Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1412.3388 · IEEE Transactions on Applied Superconductivity

Heat transfer coefficient saturation in superconducting Nb tunnel junctions contacted to a NbTiN circuit and an Au energy relaxation layer

Stefan Selig, M. Westig, Karl Jacobs, Michael Schultz, Cornelia Honingh

Published Jan 1, 2014• 3 citations
arXivHTMLPDF

Abstract

In this paper we present the experimental realization of a Nb tunnel junction connected to a high-gap superconducting NbTiN embedding circuit. We investigate relaxation of nonequilibrium quasiparticles in a small volume Au layer between the Nb tunnel junction and the NbTiN circuit. We find a saturation in the effective heat-transfer coefficient consistent with a simple theoretical model. This saturation is determined by the thickness of the Au layer. Our findings are important for the design of the ideal Au energy relaxation layer for practical SIS heterodyne mixers and we suggest two geometries, one, using a circular Au layer and, two, using a half-circular Au layer. Our work is concluded with an outlook of our future experiments.

DOI
10.1109/tasc.2014.2378054

Related papers

Improved Nb SIS devices for heterodyne mixers between 700GHz and 1.3 THz with NbTiN transmission lines using a normal metal energy relaxation layer

M. Westig, Stefan Selig, Karl Jacobs +2 more

In this paper, we demonstrate experimentally the implementation of a niobium-trilayer junction with an aluminum-oxide tunnel barrier, embedded in a high-gap superconducting niobium-titanium-nitride circuit. Previously reported heating by quasiparticle trapping is removed by inserting a normal metal layer of gold between the niobium junction and the niobium-titanium-nitride layer. We analyze in dc-characterization measurements the cooling of the nonequilibrium quasiparticles in various device geometries having different gold layer thickness and shape. Our work is concluded with remarks for future heterodyne mixer experiments using our device technology. (C) 2013 AIP Publishing LLC.

•Jan 1, 2013•5 citations

Improved Nb SIS devices for heterodyne mixers between 700 GHz and 1.3 THz with NbTiN transmission lines using a normal metal energy relaxation layer

M. Westig, S. Selig, K. Jacobs +2 more

In this paper, we demonstrate experimentally the implementation of a niobium-trilayer junction with an aluminum-oxide tunnel barrier, embedded in a high-gap superconducting niobium-titanium-nitride circuit. Previously reported heating by quasiparticle trapping is removed by inserting a normal metal layer of gold between the niobium junction and the niobium-titanium-nitride layer. We analyze in dc-characterization measurements the cooling of the nonequilibrium quasiparticles in various device geometries having different gold layer thickness and shape. Our work is concluded with remarks for future heterodyne mixer experiments using our device technology.

arXiv:1306.6797•Journal of Applied Physics•Sep 24, 2013•11 citations

Different shape normal metal interlayers between niobium based SIS junctions and niobium titanium nitride leads and their influence on the electron temperature

Stefan Selig, M. Westig, Karl Jacobs +1 more

In this paper we demonstrate the reduction of heating in a niobium superconductor-insulator-superconductor (SIS) junction with aluminum-oxide tunnel barrier embedded in a niobium-titanium-nitride circuit. Nonequilibrium quasiparticles which are created due to the Andreev trap at the interface between the niobium and the niobium-titanium-nitride layers are relaxed by inserting a normal-metal conductor of gold between these two layers. In an earlier work we explained the observed relaxation of nonequilibrium quasiparticles due to the geometrically assisted cooling effect. In this paper we investigate this cooling effect in dependence of the normal-metal layer shape and size. We expect that an adapted normal-metal layer is necessary for implementation in practical terahertz SIS heterodyne mixer circuits. We observe in DC-measurements of a large number of devices a clear relation between the volume of the gold layer and the effective electron temperature in the device. Our central finding is that the shape of the gold layer does not influence the cooling provided that the volume is sufficient.

