Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1409.5341 · New Journal of Physics

Effect of loss on multiplexed single-photon sources

Damien Bonneau, Gabriel J. Mendoza, Jeremy L. O’Brien, Mark G. Thompson

Published Apr 28, 2015• 90 citations
arXivHTMLPDF

Abstract

An on-demand single-photon source is a key requirement for scaling many optical quantum technologies. A promising approach to realize an on-demand single-photon source is to multiplex an array of heralded single-photon sources using an active optical switching network. However, the performance of multiplexed sources is degraded by photon loss in the optical components and the non-unit detection efficiency of the heralding detectors. We provide a theoretical description of a general multiplexed single-photon source with lossy components and derive expressions for the output probabilities of single-photon emission and multi-photon contamination. We apply these expressions to three specific multiplexing source architectures and consider their tradeoffs in design and performance. To assess the effect of lossy components on near- and long-term experimental goals, we simulate the multiplexed sources when used for many-photon state generation under various amounts of component loss. We find that with a multiplexed source composed of switches with ∼ 0.2 − 0.4 dB loss and high efficiency number-resolving detectors, a single-photon source capable of efficiently producing 20–40 photon states with low multi-photon contamination is possible, offering the possibility of unlocking new classes of experiments and technologies.

DOI
10.1088/1367-2630/17/4/043057

Related papers

Effect of Loss on Multiplexed Single-Photon Sources (Open Access Publisher's Version)

Damien Bonneau, Gabriel J. Mendoza, Jeremy L. O’Brien +1 more

Abstract : An on-demand single-photon source is a key requirement for scaling many optical quantum technologies. A promising approach to realize an on-demand single-photon source is to multiplex an array of heralded single-photon sources using an active optical switching network. However, the performance of multiplexed sources is degraded by photon loss in the optical components and the non-unit detection efficiency of the heralding detectors. We provide a theoretical description of a general multiplexed single-photon source with lossy components and derive expressions for the output probabilities of single-photon emission and multi-photon contamination. We apply these expressions to three specific multiplexing source architectures and consider their tradeoffs in design and performance. To assess the effect of lossy components on near- and long-term experimental goals, we simulate the multiplexed sources when used for many-photon state generation under various amounts of component loss. We find that with a multiplexed source composed of switches with0.20.4 dB loss and high efficiency number-resolving detectors, a single-photon source capable of efficiently producing 2040 photon states with low multi-photon contamination is possible, offering the possibility of unlocking new classes of experiments and technologies.

•Apr 28, 2015•1 citation

High probability multiplexed multi-port single-photon source based on combinatorial heralding

Baojie Hou, Haoran Ma, Zichao Zhao +11 more

Scalable quantum photonic technologies require the simultaneous production of highly indistinguishable multi-photon states with high probability. This need may be met, and the output probability significantly increased by multiplexed sources, which channel numerous low-probability heralded single-photon sources into a specified output mode using time or spatial multiplexing. However, conventional methods merely replicate these multiplexing units when scaled to multiple output modes, which is fundamentally inefficient because it discards many valid multi-photon events. To address this, we propose and experimentally demonstrate a novel multiplexing source architecture based on a multi-input/multi-output switching network, which can utilize combinatorial photon events. A super-exponential enhancement in multi-port single-photon creation is revealed by theoretical analysis, which significantly reduces the number of heralded single-photon sources needed. We demonstrate multiplexing with two output ports, supported by four integrated heralded single-photon sources. Our strategy has a generation probability of 1.60 times that of conventional methods and 2.58 times that of implementations without multiplexing. This multi-port multiplexed method opens a new avenue for establishing a solid foundation for advanced multi-photon quantum interference and large-scale quantum information processing.

npj Quantum Information•Aug 11, 2026•0 citations

Optimization of multiplexed single-photon sources operated with photon-number-resolving detectors

