yang, K. W. Chan +10 more

Abstract Universal quantum computation will require qubit technology based on a scalable platform1, together with quantum error correction protocols that place strict limits on the maximum infidelities for one- and two-qubit gate operations2, 3. Although various qubit systems have shown high fidelities at the one-qubit level4–10, the only solid-state qubits manufactured using standard lithographic techniques that have demonstrated two-qubit fidelities near the fault-tolerance threshold6 have been in superconductor systems. Silicon-based quantum dot qubits are also amenable to large-scale fabrication and can achieve high single-qubit gate fidelities (exceeding 99.9 per cent) using isotopically enriched silicon11, 12. Two-qubit gates have now been demonstrated in a number of systems13–15, but as yet an accurate assessment of their fidelities using Clifford-based randomized benchmarking, which uses sequences of randomly chosen gates to measure the error, has not been achieved. Here, for qubits encoded on the electron spin states of gate-defined quantum dots, we demonstrate Bell state tomography with fidelities ranging from 80 to 89 per cent, and two-qubit randomized benchmarking with an average Clifford gate fidelity of 94.7 per cent and an average controlled-rotation fidelity of 98 per cent. These fidelities are found to be limited by the relatively long gate times used here compared with the decoherence times of the qubits. Silicon qubit designs employing fast gate operations with high Rabi frequencies16, 17, together with advanced pulsing techniques18, should therefore enable much higher fidelities in the near future.

•Jan 1, 2019•155 citations

Fast high-fidelity entangling gates for spin qubits in Si double quantum dots

F. A. Calderon-Vargas, George S. Barron, Xiu–Hao Deng +3 more

Implementing high-fidelity two-qubit gates in single-electron spin qubits in silicon double quantum dots is still a major challenge. In this work we employ analytical methods to design control pulses that generate high-fidelity entangling gates for quantum computers based on this platform. Using realistic parameters and initially assuming a noise-free environment, we present simple control pulses that generate cnot, cphase, and cz gates with average fidelities greater than 99.99% and gate times as short as 45 ns. Moreover, using the local invariants of the system's evolution operator, we show that a simple square pulse generates a cnot gate in less than 27 ns and with a fidelity greater than 99.99%. Last, we use the same analytical methods to generate two-qubit gates locally equivalent to $\sqrt{\mathrm{CNOT}}$ and $\sqrt{\mathrm{CZ}}$ that are used to implement simple two-piece pulse sequences that produce high-fidelity cnot and cz gates in the presence of low-frequency noise.