Journal of Physics Conference Series•May 12, 2014•1 citation

Design of Terahertz SIS Mixers Using Nb/AlN/Nb Junctions Integrated With All-NbTiN Tuning Circuits

Yoshinori Uzawa, M. Kroug, Takafumi Kojima +7 more

We have designed superconductor-insulator-superconductor (SIS) mixers using Nb/AlN/Nb tunnel junctions integrated with NbTiN/SiO2/NbTiN microstrip tuning circuits for the Atacama Large Millimeter/submillimeter Array (ALMA) Band 10 (0.78-0.95 THz). In order to design the tuning circuits, we used terahertz time domain spectroscopy to experimentally derive the complex conductivity of relatively thick NbTiN films deposited on quartz substrate directly as a ground plane and on RF-sputtered SiO2as a microstrip. Results showed that the conductivities of both films can be described by a modified Mattis-Bardeen theory. We also investigated the junction heating effects originating from quasi-particle trapping in the Nb electrodes embedded in NbTiN circuits by varying the volume of the electrodes. It was confirmed that current-voltage curves of Nb/AlN/Nb tunnel junctions with thick (~200 nm) counter electrodes contacting NbTiN wirings showed higher gap voltages as well as reduced back-bending than those with thin (~50 nm) electrodes. Making use of these findings, our designed SIS mixers employing Nb/AlN/Nb junctions with a current density of 15 kA/cm2and all-NbTiN tuning circuits may cover the Band 10 with good sensitivity.

IEEE Transactions on Applied Superconductivity•Nov 28, 2016•12 citations

Low-noise submillimeter-wave NbTiN superconducting tunnel junction mixers

Jonathan H. Kawamura, Jian Chen, David Miller +5 more

We have developed a low-noise 850 GHz superconductor–insulator–superconductor quasiparticle mixer with NbTiN thin-film microstrip tuning circuits and hybrid Nb/AlN/NbTiN tunnel junctions. The mixer uses a quasioptical configuration with a planar twin-slot antenna feeding a two-junction tuning circuit. At 798 GHz, we measured an uncorrected double-sideband receiver noise temperature of TRX=260 K at 4.2 K bath temperature. This mixer outperforms current Nb SIS mixers by a factor of nearly 2 near 800 GHz. The high-gap frequency and low loss at 800 GHz make NbTiN an attractive material with which to fabricate tuning circuits for SIS mixers. NbTiN mixers can potentially operate up to the gap frequency, 2Δ/h∼1.2 THz.

Applied Physics Letters•Dec 20, 1999•81 citations

Dynamics of nonequilibrium quasiparticles in narrow-gap superconducting tunnel junctions

Alexander G. Kozorezov, R. A. Hijmering, Guy Brammertz +6 more

The latest generation of high quality, narrow gap, superconducting tunnel junctions (STJs) exhibits a steady-state and time-dependent behavior which cannot be described satisfactorily by previous treatments of nonequilibrium quasiparticle (qp) dynamics. These effects are particularly evident in experiments using STJs as detectors of photons, over the range from near infrared to x ray. In this paper, we present a detailed theoretical analysis of the spectral and temporal evolution of the nonequilibrium qp and phonon distributions in such STJs excited by single photons, over a wide range of excitation energy, bias voltage, and temperature. By solving the coupled set of kinetic equations describing the interacting excitations, we show that the nonequilibrium qp distribution created by the initial photoabsorption does not decay directly back to the initial undisturbed state in thermal equilibrium. Instead, it undergoes a rapid adiabatic relaxation to a long-lived, excited state, the spectral distribution of which is nonthermal, maintained by a balance between qp creation, recombination, and trapping. The model is able to describe successfully photoabsorption data taken on several different aluminum STJs, using a single set of parameters. Of particular note is the conclusion that the local traps responsible for qp loss are situated specifically in the region of Nb contacts.

