Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1601.06460 · Applied Physics Letters

Single-ion microwave near-field quantum sensor

M. Wahnschaffe, H. Hahn, Giorgio Zarantonello, T. Dubielzig, S. Halama, A. Bautista-Salvador, M. Kohnen, C. Ospelkaus

Published Jan 16, 2017• 26 citations
arXivHTMLPDF

Abstract

We develop an intuitive model of 2D microwave near-fields in the unusual regime of centimeter waves localized to tens of microns. Close to an intensity minimum, a simple effective description emerges with five parameters that characterize the strength and spatial orientation of the zero and first order terms of the near-field, as well as the field polarization. Such a field configuration is realized in a microfabricated planar structure with an integrated microwave conductor operating near 1 GHz. We use a single 9Be+ ion as a high-resolution quantum sensor to measure the field distribution through energy shifts in its hyperfine structure. We find agreement with simulations at the sub-micron and few-degree level. Our findings give a clear and general picture of the basic properties of oscillatory 2D near-fields with applications in quantum information processing, neutral atom trapping and manipulation, chip-scale atomic clocks, and integrated microwave circuits.

DOI
10.1063/1.4974736

Related papers

Near-field microwave addressing of trapped-ion qubits for scalable quantum computation

Diana Prado Lopes Aude Craik

This thesis reports high-fidelity near-field spatial microwave addressing of long-lived 43Ca+ "atomic clock" qubits performed in a two-zone single-layer surface-electrode ion trap. Addressing is implemented by using two of the trap's integrated microwave electrodes, one in each zone, to drive single-qubit rotations in the zone we choose to address whilst interferometrically cancelling the microwave field at the neighbour (non-addressed) zone. Using this field-nulling scheme, we measure a Rabi frequency ratio between addressed and non-addressed zones of up to 1400, from which we calculate an addressing error (or a spin-flip probability on the qubit transition) of 1e-6. Off-resonant excitation out of the qubit state is a more significant source of error in this experiment, but we also demonstrate polarisation control of the microwave field at an error level of 2e-5, which, if combined with individual-ion addressing, would be sufficient to suppress off-resonant excitation errors to the 1e-9 level. Further, this thesis presents preliminary results obtained with a micron-scale coupled-microstrip differential antenna probe that can be scanned over an ion-trap chip to map microwave magnetic near fields. The probe is designed to enable the measurement of fields at tens of microns above electrode surfaces and to act as an effective characterisation tool, speeding up design-fabrication-characterisation cycles in the production of new prototype microwave ion-trap chips. Finally, a new multi-layer design for an ion-trap chip which displays, in simulations, a 100-fold improvement in addressing performance, is presented. The chip electrode structure is designed to use the cancelling effect of microwave return currents to produce Rabi frequency ratios of order 1000 between trap zones using a single microwave electrode (i.e. without the need for nulling fields). If realised, this chip could be used to drive individually addressed single-qubit operations on arrays of memory qubits in parallel and with high fidelity.

•Jan 1, 2016•1 citation

Reactive near-field subwavelength microwave imaging with a non-invasive Rydberg probe

Chaoyang Hu, Mingyong Jing, Zongkai Liu +10 more

Non-invasive microwave field imaging--accurately mapping field distributions without perturbing them--is essential in areas such as aerospace engineering, biomedical imaging and integrated-circuit diagnostics. Conventional metal probes, however, inevitably perturb reactive near fields: they act as strong scatterers that drive induced currents and secondary radiation, remap evanescent components and thereby degrade both accuracy and spatial resolution, particularly in the reactive near-field regime that is most relevant to these applications. Here we demonstrate, to our knowledge for the first time, reactive near-field subwavelength imaging of microwave fields using the quantum non-demolition properties of Rydberg atoms, realized with a compact, non-invasive single-ended fibre-integrated Rydberg probe engineered to minimize field disturbance. The probe achieves an imaging resolution of {\unboldmath$λ/56$}, and the measured field distributions agree with full-wave simulations with structural similarity approaching unity, confirming both its subwavelength spatial resolution and its genuinely non-invasive character compared with conventional metal-based probes. Because the atomic sensor is intrinsically isotropic, the same device can faithfully image multi-dimensional field structures without orientation-dependent calibration. Our results therefore establish a general, non-invasive route to high-accuracy, subwavelength reactive near-field microwave imaging, with particular promise for applications such as chip-defect detection and integrated-circuit diagnostics, where even small perturbations by the probe can mask the underlying physics of interest.

