Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1409.1394

Exploring the limits of multiplexed photon-pair sources for the preparation of pure single-photon states

Robert J. A. Francis-Jones, Peter J. Mosley

Published Sep 4, 2014• 9 citations
arXivHTMLPDF

Abstract

Current sources of heralded single photons based on nonlinear optics operate in a probabilistic manner. In order to build quantum-enhanced devices based around the use of single photons, compact, turn-key and deterministic sources are required. A possible solution is to multiplex a number of sources to increase the single-photon generation probability and in so doing reducing the waiting time to deliver large numbers of photons simultaneously, from independent sources. Previously it has been shown that, in the ideal case, 17 multiplexed sources allow deterministic generation of heralded single photons [Christ and Silberhorn, Phys. Rev. A 85, 023829 (2012)]. Here we extend this analysis to include undesirable effects of detector inefficiency and photon loss on a number of multiplexed sources using a variety of different detectors for heralding. We compare these systems for fixed signal-to-noise ratio to allow a direct comparison of performance for real- world heralded single photon sources.

DOI
10.48550/arxiv.1409.1394

Related papers

Asymmetric architecture for heralded single-photon sources

Luca Mazzarella, Francesco Ticozzi, Alexander V. Sergienko +2 more

Single-photon sources represent a fundamental building block for optical implementations of quantum information tasks ranging from basic tests of quantum physics to quantum communication and high-resolution quantum measurement. In this paper, in order to compare the effectiveness of different designs, we introduce a single-photon source performance index, based on the maximum probability of generating a single photon that still guarantees a given signal-to-noise ratio. We then investigate the performance of a multiplexed system based on asymmetric configuration of multiple heralded single-photon sources. The performance and scalability comparison with both currently existing multiple-source architectures and faint laser configurations reveals an advantage the proposed scheme offers in realistic scenarios. This analysis also provides insights on the potential of using such architectures for integrated implementation.

arXiv:1210.6878•Physical Review A•Aug 27, 2013•43 citations

Effect of loss on multiplexed single-photon sources

Damien Bonneau, Gabriel J. Mendoza, Jeremy L. O’Brien +1 more

An on-demand single-photon source is a key requirement for scaling many optical quantum technologies. A promising approach to realize an on-demand single-photon source is to multiplex an array of heralded single-photon sources using an active optical switching network. However, the performance of multiplexed sources is degraded by photon loss in the optical components and the non-unit detection efficiency of the heralding detectors. We provide a theoretical description of a general multiplexed single-photon source with lossy components and derive expressions for the output probabilities of single-photon emission and multi-photon contamination. We apply these expressions to three specific multiplexing source architectures and consider their tradeoffs in design and performance. To assess the effect of lossy components on near- and long-term experimental goals, we simulate the multiplexed sources when used for many-photon state generation under various amounts of component loss. We find that with a multiplexed source composed of switches with ∼ 0.2 − 0.4 dB loss and high efficiency number-resolving detectors, a single-photon source capable of efficiently producing 20–40 photon states with low multi-photon contamination is possible, offering the possibility of unlocking new classes of experiments and technologies.

arXiv:1409.5341•New Journal of Physics•Apr 28, 2015•90 citations

High-Performance Single-Photon Sources via Spatial Multiplexing

Kevin T. McCusker, Yu‐Ping Huang, Gregory S. Kanter

Abstract : Single photons sources are desired for many potential quantum information applications. One common method to produce single photons is based on a heralding protocol, which involves generating a pair of photons in an optical nonlinear medium and then detecting one photon in the pair to announce the existence of the other photon of the pair. Compared to other schemes, such a method offers several significant advantages. A major challenge to overcome which is inherent to this method, however, is that the photon pairs are created stochastically in the optical nonlinear medium. Thus, in order to ensure high purity levels for the single photons generated via heralding, sources of this type must be operated at low photon-pair production rates in order to keep the probability for simultaneous creation of multiple photon-pairs to an acceptably low level. A direct result of this restriction is a low heralding rate of single photons. A potential solution for achieving high-rate, high-purity, single-photon generation combines several heralding single-photon sources which are actively multiplexed to act as one source. The overall goal of this project is to develop methods to perform such multiplexing based on the use of a low loss high speed fiber optical switch.