Physical Review B•Jan 2, 2008•15 citations
In this paper we present the experimental realization of a Nb tunnel junction connected to a high-gap superconducting NbTiN embedding circuit. We investigate relaxation of nonequilibrium quasiparticles in a small volume Au layer between the Nb tunnel junction and the NbTiN circuit. We find a saturation in the effective heat-transfer coefficient consistent with a simple theoretical model. This saturation is determined by the thickness of the Au layer. Our findings are important for the design of the ideal Au energy relaxation layer for practical SIS heterodyne mixers and we suggest two geometries, one, using a circular Au layer and, two, using a half-circular Au layer. Our work is concluded with an outlook of our future experiments.
In this paper, we demonstrate experimentally the implementation of a niobium-trilayer junction with an aluminum-oxide tunnel barrier, embedded in a high-gap superconducting niobium-titanium-nitride circuit. Previously reported heating by quasiparticle trapping is removed by inserting a normal metal layer of gold between the niobium junction and the niobium-titanium-nitride layer. We analyze in dc-characterization measurements the cooling of the nonequilibrium quasiparticles in various device geometries having different gold layer thickness and shape. Our work is concluded with remarks for future heterodyne mixer experiments using our device technology. (C) 2013 AIP Publishing LLC.
In this paper, we demonstrate experimentally the implementation of a niobium-trilayer junction with an aluminum-oxide tunnel barrier, embedded in a high-gap superconducting niobium-titanium-nitride circuit. Previously reported heating by quasiparticle trapping is removed by inserting a normal metal layer of gold between the niobium junction and the niobium-titanium-nitride layer. We analyze in dc-characterization measurements the cooling of the nonequilibrium quasiparticles in various device geometries having different gold layer thickness and shape. Our work is concluded with remarks for future heterodyne mixer experiments using our device technology.
In this paper we demonstrate the reduction of heating in a niobium superconductor-insulator-superconductor (SIS) junction with aluminum-oxide tunnel barrier embedded in a niobium-titanium-nitride circuit. Nonequilibrium quasiparticles which are created due to the Andreev trap at the interface between the niobium and the niobium-titanium-nitride layers are relaxed by inserting a normal-metal conductor of gold between these two layers. In an earlier work we explained the observed relaxation of nonequilibrium quasiparticles due to the geometrically assisted cooling effect. In this paper we investigate this cooling effect in dependence of the normal-metal layer shape and size. We expect that an adapted normal-metal layer is necessary for implementation in practical terahertz SIS heterodyne mixer circuits. We observe in DC-measurements of a large number of devices a clear relation between the volume of the gold layer and the effective electron temperature in the device. Our central finding is that the shape of the gold layer does not influence the cooling provided that the volume is sufficient.
We have designed superconductor-insulator-superconductor (SIS) mixers using Nb/AlN/Nb tunnel junctions integrated with NbTiN/SiO2/NbTiN microstrip tuning circuits for the Atacama Large Millimeter/submillimeter Array (ALMA) Band 10 (0.78-0.95 THz). In order to design the tuning circuits, we used terahertz time domain spectroscopy to experimentally derive the complex conductivity of relatively thick NbTiN films deposited on quartz substrate directly as a ground plane and on RF-sputtered SiO2as a microstrip. Results showed that the conductivities of both films can be described by a modified Mattis-Bardeen theory. We also investigated the junction heating effects originating from quasi-particle trapping in the Nb electrodes embedded in NbTiN circuits by varying the volume of the electrodes. It was confirmed that current-voltage curves of Nb/AlN/Nb tunnel junctions with thick (~200 nm) counter electrodes contacting NbTiN wirings showed higher gap voltages as well as reduced back-bending than those with thin (~50 nm) electrodes. Making use of these findings, our designed SIS mixers employing Nb/AlN/Nb junctions with a current density of 15 kA/cm2and all-NbTiN tuning circuits may cover the Band 10 with good sensitivity.
We have developed a low-noise 850 GHz superconductor–insulator–superconductor quasiparticle mixer with NbTiN thin-film microstrip tuning circuits and hybrid Nb/AlN/NbTiN tunnel junctions. The mixer uses a quasioptical configuration with a planar twin-slot antenna feeding a two-junction tuning circuit. At 798 GHz, we measured an uncorrected double-sideband receiver noise temperature of TRX=260 K at 4.2 K bath temperature. This mixer outperforms current Nb SIS mixers by a factor of nearly 2 near 800 GHz. The high-gap frequency and low loss at 800 GHz make NbTiN an attractive material with which to fabricate tuning circuits for SIS mixers. NbTiN mixers can potentially operate up to the gap frequency, 2Δ/h∼1.2 THz.
The latest generation of high quality, narrow gap, superconducting tunnel junctions (STJs) exhibits a steady-state and time-dependent behavior which cannot be described satisfactorily by previous treatments of nonequilibrium quasiparticle (qp) dynamics. These effects are particularly evident in experiments using STJs as detectors of photons, over the range from near infrared to x ray. In this paper, we present a detailed theoretical analysis of the spectral and temporal evolution of the nonequilibrium qp and phonon distributions in such STJs excited by single photons, over a wide range of excitation energy, bias voltage, and temperature. By solving the coupled set of kinetic equations describing the interacting excitations, we show that the nonequilibrium qp distribution created by the initial photoabsorption does not decay directly back to the initial undisturbed state in thermal equilibrium. Instead, it undergoes a rapid adiabatic relaxation to a long-lived, excited state, the spectral distribution of which is nonthermal, maintained by a balance between qp creation, recombination, and trapping. The model is able to describe successfully photoabsorption data taken on several different aluminum STJs, using a single set of parameters. Of particular note is the conclusion that the local traps responsible for qp loss are situated specifically in the region of Nb contacts.