Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1508.04086 · Review of Scientific Instruments

Transparent electrodes for high E-field production using a buried indium tin oxide layer

Will Gunton, Gene Polovy, Mariusz Semczuk, Kirk W. Madison

Published Mar 1, 2016• 4 citations
arXivHTMLPDF

Abstract

We present a design and characterization of optically transparent electrodes suitable for atomic and molecular physics experiments where high optical access is required. The electrodes can be operated in air at standard atmospheric pressure and do not suffer electrical breakdown even for electric fields far exceeding the dielectric breakdown of air. This is achieved by putting an indium tin oxide coated dielectric substrate inside a stack of dielectric substrates, which prevents ion avalanche resulting from Townsend discharge. With this design, we observe no arcing for fields of up to 120 kV/cm. Using these plates, we directly verify the production of electric fields up to 18 kV/cm inside a quartz vacuum cell by a spectroscopic measurement of the dc Stark shift of the 5(2)S(1/2) → 5(2)P(3/2) transition for a cloud of laser cooled rubidium atoms. We also report on the shielding of the electric field and on the residual electric fields that persist within the vacuum cell once the electrodes are discharged. In addition, we discuss observed atom loss that results from the motion of free charges within the vacuum. The observed asymmetry of these phenomena on the bias of the electrodes suggests that field emission of electrons within the vacuum is primarily responsible for these effects and may indicate a way of mitigating them.

DOI
10.1063/1.4944411

Related papers

Versatile electric fields for the manipulation of ultracold NaK molecules

Matthias W. Gempel, Torsten Hartmann, Torben Schulze +3 more

In this paper, we present an electrode geometry for the manipulation of ultracold, rovibrational ground state NaK molecules. The electrode system allows to induce a dipole moment in trapped diatomic NaK molecules with a magnitude up to 68% of their internal dipole moment along any direction in a given two-dimensional plane. The strength, the sign and the direction of the induced dipole moment is therefore fully tunable. The maximal relative variation of the electric field over the trapping volume is below 10 −6 . At the desired electric field value of 10 kV cm −1 this corresponds to a deviation of 0.01 V cm −1 . Furthermore, the possibility to create strong electric field gradients provides the opportunity to address molecules in single layers of an optical lattice. The electrode structure is made of transparent indium tin oxide and combines large optical access for sophisticated optical dipole traps and optical lattice configurations with the possibility to create versatile electric field configurations.

arXiv:1603.08348•New Journal of Physics•Apr 20, 2016•12 citations

Measurement of dc and ac Electric Fields inside an Atomic Vapor Cell with Wall-Integrated Electrodes

Lu Ma, Michael A. Viray, David Alexander Anderson +1 more

We present and characterize a Rb atomic vapor cell with silicon-ring electrodes embedded between borosilicate glass tubes. The ring electrodes can be externally connectorized for application of electric fields to the inside of the cell. An atom-based, all-optical, laser-spectroscopic field-sensing method is employed to measure electric fields in the cell. Here, the Stark effect of electric-field-sensitive rubidium Rydberg atoms is exploited to measure dc electric fields in the cell of approximately $5$ V/cm, with a relative uncertainty of 10%. Measurement results are compared with dc field calculations, allowing us to quantify electric field attenuation due to free surface charges inside the cell. We further measure the propagation of microwave fields into the cell, using Autler-Townes splitting of Rydberg levels as a field probe. Results are obtained for a range of microwave powers and polarization angles relative to the cell's ring electrodes. We compare the results with microwave-field calculations.

arXiv:2106.01968•Physical Review Applied•Aug 1, 2022•32 citations

DC electric fields in electrode-free glass vapor cell by photoillumination

L. Ma, E. Paradis, Georg A. Raithel

We demonstrate laser induced DC electric fields in an all-glass vapor cell without bulk or thin film electrodes. The spatial field distribution is mapped by Rydberg electromagnetically induced transparency (EIT) spectroscopy. The fields are generated by a photoelectric effect and allow DC electric field tuning of up to 0.8 V/cm within the Rydberg EIT probe region. We explain the measured with a boundary-value electrostatic model. This work may inspire new approaches for DC electric field control in designing miniaturized atomic vapor cell devices. Limitations and other charge effects are also discussed.

arXiv:1909.05793•Optics Express•Jan 7, 2020•39 citations

Study on electric field shielding in SiO2 and CaF2 vapor cell for Rydberg atom electric field sensors