quant-pharXiv:2512.19116•Dec 23, 2025

Optimized Microwave Near-Field Control in a Planar Ion Trap

Martina Carsjens, M. Kohnen, T. Dubielzig +1 more

We describe a microfabricated planar ion trap with integrated microwave conductors. Using numerical simulations, it has been optimized for multi-qubit operations driven by microwave near-fields and represents a considerable experimental simplification.

Conference on Lasers and Electro-Optics•Jan 1, 2014•0 citations

Quantum metrology for high frequency electric fields

Bruno Eckmann, Tilman Zibold, Johannes Paul Hoffmann +1 more

Quantum systems obeying well-defined laws of physics are very attractive metrological sensors. In principle, they are intrinsically calibrated and allow direct traceability to the SI system. Several fundamental and derived units are nowadays already based on the properties of quantum systems. Neutral atoms are e.g. used for the realization of the second. Leveraging the advantageous properties of such systems to other derived units and establishing traceability still represents a significant challenge, as real-life macroscopic scales must be linked with the microscopic quantum world. In this work, we investigate the use of a vapor of neutral atoms as a highly sensitive probe for electric fields in the microwave domain. By optically exciting the atoms to high-energy states—known as Rydberg states—the atoms become extremely sensitive to electric fields due to their large electric dipole moment. Through optical readout of the atomic state, this enhanced sensitivity can be exploited to turn the atoms into precise sensors for electric fields. In contrast to classical methods of measuring electric fields using metallic probes or antennas, a dilute atomic vapor has the distinct advantage of exerting only minimal influence on the fields being measured. In this study, we aim to leverage these benefits in an experiment designed to measure microwave electric field distributions above a coplanar waveguide structure with high precision and spatial resolution. In order to translate the high accuracy of the atomic sensors to accurate measurements of electrical parameters of the coplanar structure like power, voltage standing wave ratio or S-parameters, we plan to integrate the coplanar waveguide structure into a large atomic vapor cell where it is directly surrounded by the atomic gas. In this case the fields are only minimally disturbed by the vapor cell itself and allow for simple models to translate field measurements into electrical measurements. The methods we are developing in this project are not only aiming to provide traceable measurements for high frequency electrometry but also have the potential to be extended to higher frequency in the terahertz regime or to high resolution imaging of electric field distributions.

•Jan 1, 2025•0 citations

Coherent manipulation of ultracold atoms with microwave near-fields

Pascal Böhi

The spectacular progress in the field of ultracold quantum gases is intimately connected with the availability of sophisticated techniques for quantum-level control of internal states, motional states, and collisional interactions. Atom chips provide such control in compact, robust, and scalable setups, which makes them attractive for both applications and fundamental studies. In this thesis I report on experiments that use a new method for coherent manipulation of ultracold atoms. The method is based on microwave near-fields, provided by a waveguide structure that is fully integrated on an atom chip. We generate microwave near-field potentials that combine the versatility of optical traps with the robustness and tailorability of static magnetic microtraps. These potentials depend on the internal atomic state, and we use them for state-selective splitting of Rb Bose-Einstein condensates. We show for the first time combined coherent manipulation of internal and motional states on an atom chip, realizing a trapped-atom interferometer with internal state labeling of the interferometer paths. Moreover, we use microwave near-field potentials for the preparation of spin-squeezed states for quantum-enhanced metrology through controlling state-dependent collisional interactions. In addition, very promising proposals exist for the implementation of a quantum phase gate using these potentials. Measuring microwave fields is important for engineering of microwave devices as well as in science, e.g. to characterize the field homogeneity in the interaction regions of an atomic clock. We develop a novel technique that uses clouds of uncondensed ultracold atoms as sensitive, tunable and non-invasive probes for microwave field imaging with micrometer spatial resolution. The microwave magnetic field components drive Rabi oscillations on atomic hyperfine transitions whose frequency can be tuned with a static magnetic field. Readout is accomplished using state-selective absorption imaging. Quantitative data extraction is simple and it is possible to reconstruct the amplitudes and phases of the different microwave magnetic field components. While we demonstrate 2D imaging, an extension to 3D imaging is straightforward. We use the method to determine the microwave near-field distribution around the on-chip waveguide and reconstruct the corresponding current distribution. For our experimental parameters, the method provides a microwave magnetic field sensitivity of 0.2 mG, which can even be improved further with variants discussed. The experiments presented in this thesis open the path for the realization of portable quantum-enhanced interferometer devices, the implementation of a quantum phase gate as well as for a new generation of microwave field sensors.

