Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1512.03128 · IEEE International Conference on Acoustics Speech and Signal Processing

Partitioned successive-cancellation list decoding of polar codes

Seyyed Ali Hashemi, Alexios Balatsoukas‐Stimming, Pascal Giard, Claude Thibeault, Warren J. Gross

Published Mar 1, 2016• 48 citations
arXivHTMLPDF

Abstract

Successive-cancellation list (SCL) decoding is an algorithm that provides very good error-correction performance for polar codes. However, its hardware implementation requires a large amount of memory, mainly to store intermediate results. In this paper, a partitioned SCL algorithm is proposed to reduce the large memory requirements of the conventional SCL algorithm. The decoder tree is broken into partitions that are decoded separately. We show that with careful selection of list sizes and number of partitions, the proposed algorithm can outperform conventional SCL while requiring less memory.

DOI
10.1109/icassp.2016.7471817

Related papers

Simplified Successive-Cancellation List decoding of polar codes

Seyyed Ali Hashemi, Carlo Condo, Warren J. Gross

The Successive-Cancellation List (SCL) decoding algorithm is one of the most promising approaches towards practical polar code decoding. It is able to provide a good trade-off between error-correction performance and complexity, tunable through the size of the list. In this paper, we show that in the conventional formulation of SCL, there are redundant calculations which do not need to be performed in the course of the algorithm. We simplify SCL by removing these redundant calculations and prove that the proposed simplified SCL and the conventional SCL algorithms are equivalent. The simplified SCL algorithm is valid for any code and can reduce the time-complexity of SCL without affecting the space complexity.

IEEE International Symposium on Information Theory (ISIT)•Jul 1, 2016•72 citations

Fast Simplified Successive-Cancellation List Decoding of Polar Codes

Seyyed Ali Hashemi, Carlo Condo, Warren J. Gross

Polar codes are capacity achieving error correcting codes that can be decoded through the successive-cancellation algorithm. To improve its error-correction performance, a list-based version called successive-cancellation list (SCL) has been proposed in the past, that however substantially increases the number of time-steps in the decoding process. The simplified SCL (SSCL) decoding algorithm exploits constituent codes within the polar code structure to greatly reduce the required number of time-steps without introducing any error-correction performance loss. In this paper, we propose a faster decoding approach to decode one of these constituent codes, the Rate-1 node. We use this Rate-1 node decoder to develop Fast-SSCL. We demonstrate that only a list-size-bound number of bits needs to be estimated in Rate-1 nodes and Fast-SSCL exactly matches the error-correction performance of SCL and SSCL. This technique can potentially greatly reduce the total number of time-steps needed for polar codes decoding: analysis on a set of case studies show that Fast-SSCL has a number of time-steps requirement that is up to 66.6% lower than SSCL and 88.1% lower than SCL.

arXiv:1701.08126•Jan 27, 2017•4 citations

Fast Simplified Successive-Cancellation List Decoding of Polar Codes

Seyyed Ali Hashemi, Carlo Condo, Warren J. Gross

Polar codes are capacity achieving error correcting codes that can be decoded through the successive-cancellation algorithm. To improve its error-correction performance, a list-based version called successive-cancellation list (SCL) has been proposed in the past, that however substantially increases the number of time-steps in the decoding process. The simplified SCL (SSCL) decoding algorithm exploits constituent codes within the polar code structure to greatly reduce the required number of time-steps without introducing any error-correction performance loss. In this paper, we propose a faster decoding approach to decode one of these constituent codes, the Rate-1 node. We use this Rate-1 node decoder to develop Fast-SSCL. We demonstrate that only a list-size-bound number of bits needs to be estimated in Rate-1 nodes and Fast-SSCL exactly matches the error-correction performance of SCL and SSCL. This technique can potentially greatly reduce the total number of time-steps needed for polar codes decoding: analysis on a set of case studies show that Fast-SSCL has a number of time- steps requirement that is up to 66.6% lower than SSCL and 88.1% lower than SCL.