Kai Ma, Dongping Xiao, Huaiqing Zhang +2 more

Abstract The measurement of Rydberg atoms in low-frequency electric fields is hindered due to the shielding effect of the vapor cell against low-frequency electric fields. This study analyzes the electric field shielding effect of Vapor Cell in Rydberg atom electric field sensors, which arises primarily from the polarization charges generated in dielectric materials under electric field influence, as well as the reduced surface resistivity caused by the adsorption of alkali metal atoms on the inner surfaces of the vapor cell. To investigate the electric field shielding resulting from the dielectric materials, we utilized finite element simulation software for analysis and normalized the influencing factors. For the shielding associated with reduced surface resistivity, we measured the electric field transmission coefficients of SiO2 in the 0–60 MHz range using the Stark effect of Rydberg atoms. Additionally, we combined finite element simulations with molecular dynamics analysis software to quantitatively and qualitatively assess the properties of the SiO2 surface after cesium atom adsorption. Building on this foundation, we conducted a simulation analysis of vapor cell made from CaF2. Our results indicate that after cesium atom adsorption, CaF2 retains excellent insulating properties, with a surface resistivity exceeding 1 × 1012 Ω/sq, making it suitable for electric field measurements in the tens of Hz range. Furthermore, we examined the influence of laser transmittance in Vapor Cell on the peak of electromagnetically induced transparency. We measured the laser transmittance of SiO2 and Al2O3 vapor cells and compared these values to the calculated laser transmittance of CaF2. The results revealed that CaF2 exhibits slightly higher laser transmittance than SiO2, demonstrating favorable optical characteristics for use in optical systems. In summary, this research provides significant theoretical insights and experimental support for enhancing the performance of Rydberg atom electric field sensors.

Journal of Physics D Applied Physics•Jan 30, 2025•3 citations

Photo-ionization Compensation of Stray Electric Fields for Cold Rydberg Atoms

Z Y Chen, Z. -X. Fu, Z. -R He +6 more

Neurtal atoms in optical tweezer arrays constitute a highly promising platform for quantum computing and quantum simulation. Their operation relies on precise control of the Rydberg excitation, which is highly sensitive to background electric fields. Here, we identify a previously overlooked source of stray electric fields arising from trapped charges within the antireflection coating layers of glass vacuum cells. In contrast to the conventional approach of removing surface charges through ultraviolet-light-induced desorption, we compensate these clamped charges by generating additional charges via photo-ionization of a cold atomic ensemble. We verify the resulting suppression of stray electric fields through Rydberg excitation spectroscopy in an atomic array and further confirm that the residual electric field inside the vacuum cell is effectively eradicated with the aid of external electrodes. Our work identifies and mitigates a previously unrecognized source of residual electric field, providing a practical solution for improving the performance of neutral atomic quantum processors and other Rydberg-based quantum technologies, as well as surface-sensitive atomic systems.

arXiv:2608.04660•Aug 5, 2026•1 citation

Electric field control for experiments with atoms in Rydberg states

Aishik Panja, Yupeng Wang, Xinghan Wang +3 more

Atoms excited to Rydberg states have recently emerged as a valuable resource in neutral atom platforms for quantum computation, quantum simulation, and quantum information processing. Atoms in Rydberg states have large polarizabilities, which makes them highly sensitive to electric fields. Therefore, stray electric fields can decohere these atoms, in addition to compromising the fidelity of engineered interactions between them. Therefore, it is essential to cancel these stray electric fields. Here, we present a novel, simple, and highly compact electrode assembly, implemented in a glass cell-based vacuum chamber design, for stray electric field cancellation. The electrode assembly allows for full 3D control of the electric field in the vicinity of the atoms while blocking almost no optical access. We experimentally demonstrate the cancellation of stray electric fields to better than 10 mV/cm using this electrode assembly.