•Jan 1, 2010•4 citations

Two-qubit microwave quantum logic gate with 9Be+ ions in scalable surface-electrode ion traps

H. Hahn

Towards the goal of a large-scale quantum computer based on trapped ions, near-field microwaves represent a promising approach to perform the techni- cally challenging key operation of a two-qubit entangling gate. In this thesis we present the first microwave-driven two-qubit gate in 9Be+ ions employing a first-order field-independent qubit transition and a scalable surface-electrode ion trap at room temperature. We test the quality of the gate operation by producing a maximally entangled state and measuring the resulting state preparation fidelity in a reduced tomography procedure. For the best two- qubit gate achieved in the system we find this fidelity to be F = 98.2 ± 1.2 %. Following a comprehensive error analysis based on numerical simulations and experimentally determined input parameters, we identify current infidelity con- tributions of the apparatus. Here, the natural error source of the microwave near-field approach, namely fluctuating AC Zeeman shifts, could be reduced to the 10^−4 level due to the optimized design of the employed microwave con- ductor. As we find that the three largest errors can all be reduced upon purely technical improvements, higher fidelities are feasible in the future. Besides the gate realization, the thesis also comprises the initial characterization of the employed ion trap as well as the design and construction of a Raman laser at ∼ 313 nm which is utilized to perform near ground state cooling of radial modes of a single- and two-ion crystal. Here, ensuing heating rate measure- ments on a single-ion’s radial modes show good agreement with the electric- field noise spectral density expected from literature given the chosen mode frequency and nearest ion-to-electrode distance of 70 µm. Finally, we present the operation of a first multi-layer ion trap whose electrode layout features a 3-dimensional microwave conductor intended for performing microwave-driven two-qubit gates. Following a characterization of the resulting near-field pat- tern using a single ion as a local field probe, we find the multi-layer conductor to have significantly better field properties when compared to an equivalent single-layer design. Given these promising results, future work will focus on the integration of similar microwave circuitry in a multi-zone trap array as envisioned by the QCCD architecture.