•Jan 1, 2014•0 citations

Effect of Loss on Multiplexed Single-Photon Sources (Open Access Publisher's Version)

Damien Bonneau, Gabriel J. Mendoza, Jeremy L. O’Brien +1 more

Abstract : An on-demand single-photon source is a key requirement for scaling many optical quantum technologies. A promising approach to realize an on-demand single-photon source is to multiplex an array of heralded single-photon sources using an active optical switching network. However, the performance of multiplexed sources is degraded by photon loss in the optical components and the non-unit detection efficiency of the heralding detectors. We provide a theoretical description of a general multiplexed single-photon source with lossy components and derive expressions for the output probabilities of single-photon emission and multi-photon contamination. We apply these expressions to three specific multiplexing source architectures and consider their tradeoffs in design and performance. To assess the effect of lossy components on near- and long-term experimental goals, we simulate the multiplexed sources when used for many-photon state generation under various amounts of component loss. We find that with a multiplexed source composed of switches with0.20.4 dB loss and high efficiency number-resolving detectors, a single-photon source capable of efficiently producing 2040 photon states with low multi-photon contamination is possible, offering the possibility of unlocking new classes of experiments and technologies.

•Apr 28, 2015•1 citation

Six-photon experiments using an on-chip array of heralded, pure single photon sources

Justin B. Spring, Paolo L. Mennea, Benjamin J. Metcalf +8 more

Heralded single photon sources, based on probabilistic non-linear interactions, currently serve as the de-facto standard for performing multi-photon quantum interference experiments. Already, interesting phenomena may be explored with a handful of such sources [1], whilst in the future, large arrays of identical sources could be multiplexed with a switching network to achieve a truly scalable, near-deterministic emission [2]. However, fabricating such a large number of indistinguishable, pure, heralded single photon sources, operating with low-loss, remains an open challenge. Spontaneous four-wave mixing (SFWM) in a silica waveguide is a promising route to building such a source. The low-loss and excellent mode-matching to optical fibre of silica waveguides allows high preparation efficiency. Guided-wave photonics also allows the precise control of the optical modes needed to engineer emission of photons into a single pair of Schmidt modes: allowing heralded photons of high purity without narrowband filtering [3].

European Quantum Electronics Conference (EQEC)•Jun 21, 2015•0 citations

High-efficiency single-photon generation via large-scale active time multiplexing

Fumihiro Kaneda, Paul G. Kwiat

Deterministic generation of single- and multiphoton states is a key requirement for large-scale optical quantum information and communication applications. While heralded single-photon sources (HSPSs) using nonlinear optical processes have enabled proof-of-principle demonstrations in this area of research, they are not scalable as their probabilistic nature severely limits their generation efficiency. We overcome this limitation by demonstrating a substantial improvement in HSPS efficiency via large-scale time multiplexing. Using an ultra-low loss, adjustable optical delay to multiplex 40 conventional HSPS photon generation processes into each operation cycle, we have observed a factor of 9.7(5) enhancement in efficiency, yielding a 66.7(24)% probability of collecting a single photon with high indistinguishability (90%) into a single-mode fiber per cycle. We also experimentally investigate the trade-off between a high single-photon probability and unwanted multiphoton emission. Upgrading our time-multiplexed source with state-of-the-art HSPS and single-photon detector technologies will enable the generation of >30 coincident photons with unprecedented efficiency.