arXiv:2409.11865•AIP Advances•Dec 1, 2024•5 citations
We present a design and characterization of optically transparent electrodes suitable for atomic and molecular physics experiments where high optical access is required. The electrodes can be operated in air at standard atmospheric pressure and do not suffer electrical breakdown even for electric fields far exceeding the dielectric breakdown of air. This is achieved by putting an indium tin oxide coated dielectric substrate inside a stack of dielectric substrates, which prevents ion avalanche resulting from Townsend discharge. With this design, we observe no arcing for fields of up to 120 kV/cm. Using these plates, we directly verify the production of electric fields up to 18 kV/cm inside a quartz vacuum cell by a spectroscopic measurement of the dc Stark shift of the 5(2)S(1/2) → 5(2)P(3/2) transition for a cloud of laser cooled rubidium atoms. We also report on the shielding of the electric field and on the residual electric fields that persist within the vacuum cell once the electrodes are discharged. In addition, we discuss observed atom loss that results from the motion of free charges within the vacuum. The observed asymmetry of these phenomena on the bias of the electrodes suggests that field emission of electrons within the vacuum is primarily responsible for these effects and may indicate a way of mitigating them.
In this paper, we present an electrode geometry for the manipulation of ultracold, rovibrational ground state NaK molecules. The electrode system allows to induce a dipole moment in trapped diatomic NaK molecules with a magnitude up to 68% of their internal dipole moment along any direction in a given two-dimensional plane. The strength, the sign and the direction of the induced dipole moment is therefore fully tunable. The maximal relative variation of the electric field over the trapping volume is below 10 −6 . At the desired electric field value of 10 kV cm −1 this corresponds to a deviation of 0.01 V cm −1 . Furthermore, the possibility to create strong electric field gradients provides the opportunity to address molecules in single layers of an optical lattice. The electrode structure is made of transparent indium tin oxide and combines large optical access for sophisticated optical dipole traps and optical lattice configurations with the possibility to create versatile electric field configurations.
We present and characterize a Rb atomic vapor cell with silicon-ring electrodes embedded between borosilicate glass tubes. The ring electrodes can be externally connectorized for application of electric fields to the inside of the cell. An atom-based, all-optical, laser-spectroscopic field-sensing method is employed to measure electric fields in the cell. Here, the Stark effect of electric-field-sensitive rubidium Rydberg atoms is exploited to measure dc electric fields in the cell of approximately 555 V/cm, with a relative uncertainty of 10%. Measurement results are compared with dc field calculations, allowing us to quantify electric field attenuation due to free surface charges inside the cell. We further measure the propagation of microwave fields into the cell, using Autler-Townes splitting of Rydberg levels as a field probe. Results are obtained for a range of microwave powers and polarization angles relative to the cell's ring electrodes. We compare the results with microwave-field calculations.
We demonstrate laser induced DC electric fields in an all-glass vapor cell without bulk or thin film electrodes. The spatial field distribution is mapped by Rydberg electromagnetically induced transparency (EIT) spectroscopy. The fields are generated by a photoelectric effect and allow DC electric field tuning of up to 0.8 V/cm within the Rydberg EIT probe region. We explain the measured with a boundary-value electrostatic model. This work may inspire new approaches for DC electric field control in designing miniaturized atomic vapor cell devices. Limitations and other charge effects are also discussed.
Abstract The measurement of Rydberg atoms in low-frequency electric fields is hindered due to the shielding effect of the vapor cell against low-frequency electric fields. This study analyzes the electric field shielding effect of Vapor Cell in Rydberg atom electric field sensors, which arises primarily from the polarization charges generated in dielectric materials under electric field influence, as well as the reduced surface resistivity caused by the adsorption of alkali metal atoms on the inner surfaces of the vapor cell. To investigate the electric field shielding resulting from the dielectric materials, we utilized finite element simulation software for analysis and normalized the influencing factors. For the shielding associated with reduced surface resistivity, we measured the electric field transmission coefficients of SiO2 in the 0–60 MHz range using the Stark effect of Rydberg atoms. Additionally, we combined finite element simulations with molecular dynamics analysis software to quantitatively and qualitatively assess the properties of the SiO2 surface after cesium atom adsorption. Building on this foundation, we conducted a simulation analysis of vapor cell made from CaF2. Our results indicate that after cesium atom adsorption, CaF2 retains excellent insulating properties, with a surface resistivity exceeding 1 × 1012 Ω/sq, making it suitable for electric field measurements in the tens of Hz range. Furthermore, we examined the influence of laser transmittance in Vapor Cell on the peak of electromagnetically induced transparency. We measured the laser transmittance of SiO2 and Al2O3 vapor cells and compared these values to the calculated laser transmittance of CaF2. The results revealed that CaF2 exhibits slightly higher laser transmittance than SiO2, demonstrating favorable optical characteristics for use in optical systems. In summary, this research provides significant theoretical insights and experimental support for enhancing the performance of Rydberg atom electric field sensors.
Neurtal atoms in optical tweezer arrays constitute a highly promising platform for quantum computing and quantum simulation. Their operation relies on precise control of the Rydberg excitation, which is highly sensitive to background electric fields. Here, we identify a previously overlooked source of stray electric fields arising from trapped charges within the antireflection coating layers of glass vacuum cells. In contrast to the conventional approach of removing surface charges through ultraviolet-light-induced desorption, we compensate these clamped charges by generating additional charges via photo-ionization of a cold atomic ensemble. We verify the resulting suppression of stray electric fields through Rydberg excitation spectroscopy in an atomic array and further confirm that the residual electric field inside the vacuum cell is effectively eradicated with the aid of external electrodes. Our work identifies and mitigates a previously unrecognized source of residual electric field, providing a practical solution for improving the performance of neutral atomic quantum processors and other Rydberg-based quantum technologies, as well as surface-sensitive atomic systems.
Atoms excited to Rydberg states have recently emerged as a valuable resource in neutral atom platforms for quantum computation, quantum simulation, and quantum information processing. Atoms in Rydberg states have large polarizabilities, which makes them highly sensitive to electric fields. Therefore, stray electric fields can decohere these atoms, in addition to compromising the fidelity of engineered interactions between them. Therefore, it is essential to cancel these stray electric fields. Here, we present a novel, simple, and highly compact electrode assembly, implemented in a glass cell-based vacuum chamber design, for stray electric field cancellation. The electrode assembly allows for full 3D control of the electric field in the vicinity of the atoms while blocking almost no optical access. We experimentally demonstrate the cancellation of stray electric fields to better than 10 mV/cm using this electrode assembly.