•Jan 1, 2019•8 citations
We develop an intuitive model of 2D microwave near-fields in the unusual regime of centimeter waves localized to tens of microns. Close to an intensity minimum, a simple effective description emerges with five parameters that characterize the strength and spatial orientation of the zero and first order terms of the near-field, as well as the field polarization. Such a field configuration is realized in a microfabricated planar structure with an integrated microwave conductor operating near 1 GHz. We use a single 9Be+ ion as a high-resolution quantum sensor to measure the field distribution through energy shifts in its hyperfine structure. We find agreement with simulations at the sub-micron and few-degree level. Our findings give a clear and general picture of the basic properties of oscillatory 2D near-fields with applications in quantum information processing, neutral atom trapping and manipulation, chip-scale atomic clocks, and integrated microwave circuits.
This thesis reports high-fidelity near-field spatial microwave addressing of long-lived 43Ca+ "atomic clock" qubits performed in a two-zone single-layer surface-electrode ion trap. Addressing is implemented by using two of the trap's integrated microwave electrodes, one in each zone, to drive single-qubit rotations in the zone we choose to address whilst interferometrically cancelling the microwave field at the neighbour (non-addressed) zone. Using this field-nulling scheme, we measure a Rabi frequency ratio between addressed and non-addressed zones of up to 1400, from which we calculate an addressing error (or a spin-flip probability on the qubit transition) of 1e-6. Off-resonant excitation out of the qubit state is a more significant source of error in this experiment, but we also demonstrate polarisation control of the microwave field at an error level of 2e-5, which, if combined with individual-ion addressing, would be sufficient to suppress off-resonant excitation errors to the 1e-9 level. Further, this thesis presents preliminary results obtained with a micron-scale coupled-microstrip differential antenna probe that can be scanned over an ion-trap chip to map microwave magnetic near fields. The probe is designed to enable the measurement of fields at tens of microns above electrode surfaces and to act as an effective characterisation tool, speeding up design-fabrication-characterisation cycles in the production of new prototype microwave ion-trap chips. Finally, a new multi-layer design for an ion-trap chip which displays, in simulations, a 100-fold improvement in addressing performance, is presented. The chip electrode structure is designed to use the cancelling effect of microwave return currents to produce Rabi frequency ratios of order 1000 between trap zones using a single microwave electrode (i.e. without the need for nulling fields). If realised, this chip could be used to drive individually addressed single-qubit operations on arrays of memory qubits in parallel and with high fidelity.
Non-invasive microwave field imaging--accurately mapping field distributions without perturbing them--is essential in areas such as aerospace engineering, biomedical imaging and integrated-circuit diagnostics. Conventional metal probes, however, inevitably perturb reactive near fields: they act as strong scatterers that drive induced currents and secondary radiation, remap evanescent components and thereby degrade both accuracy and spatial resolution, particularly in the reactive near-field regime that is most relevant to these applications. Here we demonstrate, to our knowledge for the first time, reactive near-field subwavelength imaging of microwave fields using the quantum non-demolition properties of Rydberg atoms, realized with a compact, non-invasive single-ended fibre-integrated Rydberg probe engineered to minimize field disturbance. The probe achieves an imaging resolution of {\unboldmathλ/56λ/56λ/56}, and the measured field distributions agree with full-wave simulations with structural similarity approaching unity, confirming both its subwavelength spatial resolution and its genuinely non-invasive character compared with conventional metal-based probes. Because the atomic sensor is intrinsically isotropic, the same device can faithfully image multi-dimensional field structures without orientation-dependent calibration. Our results therefore establish a general, non-invasive route to high-accuracy, subwavelength reactive near-field microwave imaging, with particular promise for applications such as chip-defect detection and integrated-circuit diagnostics, where even small perturbations by the probe can mask the underlying physics of interest.
Quantum systems obeying well-defined laws of physics are very attractive metrological sensors. In principle, they are intrinsically calibrated and allow direct traceability to the SI system. Several fundamental and derived units are nowadays already based on the properties of quantum systems. Neutral atoms are e.g. used for the realization of the second. Leveraging the advantageous properties of such systems to other derived units and establishing traceability still represents a significant challenge, as real-life macroscopic scales must be linked with the microscopic quantum world. In this work, we investigate the use of a vapor of neutral atoms as a highly sensitive probe for electric fields in the microwave domain. By optically exciting the atoms to high-energy states—known as Rydberg states—the atoms become extremely sensitive to electric fields due to their large electric dipole moment. Through optical readout of the atomic state, this enhanced sensitivity can be exploited to turn the atoms into precise sensors for electric fields. In contrast to classical methods of measuring electric fields using metallic probes or antennas, a dilute atomic vapor has the distinct advantage of exerting only minimal influence on the fields being measured. In this study, we aim to leverage these benefits in an experiment designed