A challenge for scaling up quantum processors using frequency-crowded, weakly anharmonic qubits is to drive individual qubits without causing leakage into non-computational levels of the others, while also minimizing the number of control lines. To address this, we implement single-qubit Wah-Wah control in a circuit QED processor with a single feedline for all transmon qubits, operating at the maximum gate speed achievable given the frequency crowding. Randomized benchmarking and quantum process tomography confirm alternating qubit control with $\leq$1% average error per computational step and decoherence-limited idling of one qubit while driving another with a Wah-Wah pulse train.
A challenge for scaling up quantum processors using frequency-crowded, weakly anharmonic qubits is to drive individual qubits without causing leakage into non-computational levels of the others, while also minimizing the number of control lines. To address this, we implement single-qubit Wah-Wah control in a circuit QED processor with a single feedline for all transmon qubits, operating at the maximum gate speed achievable given the frequency crowding. Randomized benchmarking and quantum process tomography confirm alternating qubit control with ≤1% average error per computational step and decoherence-limited idling of one qubit while driving another with a Wah-Wah pulse train.
Recent experimental work on superconducting transmon qubits in three-dimensional (3D) cavities shows that their coherence times are increased by an order of magnitude compared to their two-dimensional cavity counterparts. However, to take advantage of these coherence times while scaling up the number of qubits it is advantageous to address individual qubits which are all coupled to the same 3D cavity fields. The challenge in controlling this system comes from spectral crowding, where the leakage transition of qubits is close to computational transitions in other qubits. Here, it is shown that fast pulses are possible which address single qubits using two-quadrature control of the pulse envelope, while the derivative removal by adiabatic gate method of Motzoi et al. [Phys. Rev. Lett. 103, 110501 (2009)] alone only gives marginal improvements over the conventional Gaussian pulse shape. On the other hand, a first-order result using the Magnus expansion gives a fast analytical pulse shape which gives a high-fidelity gate for a specific gate time, up to a phase factor on the second qubit. Further numerical analysis corroborates these results and yields to even faster gates, showing that leakage-state anharmonicity does not provide a fundamental quantum speed limit.
A critical ingredient for realising large-scale quantum information processors will be the ability to make economical use of qubit control hardware. We demonstrate an extensible strategy for reusing control hardware on same-frequency transmon qubits in a circuit QED chip with surface-code-compatible connectivity. A vector switch matrix enables selective broadcasting of input pulses to multiple transmons with individual tailoring of pulse quadratures for each, as required to minimise the effects of leakage on weakly anharmonic qubits. Using randomised benchmarking, we compare multiple broadcasting strategies that each pass the surface-code error threshold for single-qubit gates. In particular, we introduce a selective broadcasting control strategy using five pulse primitives, which allows independent, simultaneous Clifford gates on arbitrary numbers of qubits.
Abstract A critical ingredient for realising large-scale quantum information processors will be the ability to make economical use of qubit control hardware. We demonstrate an extensible strategy for reusing control hardware on same-frequency transmon qubits in a circuit QED chip with surface-code-compatible connectivity. A vector switch matrix enables selective broadcasting of input pulses to multiple transmons with individual tailoring of pulse quadratures for each, as required to minimise the effects of leakage on weakly anharmonic qubits. Using randomised benchmarking, we compare multiple broadcasting strategies that each pass the surface-code error threshold for single-qubit gates. In particular, we introduce a selective broadcasting control strategy using five pulse primitives, which allows independent, simultaneous Clifford gates on arbitrary numbers of qubits.
Logic gates in superconducting quantum processors are implemented through precisely shaped microwave pulses, whose durations are constrained by both device coherence and the multilevel structure of artificial atoms. While single-qubit fidelities above 0.999 are routinely achieved, the physical execution time of these gates remains a major bottleneck for deep quantum circuits. Here we examine single-qubit control across adiabatic [where the rotating-wave approximation (RWA) is valid], intermediate, and diabatic driving regimes using both an ideal two-level model and a realistic weakly anharmonic transmon Hamiltonian. By sweeping pulse durations and drive strengths over experimentally relevant ranges, we compare performance trade-offs and identify the conditions under which ultrashort gates remain viable. Our simulations uncover a quantitative speed-limit mechanism intrinsic to weakly anharmonic superconducting qubits: leakage to higher levels rises sharply once the peak Rabi rate exceeds a fixed fraction of the anharmonicity. Across all pulse shapes and driving regimes studied, we find a consistent numerical threshold at Ω max /|Δ|≈0.15−0.20, where Ω max denotes the peak drive (Rabi) amplitude and Δ is the transmon anharmonicity. Beyond this ratio, gate fidelity deteriorates regardless of waveform engineering. This boundary, obtained from full multilevel time-domain simulations spanning adiabatic, intermediate, and diabatic regimes, constitutes a previously unreported characterization of the fundamental leakage barrier in transmon devices. Our results, therefore, provide the first unified quantitative map linking pulse duration, driving strength, and anharmonicity, establishing why realistic superconducting qubits cannot sustain picosecond-scale gates despite ideal two-level predictions, and offering a practical benchmark for next-generation architectures seeking shorter, high-fidelity control.
Superconducting transmon qubits comprise one of the most promising platforms for quantum information processing due to their long coherence times and to their scalability into larger qubit networks. However, their weakly anharmonic spectrum leads to spectral crowding in multiqubit systems, making it challenging to implement fast, high-fidelity gates while avoiding leakage errors. To address this challenge, we use a protocol for speeding up waveforms by inducing phases to harmful transitions (SWIPHT) [S. E. Economou and E. Barnes, Phys. Rev. B 91, 161405(R) (2015)], which yields smooth, simple microwave pulses designed to suppress leakage without sacrificing gate speed through spectral selectivity. Here, we determine the parameter regimes in which SWIPHT is effective and demonstrate that in these regimes, it systematically produces two-qubit gate fidelities for cavity-coupled transmons in the range 99.6%--99.9% with gate times as fast as 23 ns. Our results are obtained from full numerical simulations that include current experimental levels of relaxation and dephasing. These high fidelities persist over a wide range of system parameters that encompass many current experimental setups and are insensitive to small parameter variations and pulse imperfections.
Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.