Measuring the thermodynamic properties of open quantum systems poses a major challenge. A calorimetric detection has been proposed as a feasible experimental scheme to measure work and fluctuation relations in open quantum systems. However, the detection requires a finite size for the environment, which influences the system dynamics. This process cannot be modeled with the standard stochastic approaches. We develop a quantum jump model suitable for systems coupled to a finite-size environment. We use the method to study the common fluctuation relations and prove that they are satisfied.
Measuring the thermodynamic properties of open quantum systems poses a major challenge. A calorimetric detection has been proposed as a feasible experimental scheme to measure work and fluctuation relations in open quantum systems. However, the detection requires a finite size for the environment, which influences the system dynamics. This process cannot be modeled with the standard stochastic approaches. We develop a quantum jump model suitable for systems coupled to a finite-size environment. We use the method to study the common fluctuation relations and prove that they are satisfied.
Rapid progress in the fabrication and manipulation of micro and nanoscale devices has made it necessary to extend the concepts of thermodynamics to small systems and finally to quantum systems. In such systems the extensive thermodynamic quantities, such as entropy, heat, and work, are not described by their average values alone but by distributions. \n \nRemarkably, it has been shown that the stochastic thermodynamic variables often obey fluctuation relations which usually appear in the form of relations between exponential averages. While the two-measurement protocol of thermodynamic variables, especially work, is now well studied in closed quantum systems, there have been conceptual and experimental problems in open quantum systems. \n \nIn this thesis, we theoretically study work statistics and fluctuation relations in open quantum systems. To calculate the work statistics, we use the quantum jump method and direct master equation calculations. We show that work definitions equivalent in closed systems can lead to mutually different results in the case of open quantum systems due to a different order of approximations. Moreover, we show that the fluctuation relations can be extended to nearly adiabatically driven systems by using the adiabatic renormalization procedure. \n \nLast, we focus on how a finite size of the environment affects the dynamics and work statistics of open quantum systems. This is important from the experimental point of view because a finite-size environment allows the detection of heat exchange between the system and the environment. We derive a master equation that takes into account these effects and develop a stochastic model that unravels the master equation. We explicitly show that the finite size of the environment influences the dynamics and the work statistics. We also show that the common fluctuation relations are still valid.
We investigate the experimental setup proposed in New J. Phys. 15, 115006 (2013) for calorimetric measurements of thermodynamic indicators in an open quantum system. As a theoretical model we consider a periodically driven qubit coupled with a large yet finite electron reservoir, the calorimeter. The calorimeter is initially at equilibrium with an infinite phonon bath. As time elapses, the temperature of the calorimeter varies in consequence of energy exchanges with the qubit and the phonon bath. We show how under weak-coupling assumptions, the evolution of the qubit-calorimeter system can be described by a generalized quantum jump process including as dynamical variable the temperature of the calorimeter. We study the jump process by numeric and analytic methods. Asymptotically with the duration of the drive, the qubit-calorimeter attains a steady state. In this same limit, we use multiscale perturbation theory to derive a Fokker-Planck equation governing the calorimeter temperature distribution. We inquire the properties of the temperature probability distribution close and at the steady state. In particular, we predict the behavior of measurable statistical indicators versus the qubit-calorimeter coupling constant.