to measure microwave electric field distributions above a coplanar waveguide structure with high precision and spatial resolution. In order to translate the high accuracy of the atomic sensors to accurate measurements of electrical parameters of the coplanar structure like power, voltage standing wave ratio or S-parameters, we plan to integrate the coplanar waveguide structure into a large atomic vapor cell where it is directly surrounded by the atomic gas. In this case the fields are only minimally disturbed by the vapor cell itself and allow for simple models to translate field measurements into electrical measurements. The methods we are developing in this project are not only aiming to provide traceable measurements for high frequency electrometry but also have the potential to be extended to higher frequency in the terahertz regime or to high resolution imaging of electric field distributions.
The spectacular progress in the field of ultracold quantum gases is intimately connected with the availability of sophisticated techniques for quantum-level control of internal states, motional states, and collisional interactions. Atom chips provide such control in compact, robust, and scalable setups, which makes them attractive for both applications and fundamental studies. In this thesis I report on experiments that use a new method for coherent manipulation of ultracold atoms. The method is based on microwave near-fields, provided by a waveguide structure that is fully integrated on an atom chip. We generate microwave near-field potentials that combine the versatility of optical traps with the robustness and tailorability of static magnetic microtraps. These potentials depend on the internal atomic state, and we use them for state-selective splitting of Rb Bose-Einstein condensates. We show for the first time combined coherent manipulation of internal and motional states on an atom chip, realizing a trapped-atom interferometer with internal state labeling of the interferometer paths. Moreover, we use microwave near-field potentials for the preparation of spin-squeezed states for quantum-enhanced metrology through controlling state-dependent collisional interactions. In addition, very promising proposals exist for the implementation of a quantum phase gate using these potentials. Measuring microwave fields is important for engineering of microwave devices as well as in science, e.g. to characterize the field homogeneity in the interaction regions of an atomic clock. We develop a novel technique that uses clouds of uncondensed ultracold atoms as sensitive, tunable and non-invasive probes for microwave field imaging with micrometer spatial resolution. The microwave magnetic field components drive Rabi oscillations on atomic hyperfine transitions whose frequency can be tuned with a static magnetic field. Readout is accomplished using state-selective absorption imaging. Quantitative data extraction is simple and it is possible to reconstruct the amplitudes and phases of the different microwave magnetic field components. While we demonstrate 2D imaging, an extension to 3D imaging is straightforward. We use the method to determine the microwave near-field distribution around the on-chip waveguide and reconstruct the corresponding current distribution. For our experimental parameters, the method provides a microwave magnetic field sensitivity of 0.2 mG, which can even be improved further with variants discussed. The experiments presented in this thesis open the path for the realization of portable quantum-enhanced interferometer devices, the implementation of a quantum phase gate as well as for a new generation of microwave field sensors.
Towards the goal of a large-scale quantum computer based on trapped ions, near-field microwaves represent a promising approach to perform the techni- cally challenging key operation of a two-qubit entangling gate. In this thesis we present the first microwave-driven two-qubit gate in 9Be+ ions employing a first-order field-independent qubit transition and a scalable surface-electrode ion trap at room temperature. We test the quality of the gate operation by producing a maximally entangled state and measuring the resulting state preparation fidelity in a reduced tomography procedure. For the best two- qubit gate achieved in the system we find this fidelity to be F = 98.2 ± 1.2 %. Following a comprehensive error analysis based on numerical simulations and experimentally determined input parameters, we identify current infidelity con- tributions of the apparatus. Here, the natural error source of the microwave near-field approach, namely fluctuating AC Zeeman shifts, could be reduced to the 10^−4 level due to the optimized design of the employed microwave con- ductor. As we find that the three largest errors can all be reduced upon purely technical improvements, higher fidelities are feasible in the future. Besides the gate realization, the thesis also comprises the initial characterization of the employed ion trap as well as the design and construction of a Raman laser at ∼ 313 nm which is utilized to perform near ground state cooling of radial modes of a single- and two-ion crystal. Here, ensuing heating rate measure- ments on a single-ion’s radial modes show good agreement with the electric- field noise spectral density expected from literature given the chosen mode frequency and nearest ion-to-electrode distance of 70 µm. Finally, we present the operation of a first multi-layer ion trap whose electrode layout features a 3-dimensional microwave conductor intended for performing microwave-driven two-qubit gates. Following a characterization of the resulting near-field pat- tern using a single ion as a local field probe, we find the multi-layer conductor to have significantly better field properties when compared to an equivalent single-layer design. Given these promising results, future work will focus on the integration of similar microwave circuitry in a multi-zone trap array as envisioned by the QCCD architecture.