arXiv:1902.02350•Physical review. B./Physical review. B•Jul 9, 2019•32 citations
Two level quantum mechanical systems like spin 1/2 particles lend themselves as a natural qubit implementation. However, encoding a single qubit in several spins reduces the resources necessary for qubit control and can protect from decoherence channels. While several varieties of such encoded spin qubits have been implemented, accurate control remains challenging, and leakage out of the subspace of valid qubit states is a potential issue. Here, we realize high-fidelity single qubit operations for a qubit encoded in two electron spins in GaAs quantum dots by iterative tuning of the all-electrical control pulses. Using randomized benchmarking, we find an average gate fidelity of F=(98.5±0.1) %\mathcal{F} = (98.5 \pm 0.1)\,\%F=(98.5±0.1)% and determine the leakage rate between the computational subspace and other states to L=(0.4±0.1) %\mathcal{L} = (0.4\pm0.1)\,\%L=(0.4±0.1)%. These results also demonstrate that high fidelity gates can be realized even in the presence of nuclear spins as in III-V semiconductors.
A key ingredient for fault-tolerant quantum computers are sufficiently accurate logic gates on single and multiple qubits in the presence of decohering noise. In this thesis, we theoretically develop and experimentally demonstrate such high-fidelity quantum gates for semiconductor-based quantum computing. Specifically, we consider a qubit encoded in the singlet and one triplet state of two electron spins in GaAs. While its potential for optical coupling makes GaAs an attractive material, highly auto-correlated magnetic field noise from fluctuating nuclear spins leads to considerably lower coherence times than for Si-based devices, where nuclear spins can be removed by isotopic purification. In addition to noise, the control methods used in earlier experiments are based on unrealistic approximations. For these reasons, fidelities well above 99 %, as required by current quantum error correction (QEC) schemes, have not been obtained before this thesis. To tackle these issues, we extend the filter function formalism to describe quantum gates and processes in the presence of experimentally relevant non-Markovian noise. Since this formalism can consider all relevant noise sources in a computationally efficient manner, it can be used to find optimal control pulses by numerical optimization, leading to predicted single-qubit gate fidelities of 99.9 %. Furthermore, we deal with the considerable control challenges associated with this qubit type by experimental calibration of the optimized control pulses. To this end, we extend our previous experimental gate set calibration (GSC) routine to remove systematic gate errors on an arbitrary number of qubits. We apply the numerically optimized single-qubit control pulses to our GaAs sample and experimentally calibrate them with GSC. This procedure yields an average gate fidelity of 99.50 ± 0.04 % and a low leakage rate of 0.13 ± 0.03 % out of the computational subspace, characterized by randomized benchmarking. We also optimize realistic two-qubit control pulses, considering current control hardware as well as interqubit Coulomb and exchange coupling that cannot be fully turned off. Using measured noise spectra, we show that two-qubit gate fidelities of 99.90 % can be reached in GaAs, while 99.99 % can be achieved in Si. These results demonstrate that high-fidelity gates can be realized even in the presence of nuclear spins as in GaAs.
Abstract Electron spins in semiconductors are promising qubits because their long coherence times enable nearly 10 9 coherent quantum gate operations. However, developing a scalable high-fidelity two-qubit gate remains challenging. Here, we demonstrate an entangling gate between two double-quantum-dot spin qubits in GaAs by using a magnetic field gradient between the two dots in each qubit to suppress decoherence due to charge noise. When the magnetic gradient dominates the voltage-controlled exchange interaction between electrons, qubit coherence times increase by an order of magnitude. Using randomized benchmarking, we measure single-qubit gate fidelities of ~ 99%, and through self-consistent quantum measurement, state, and process tomography, we measure an entangling gate fidelity of 90%. In the future, operating double quantum dot spin qubits with large gradients in nuclear-spin-free materials, such as Si, should enable a two-qubit gate fidelity surpassing the threshold for fault-tolerant quantum information processing.
Practical Quantum computing hinges on the ability to control large numbers of qubits with high fidelity. Quantum dots define a promising platform due to their compatibility with semiconductor manufacturing. Moreover, high-fidelity operations above 99.9% have been realized with individual qubits, though their performance has been limited to 98.67% when driving two qubits simultaneously. Here we present single-qubit randomized benchmarking in a two-dimensional array of spin qubits, finding native gate fidelities as high as 99.992(1)%. Furthermore, we benchmark single qubit gate performance while simultaneously driving two and four qubits, utilizing a novel benchmarking technique called N-copy randomized benchmarking, designed for simple experimental implementation and accurate simultaneous gate fidelity estimation. We find two- and four-copy randomized benchmarking fidelities of 99.905(8)% and 99.34(4)% respectively, and that next-nearest neighbor pairs are highly robust to cross-talk errors. These characterizations of single-qubit gate quality are crucial for scaling up quantum information technology.
A two-qubit controlled-not (cnot) gate, realized by a controlled-phase (C-phase) gate combined with single-qubit gates, has been experimentally implemented recently for quantum-dot spin qubits in isotopically enriched silicon, a promising solid-state system for practical quantum computation. In the experiments, the single-qubit gates have been demonstrated with fault-tolerant control fidelity, but the infidelity of the two-qubit C-phase gate is, primarily due to the electrical noise, still higher than the required error threshold for fault-tolerant quantum computation (FTQC). Here, by taking the realistic system parameters and the experimental constraints on the control pulses into account, we construct experimentally realizable high-fidelity cnot gates robust against electrical noise with the experimentally measured 1/f1.011/{f}^{1.01}1/f1.01 noise spectrum and also against the uncertainty in the interdot tunnel coupling amplitude. Our fine-tuned optimal cnot gate has about two orders of magnitude improvement in gate infidelity over the ideal C-phase gate constructed without considering any noise effect. Furthermore, within the same control framework, high-fidelity and robust single-qubit gates can also be constructed, paving the way for large-scale FTQC.
Abstract Universal quantum computation will require qubit technology based on a scalable platform1, together with quantum error correction protocols that place strict limits on the maximum infidelities for one- and two-qubit gate operations2, 3. Although various qubit systems have shown high fidelities at the one-qubit level4–10, the only solid-state qubits manufactured using standard lithographic techniques that have demonstrated two-qubit fidelities near the fault-tolerance threshold6 have been in superconductor systems. Silicon-based quantum dot qubits are also amenable to large-scale fabrication and can achieve high single-qubit gate fidelities (exceeding 99.9 per cent) using isotopically enriched silicon11, 12. Two-qubit gates have now been demonstrated in a number of systems13–15, but as yet an accurate assessment of their fidelities using Clifford-based randomized benchmarking, which uses sequences of randomly chosen gates to measure the error, has not been achieved. Here, for qubits encoded on the electron spin states of gate-defined quantum dots, we demonstrate Bell state tomography with fidelities ranging from 80 to 89 per cent, and two-qubit randomized benchmarking with an average Clifford gate fidelity of 94.7 per cent and an average controlled-rotation fidelity of 98 per cent. These fidelities are found to be limited by the relatively long gate times used here compared with the decoherence times of the qubits. Silicon qubit designs employing fast gate operations with high Rabi frequencies16, 17, together with advanced pulsing techniques18, should therefore enable much higher fidelities in the near future.
Implementing high-fidelity two-qubit gates in single-electron spin qubits in silicon double quantum dots is still a major challenge. In this work we employ analytical methods to design control pulses that generate high-fidelity entangling gates for quantum computers based on this platform. Using realistic parameters and initially assuming a noise-free environment, we present simple control pulses that generate cnot, cphase, and cz gates with average fidelities greater than 99.99% and gate times as short as 45 ns. Moreover, using the local invariants of the system's evolution operator, we show that a simple square pulse generates a cnot gate in less than 27 ns and with a fidelity greater than 99.99%. Last, we use the same analytical methods to generate two-qubit gates locally equivalent to CNOT\sqrt{\mathrm{CNOT}}CNOT​ and CZ\sqrt{\mathrm{CZ}}CZ​ that are used to implement simple two-piece pulse sequences that produce high-fidelity cnot and cz gates in the presence of low-frequency noise.