Technological advances over the past few decades have made it possible to address quantum systems down to individual quanta of energy. Artificial atoms are now routinely fabricated and manipulated using solid-state technology. Exciting new applications are now within grasp, such as quantum heat engines, which have been theorised to achieve energy efficiencies not possible for their classical counterparts. Energy fluctuations are an inherent part of these devices and a detailed understanding of them is required. However, the proper theoretical framework under which such fluctuations are to be understood is still debated. In this thesis, we study energy fluctuations in open quantum systems at the level of individual runs of an experimental protocol. This work has been carried out in two parts. In the first part, we focus on calorimetric measurements – a promising new experimental protocol to continuously measure energy fluctuations of a qubit interacting with a thermal environment. Applying the protocol to more complex systems is not straightforward. Using a simple two-level approximation, we show that for some experimental parameters this protocol can be extended to a driven harmonic oscillator. Another aspect of the calorimetric protocol is that it can induce non-Markovian effects which affect how work and heat are defined. We quantify the degree of non-Markovianity induced by this measurement protocol, when applied to a qubit, based on a previously developed theoretical model. Importantly, we show that non-Markovianity does not necessarily decrease monotonically with the environment size. The attempt to extend the calorimetric protocol to general systems has led to the second part of this thesis. The calorimetric detection is a particular case of a continuously monitored system. However, other schemes exist that lead to different definitions of work and heat. Reconciling these approaches is not straightforward, as evidenced by the many work definitions present in the literature. The difficulty is centred at the fact that, in the orthodox interpretation of quantum mechanics, energy is not always a well-defined quantity. Here, based on the Bohmian interpretation of quantum mechanics, we put forward a general framework to remove this problem in a clear conceptual manner. In particular, we show that the classical definition of work for closed systems can be straightforwardly generalised to the quantum case. For an open system, we used the Bohmian conditional wave function which provides a stochastic state evolution for the open system. We show that this approach can lead to new insights regarding the role of entanglement in energy fluctuations and has the potential to provide a general and observer-independent framework of energy fluctuations in open quantum systems. The results presented in this thesis give a small contribution to the developing field of quantum thermodynamics.
The large-deviation method can be used to study the measurement trajectories of open quantum systems. For optical arrangements this formalism allows to describe the long time properties of the (nonequilibrium) photon counting statistics in the context of a (equilibrium) thermodynamic approach defined in terms of dynamical phases and transitions between them in the trajectory space [J. P. Garrahan and I. Lesanovsky, Phys. Rev. Lett. 104, 160601 (2010)]. In this paper, we study the thermodynamic approach for fluorescent systems coupled to complex reservoirs that induce stochastic fluctuations in their dynamical parameters. In a fast modulation limit the thermodynamics corresponds to that of a Markovian two-level system. In a slow modulation limit, the thermodynamic properties are equivalent to those of a finite system that in an infinite-size limit is characterized by a first-order transition. The dynamical phases correspond to different intensity regimes, while the size of the system is measured by the transition rate of the bath fluctuations. As a function of a dimensionless intensive variable, the first and second derivatives of the thermodynamic potential develop an abrupt change and a narrow peak, respectively. Their scaling properties are consistent with a double-Gaussian probability distribution of the associated extensive variable.
Recent developments in experimental methods allow for the study of thermodynamic properties of quantum systems. In quantum integrated circuits, quantum systems are elements in an electric circuit that can straightforwardly be coupled to other elements. This manipulability allows one to construct quantum heat engines, Maxwell demons etc. Quantum integrated circuits also are one of the main potential settings to realise a working quantum computer. Calorimetric measurements in integrated circuits serve as a promising technique to probe thermodynamic laws of the quantum regime and to study the inner workings of quantum devices. Due to this experimental accessibility, the theoretical study of open quantum systems in the context of quantum integrated circuits is highly relevant. Open quantum systems are typically small systems, e.g. qubits or oscillators, in contact with one or more reservoirs. The research on which this thesis is based can roughly be divided into two parts. The first part is concerned with the thermodynamics of a driven qubit in contact with a thermal bath. This system is the archetype of a quantum out-ofequilibrium system. In one case the qubit is strongly driven by a semiclassical driving field. Building on earlier works, the thermodynamic relations of the system are found by proving the equivalence with an easier to study qubit-oscillator system. In the other, case the qubit is driven by being in contact with two baths with a temperature gradient. The full generating function is derived in a proper approximative scheme and a fluctuation-dissipation relation is found. The second part focusses on a specific experimental scheme to perform calorimetric measurements. The scheme relies on coupling a quantum system to a finite reservoir and performing fast temperature measurements on the reservoir. Doing so allows one to infer energy changes in the reservoir and therefore to obtain the heat exchanged with the system. The dynamics of this system are modelled for weak system-reservoir coupling and concrete experimental predictions are made. In new work, the dynamics for a toy model of a system interacting with a finite reservoir are derived from first principles for a specific model. The first principle derivation matches with the earlier modelled dynamics in the weak coupling and allows to consider strong system-reservoir coupling as well.