Ferenc Bódog, Matyas I. Mechler, Mátyás Koniorczyk +1 more

Detectors inherently capable of resolving photon numbers have undergone a significant development recently, and this is expected to affect multiplexed periodic single-photon sources where such detectors can find their applications. We analyze various spatially and time-multiplexed periodic single-photon source arrangements with photon-number-resolving detectors, partly to identify the cases when they outperform those with threshold detectors. We develop a full statistical description of these arrangements in order to optimize such systems with respect to maximal single-photon probability, taking into account all relevant loss mechanisms. The model is suitable for the description of all spatial and time multiplexing schemes. Our detailed analysis of symmetric spatial multiplexing identifies a particular range of loss parameters in which the use of the new type of detectors leads to an improvement. Photon number resolution opens an additional possibility for optimizing the system in that the heralding strategy can be defined in terms of actual detected photon numbers. Our results show that this kind of optimization opens an additional parameter range of improved efficiency. Moreover, this higher efficiency can be achieved by using less multiplexed units, i.e., smaller system size as compared to threshold-detector schemes. We also extend our investigation to certain time-multiplexed schemes of actual experimental relevance. We find that the highest single-photon probability is 0.907 that can be achieved by binary bulk time multiplexers using photon-number-resolving detectors.

arXiv:2003.11275•Physical Review A•Jul 23, 2020•16 citations

Experimental generation of single photons via active multiplexing

Xiao‐Song Ma, Stefan Zotter, Johannes Kofler +2 more

An on-demand single-photon source is a fundamental building block in quantum science and technology. We experimentally demonstrate the proof of concept for a scheme to generate on-demand single photons via actively multiplexing several heralded photons probabilistically produced from pulsed spontaneous parametric down-conversions (SPDCs). By utilizing a four-photon-pair source, an active feed-forward technique, and an ultrafast single-photon router, we show a fourfold enhancement of the output photon rate. Simultaneously, we maintain the quality of the output single-photon states, confirmed by correlation measurements. We also experimentally verify, via Hong-Ou-Mandel interference, that the router does not affect the indistinguishability of the single photons. Furthermore, we give numerical simulations, which indicate that photons based on multiplexing of four SPDC sources can outperform the heralding based on highly advanced photon-number-resolving detectors. Our results show a route for on-demand single-photon generation and the practical realization of scalable linear optical quantum-information processing.

arXiv:1007.4798•Physical Review A•Apr 13, 2011•211 citations

Multiplexed pseudo-deterministic photon source with asymmetric switching elements

Sebastian Brandhofer, Casey R. Myers, Simon J. Devitt +1 more

Abstract The reliable, deterministic production of trustworthy high-quality single photons is a critical component of discrete variable, optical quantum technology. For single-photon based fully error-corrected quantum computing systems, it is estimated that photon sources will be required to produce a reliable stream of photons at rates exceeding 1 GHz (Vigliar et al., 2021). Photon multiplexing, where low probability sources are combined with switching networks to route successful production events to an output, are a potential solution but requires extremely fast single-photon switching with ultra-low-loss rates. In this paper, we examine the specific properties of the switching elements and present a new design that exploits the general one-way properties of common switching elements such as thermal pads. By introducing multiple switches to a basic, temporal multiplexing device, we can use slow switching elements in a multiplexed source being pumped at much faster rates. We model this design under multiple error channels and show that anticipated performance is now limited by the intrinsic loss rate of the optical waveguides within integrated photonic chipsets. While the developed design does not achieve the necessary 1 GHz photon rate, we demonstrate design elements that could become useful when underlying technology improves.

arXiv:2301.07258•Research Directions Quantum Technologies•Jan 1, 2024•5 citations

High-efficiency single-photon generation via large-scale active time multiplexing