arXiv:1803.04803•Science Advances•Oct 4, 2019•232 citations
Current sources of heralded single photons based on nonlinear optics operate in a probabilistic manner. In order to build quantum-enhanced devices based around the use of single photons, compact, turn-key and deterministic sources are required. A possible solution is to multiplex a number of sources to increase the single-photon generation probability and in so doing reducing the waiting time to deliver large numbers of photons simultaneously, from independent sources. Previously it has been shown that, in the ideal case, 17 multiplexed sources allow deterministic generation of heralded single photons [Christ and Silberhorn, Phys. Rev. A 85, 023829 (2012)]. Here we extend this analysis to include undesirable effects of detector inefficiency and photon loss on a number of multiplexed sources using a variety of different detectors for heralding. We compare these systems for fixed signal-to-noise ratio to allow a direct comparison of performance for real- world heralded single photon sources.
Single-photon sources represent a fundamental building block for optical implementations of quantum information tasks ranging from basic tests of quantum physics to quantum communication and high-resolution quantum measurement. In this paper, in order to compare the effectiveness of different designs, we introduce a single-photon source performance index, based on the maximum probability of generating a single photon that still guarantees a given signal-to-noise ratio. We then investigate the performance of a multiplexed system based on asymmetric configuration of multiple heralded single-photon sources. The performance and scalability comparison with both currently existing multiple-source architectures and faint laser configurations reveals an advantage the proposed scheme offers in realistic scenarios. This analysis also provides insights on the potential of using such architectures for integrated implementation.
An on-demand single-photon source is a key requirement for scaling many optical quantum technologies. A promising approach to realize an on-demand single-photon source is to multiplex an array of heralded single-photon sources using an active optical switching network. However, the performance of multiplexed sources is degraded by photon loss in the optical components and the non-unit detection efficiency of the heralding detectors. We provide a theoretical description of a general multiplexed single-photon source with lossy components and derive expressions for the output probabilities of single-photon emission and multi-photon contamination. We apply these expressions to three specific multiplexing source architectures and consider their tradeoffs in design and performance. To assess the effect of lossy components on near- and long-term experimental goals, we simulate the multiplexed sources when used for many-photon state generation under various amounts of component loss. We find that with a multiplexed source composed of switches with ∼ 0.2 − 0.4 dB loss and high efficiency number-resolving detectors, a single-photon source capable of efficiently producing 20–40 photon states with low multi-photon contamination is possible, offering the possibility of unlocking new classes of experiments and technologies.
Abstract : Single photons sources are desired for many potential quantum information applications. One common method to produce single photons is based on a heralding protocol, which involves generating a pair of photons in an optical nonlinear medium and then detecting one photon in the pair to announce the existence of the other photon of the pair. Compared to other schemes, such a method offers several significant advantages. A major challenge to overcome which is inherent to this method, however, is that the photon pairs are created stochastically in the optical nonlinear medium. Thus, in order to ensure high purity levels for the single photons generated via heralding, sources of this type must be operated at low photon-pair production rates in order to keep the probability for simultaneous creation of multiple photon-pairs to an acceptably low level. A direct result of this restriction is a low heralding rate of single photons. A potential solution for achieving high-rate, high-purity, single-photon generation combines several heralding single-photon sources which are actively multiplexed to act as one source. The overall goal of this project is to develop methods to perform such multiplexing based on the use of a low loss high speed fiber optical switch.
Abstract : An on-demand single-photon source is a key requirement for scaling many optical quantum technologies. A promising approach to realize an on-demand single-photon source is to multiplex an array of heralded single-photon sources using an active optical switching network. However, the performance of multiplexed sources is degraded by photon loss in the optical components and the non-unit detection efficiency of the heralding detectors. We provide a theoretical description of a general multiplexed single-photon source with lossy components and derive expressions for the output probabilities of single-photon emission and multi-photon contamination. We apply these expressions to three specific multiplexing source architectures and consider their tradeoffs in design and performance. To assess the effect of lossy components on near- and long-term experimental goals, we simulate the multiplexed sources when used for many-photon state generation under various amounts of component loss. We find that with a multiplexed source composed of switches with0.20.4 dB loss and high efficiency number-resolving detectors, a single-photon source capable of efficiently producing 2040 photon states with low multi-photon contamination is possible, offering the possibility of unlocking new classes of experiments and technologies.
Heralded single photon sources, based on probabilistic non-linear interactions, currently serve as the de-facto standard for performing multi-photon quantum interference experiments. Already, interesting phenomena may be explored with a handful of such sources [1], whilst in the future, large arrays of identical sources could be multiplexed with a switching network to achieve a truly scalable, near-deterministic emission [2]. However, fabricating such a large number of indistinguishable, pure, heralded single photon sources, operating with low-loss, remains an open challenge. Spontaneous four-wave mixing (SFWM) in a silica waveguide is a promising route to building such a source. The low-loss and excellent mode-matching to optical fibre of silica waveguides allows high preparation efficiency. Guided-wave photonics also allows the precise control of the optical modes needed to engineer emission of photons into a single pair of Schmidt modes: allowing heralded photons of high purity without narrowband filtering [3].
Deterministic generation of single- and multiphoton states is a key requirement for large-scale optical quantum information and communication applications. While heralded single-photon sources (HSPSs) using nonlinear optical processes have enabled proof-of-principle demonstrations in this area of research, they are not scalable as their probabilistic nature severely limits their generation efficiency. We overcome this limitation by demonstrating a substantial improvement in HSPS efficiency via large-scale time multiplexing. Using an ultra-low loss, adjustable optical delay to multiplex 40 conventional HSPS photon generation processes into each operation cycle, we have observed a factor of 9.7(5) enhancement in efficiency, yielding a 66.7(24)% probability of collecting a single photon with high indistinguishability (90%) into a single-mode fiber per cycle. We also experimentally investigate the trade-off between a high single-photon probability and unwanted multiphoton emission. Upgrading our time-multiplexed source with state-of-the-art HSPS and single-photon detector technologies will enable the generation of >30 coincident photons with unprecedented efficiency.