IEEE Wireless Communications and Networking Conference Workshops (WCNCW)•Mar 1, 2017•86 citations

An Improved Simplified Successive-Cancellation List Decoding of Polar Codes

Yu Guo, Shufeng Li, Mingyu Cai

The Successive-Cancellation List (SCL) algorithm is a popular decoding algorithm for polar codes. Although SCL algorithm overcomes the error propagation problem in polar codes decoding, the improvement of error correction performance needs to pay the price of high latency. To solve this problem, a simplified SCL (SSCL) algorithm is proposed. For some special nodes, the SSCL algorithm can calculate path metric (PM) without traversing the decoding tree to achieve direct decoding, reducing the latency and complexity of decoding. In this paper, a new special node has been discovered, it is also possible to calculate PM without traversing decoding tree. Based on this, we propose an improved SSCL algorithm. Simulation results show that improved SSCL algorithm can further reduce the decoding latency and the loss of error-correction performance is negligible.

IEEE International Conference on Computer and Communication Engineering Technology (CCET)•Aug 19, 2022•1 citation

Interleaver-Aided Successive Cancellation Flip Decoding Algorithm for Polar Codes

Haseong Kim, Hyunjee Lee, Hosung Park

When the code length is finite, the successive cancellation list (SCL) decoding of polar codes shows as good error-correction performance as low-density parity-check codes and turbo codes and it will be used in high-speed communications. However, since the hardware complexity of the SCL increases linearly as the size of the list increases, it is difficult to use the high-complexity SCL decoding for devices with limited resource such as IoT devices. The successive cancellation flip (SCF) decoding algorithm has been proposed to solve the problem of high hardware complexity and to enhance the error-correction performance of successive cancellation decoding. However, the conventional SCF decoding has high computational complexity. In this paper, we propose the interleaver-aided successive cancellation flip (ISCF) decoding to reduce the computational complexity. The computational complexity of the ISCF decoding is less by at least 32% than the conventional SCF decoding for error frame at Eb/N0=3.5dB.

IEEE International Conference on Computer and Communications (ICCC)•Dec 1, 2018•1 citation

Low-Complexity PSCL Decoding of Polar Codes

Xinyuanmeng Yao, Xiao Ma

Successive cancellation list (SCL) decoding enables polar codes and their generalizations to deliver satisfactory performance in finite-length scenarios but it comes with high latency and complexity. To reduce latency, a partitioned SCL (PSCL) decoding algorithm, implemented over a PSCL decoding tree, can be utilized. In this work, we aim to lower down the complexity of the PSCL decoding, resulting in an efficient decoding algorithm with low latency and complexity for polar-like codes. To achieve this, we define two metrics at each level of the PSCL decoding tree. One is for evaluating the reliability of a path and the other is for estimating the probability of the correct path being included in a list of paths. Then, we propose a double-threshold strategy in the PSCL decoding process where unreliable valid paths are pruned based on the first metric, and then a list of surviving paths is selected based on the second metric. Simulation results demonstrate that when polar/CRC-polar/PAC codes are decoded using the proposed low-complexity PSCL decoder, both the sorting complexity and the computational complexity are reduced and significantly decrease as the signal-to-noise ratio (SNR) increases.