Fumihiro Kaneda, Paul G. Kwiat

Deterministic generation of single- and multiphoton states is a key requirement for large-scale optical quantum information and communication applications. While heralded single-photon sources (HSPSs) using nonlinear optical processes have enabled proof-of-principle demonstrations in this area of research, they are not scalable as their probabilistic nature severely limits their generation efficiency. We overcome this limitation by demonstrating a substantial improvement in HSPS efficiency via large-scale time multiplexing. Using an ultra-low loss, adjustable optical delay to multiplex 40 conventional HSPS photon generation processes into each operation cycle, we have observed a factor of 9.7(5) enhancement in efficiency, yielding a 66.7(24)% probability of collecting a single photon with high indistinguishability (90%) into a single-mode fiber per cycle. We also experimentally investigate the trade-off between a high single-photon probability and unwanted multiphoton emission. Upgrading our time-multiplexed source with state-of-the-art HSPS and single-photon detector technologies will enable the generation of >30 coincident photons with unprecedented efficiency.

arXiv:1803.04803•Science Advances•Oct 4, 2019•232 citations
An on-demand single-photon source is a key requirement for scaling many optical quantum technologies. A promising approach to realize an on-demand single-photon source is to multiplex an array of heralded single-photon sources using an active optical switching network. However, the performance of multiplexed sources is degraded by photon loss in the optical components and the non-unit detection efficiency of the heralding detectors. We provide a theoretical description of a general multiplexed single-photon source with lossy components and derive expressions for the output probabilities of single-photon emission and multi-photon contamination. We apply these expressions to three specific multiplexing source architectures and consider their tradeoffs in design and performance. To assess the effect of lossy components on near- and long-term experimental goals, we simulate the multiplexed sources when used for many-photon state generation under various amounts of component loss. We find that with a multiplexed source composed of switches with ∼ 0.2 − 0.4 dB loss and high efficiency number-resolving detectors, a single-photon source capable of efficiently producing 20–40 photon states with low multi-photon contamination is possible, offering the possibility of unlocking new classes of experiments and technologies.
Abstract : An on-demand single-photon source is a key requirement for scaling many optical quantum technologies. A promising approach to realize an on-demand single-photon source is to multiplex an array of heralded single-photon sources using an active optical switching network. However, the performance of multiplexed sources is degraded by photon loss in the optical components and the non-unit detection efficiency of the heralding detectors. We provide a theoretical description of a general multiplexed single-photon source with lossy components and derive expressions for the output probabilities of single-photon emission and multi-photon contamination. We apply these expressions to three specific multiplexing source architectures and consider their tradeoffs in design and performance. To assess the effect of lossy components on near- and long-term experimental goals, we simulate the multiplexed sources when used for many-photon state generation under various amounts of component loss. We find that with a multiplexed source composed of switches with0.20.4 dB loss and high efficiency number-resolving detectors, a single-photon source capable of efficiently producing 2040 photon states with low multi-photon contamination is possible, offering the possibility of unlocking new classes of experiments and technologies.
Scalable quantum photonic technologies require the simultaneous production of highly indistinguishable multi-photon states with high probability. This need may be met, and the output probability significantly increased by multiplexed sources, which channel numerous low-probability heralded single-photon sources into a specified output mode using time or spatial multiplexing. However, conventional methods merely replicate these multiplexing units when scaled to multiple output modes, which is fundamentally inefficient because it discards many valid multi-photon events. To address this, we propose and experimentally demonstrate a novel multiplexing source architecture based on a multi-input/multi-output switching network, which can utilize combinatorial photon events. A super-exponential enhancement in multi-port single-photon creation is revealed by theoretical analysis, which significantly reduces the number of heralded single-photon sources needed. We demonstrate multiplexing with two output ports, supported by four integrated heralded single-photon sources. Our strategy has a generation probability of 1.60 times that of conventional methods and 2.58 times that of implementations without multiplexing. This multi-port multiplexed method opens a new avenue for establishing a solid foundation for advanced multi-photon quantum interference and large-scale quantum information processing.
Detectors inherently capable of resolving photon numbers have undergone a significant development recently, and this is expected to affect multiplexed periodic single-photon sources where such detectors can find their applications. We analyze various spatially and time-multiplexed periodic single-photon source arrangements with photon-number-resolving detectors, partly to identify the cases when they outperform those with threshold detectors. We develop a full statistical description of these arrangements in order to optimize such systems with respect to maximal single-photon probability, taking into account all relevant loss mechanisms. The model is suitable for the description of all spatial and time multiplexing schemes. Our detailed analysis of symmetric spatial multiplexing identifies a particular range of loss parameters in which the use of the new type of detectors leads to an improvement. Photon number resolution opens an additional possibility for optimizing the system in that the heralding strategy can be defined in terms of actual detected photon numbers. Our results show that this kind of optimization opens an additional parameter range of improved efficiency. Moreover, this higher efficiency can be achieved by using less multiplexed units, i.e., smaller system size as compared to threshold-detector schemes. We also extend our investigation to certain time-multiplexed schemes of actual experimental relevance. We find that the highest single-photon probability is 0.907 that can be achieved by binary bulk time multiplexers using photon-number-resolving detectors.
An on-demand single-photon source is a fundamental building block in quantum science and technology. We experimentally demonstrate the proof of concept for a scheme to generate on-demand single photons via actively multiplexing several heralded photons probabilistically produced from pulsed spontaneous parametric down-conversions (SPDCs). By utilizing a four-photon-pair source, an active feed-forward technique, and an ultrafast single-photon router, we show a fourfold enhancement of the output photon rate. Simultaneously, we maintain the quality of the output single-photon states, confirmed by correlation measurements. We also experimentally verify, via Hong-Ou-Mandel interference, that the router does not affect the indistinguishability of the single photons. Furthermore, we give numerical simulations, which indicate that photons based on multiplexing of four SPDC sources can outperform the heralding based on highly advanced photon-number-resolving detectors. Our results show a route for on-demand single-photon generation and the practical realization of scalable linear optical quantum-information processing.
Abstract The reliable, deterministic production of trustworthy high-quality single photons is a critical component of discrete variable, optical quantum technology. For single-photon based fully error-corrected quantum computing systems, it is estimated that photon sources will be required to produce a reliable stream of photons at rates exceeding 1 GHz (Vigliar et al., 2021). Photon multiplexing, where low probability sources are combined with switching networks to route successful production events to an output, are a potential solution but requires extremely fast single-photon switching with ultra-low-loss rates. In this paper, we examine the specific properties of the switching elements and present a new design that exploits the general one-way properties of common switching elements such as thermal pads. By introducing multiple switches to a basic, temporal multiplexing device, we can use slow switching elements in a multiplexed source being pumped at much faster rates. We model this design under multiple error channels and show that anticipated performance is now limited by the intrinsic loss rate of the optical waveguides within integrated photonic chipsets. While the developed design does not achieve the necessary 1 GHz photon rate, we demonstrate design elements that could become useful when underlying technology improves.
Deterministic generation of single- and multiphoton states is a key requirement for large-scale optical quantum information and communication applications. While heralded single-photon sources (HSPSs) using nonlinear optical processes have enabled proof-of-principle demonstrations in this area of research, they are not scalable as their probabilistic nature severely limits their generation efficiency. We overcome this limitation by demonstrating a substantial improvement in HSPS efficiency via large-scale time multiplexing. Using an ultra-low loss, adjustable optical delay to multiplex 40 conventional HSPS photon generation processes into each operation cycle, we have observed a factor of 9.7(5) enhancement in efficiency, yielding a 66.7(24)% probability of collecting a single photon with high indistinguishability (90%) into a single-mode fiber per cycle. We also experimentally investigate the trade-off between a high single-photon probability and unwanted multiphoton emission. Upgrading our time-multiplexed source with state-of-the-art HSPS and single-photon detector technologies will enable the generation of >30 coincident photons with unprecedented efficiency.