arXiv:2405.13255•May 21, 2024•0 citations
Successive-cancellation list (SCL) decoding is an algorithm that provides very good error-correction performance for polar codes. However, its hardware implementation requires a large amount of memory, mainly to store intermediate results. In this paper, a partitioned SCL algorithm is proposed to reduce the large memory requirements of the conventional SCL algorithm. The decoder tree is broken into partitions that are decoded separately. We show that with careful selection of list sizes and number of partitions, the proposed algorithm can outperform conventional SCL while requiring less memory.
The Successive-Cancellation List (SCL) decoding algorithm is one of the most promising approaches towards practical polar code decoding. It is able to provide a good trade-off between error-correction performance and complexity, tunable through the size of the list. In this paper, we show that in the conventional formulation of SCL, there are redundant calculations which do not need to be performed in the course of the algorithm. We simplify SCL by removing these redundant calculations and prove that the proposed simplified SCL and the conventional SCL algorithms are equivalent. The simplified SCL algorithm is valid for any code and can reduce the time-complexity of SCL without affecting the space complexity.
Polar codes are capacity achieving error correcting codes that can be decoded through the successive-cancellation algorithm. To improve its error-correction performance, a list-based version called successive-cancellation list (SCL) has been proposed in the past, that however substantially increases the number of time-steps in the decoding process. The simplified SCL (SSCL) decoding algorithm exploits constituent codes within the polar code structure to greatly reduce the required number of time-steps without introducing any error-correction performance loss. In this paper, we propose a faster decoding approach to decode one of these constituent codes, the Rate-1 node. We use this Rate-1 node decoder to develop Fast-SSCL. We demonstrate that only a list-size-bound number of bits needs to be estimated in Rate-1 nodes and Fast-SSCL exactly matches the error-correction performance of SCL and SSCL. This technique can potentially greatly reduce the total number of time-steps needed for polar codes decoding: analysis on a set of case studies show that Fast-SSCL has a number of time-steps requirement that is up to 66.6% lower than SSCL and 88.1% lower than SCL.
Polar codes are capacity achieving error correcting codes that can be decoded through the successive-cancellation algorithm. To improve its error-correction performance, a list-based version called successive-cancellation list (SCL) has been proposed in the past, that however substantially increases the number of time-steps in the decoding process. The simplified SCL (SSCL) decoding algorithm exploits constituent codes within the polar code structure to greatly reduce the required number of time-steps without introducing any error-correction performance loss. In this paper, we propose a faster decoding approach to decode one of these constituent codes, the Rate-1 node. We use this Rate-1 node decoder to develop Fast-SSCL. We demonstrate that only a list-size-bound number of bits needs to be estimated in Rate-1 nodes and Fast-SSCL exactly matches the error-correction performance of SCL and SSCL. This technique can potentially greatly reduce the total number of time-steps needed for polar codes decoding: analysis on a set of case studies show that Fast-SSCL has a number of time- steps requirement that is up to 66.6% lower than SSCL and 88.1% lower than SCL.
The Successive-Cancellation List (SCL) algorithm is a popular decoding algorithm for polar codes. Although SCL algorithm overcomes the error propagation problem in polar codes decoding, the improvement of error correction performance needs to pay the price of high latency. To solve this problem, a simplified SCL (SSCL) algorithm is proposed. For some special nodes, the SSCL algorithm can calculate path metric (PM) without traversing the decoding tree to achieve direct decoding, reducing the latency and complexity of decoding. In this paper, a new special node has been discovered, it is also possible to calculate PM without traversing decoding tree. Based on this, we propose an improved SSCL algorithm. Simulation results show that improved SSCL algorithm can further reduce the decoding latency and the loss of error-correction performance is negligible.
When the code length is finite, the successive cancellation list (SCL) decoding of polar codes shows as good error-correction performance as low-density parity-check codes and turbo codes and it will be used in high-speed communications. However, since the hardware complexity of the SCL increases linearly as the size of the list increases, it is difficult to use the high-complexity SCL decoding for devices with limited resource such as IoT devices. The successive cancellation flip (SCF) decoding algorithm has been proposed to solve the problem of high hardware complexity and to enhance the error-correction performance of successive cancellation decoding. However, the conventional SCF decoding has high computational complexity. In this paper, we propose the interleaver-aided successive cancellation flip (ISCF) decoding to reduce the computational complexity. The computational complexity of the ISCF decoding is less by at least 32% than the conventional SCF decoding for error frame at Eb/N0=3.5dB.
Successive cancellation list (SCL) decoding enables polar codes and their generalizations to deliver satisfactory performance in finite-length scenarios but it comes with high latency and complexity. To reduce latency, a partitioned SCL (PSCL) decoding algorithm, implemented over a PSCL decoding tree, can be utilized. In this work, we aim to lower down the complexity of the PSCL decoding, resulting in an efficient decoding algorithm with low latency and complexity for polar-like codes. To achieve this, we define two metrics at each level of the PSCL decoding tree. One is for evaluating the reliability of a path and the other is for estimating the probability of the correct path being included in a list of paths. Then, we propose a double-threshold strategy in the PSCL decoding process where unreliable valid paths are pruned based on the first metric, and then a list of surviving paths is selected based on the second metric. Simulation results demonstrate that when polar/CRC-polar/PAC codes are decoded using the proposed low-complexity PSCL decoder, both the sorting complexity and the computational complexity are reduced and significantly decrease as the signal-to-noise ratio (SNR) increases.