Abstract Multi-Penning traps are an excellent tool for high-precision tests of fundamental physics in a variety of applications, ranging from atomic mass measurements to symmetry tests. In such experiments, single ions are transferred between distinct trap regions as part of the experimental sequence, resulting in measurement dead time and heating of the ion motions. Here, we report a procedure to reduce the duration of adiabatic single-ion transport in macroscopic multi-Penning-trap stacks by using ion-transport waveforms and electronic filter predistortion. For this purpose, transport adiabaticity of a single laser-cooled 9Be+is analyzed via Doppler-broadened sideband spectra obtained by stimulated Raman spectroscopy, yielding an average heating per transport of 2.6 ± 4.0 quanta for transport times between 7 and 15 ms. Applying these techniques to current multi-Penning trap experiments could reduce ion transport times by up to three orders of magnitude. Furthermore, these results are a key requisite for implementing quantum logic spectroscopy in Penning trap experiments.
Trapped ion quantum computing based on the quantum charge coupled device (QCCD) architecture uses functional zoning and ion transport to enable high fidelity computation and all to all qubit connectivity. As trapped ion quantum processing units (QPU) scale, 90° X-junction turns account for an increasing fraction of total transport time. Frequent junction crossings, therefore, make transport speed and final phonon excitation direct determinants of quantum algorithm execution efficiency. However, complex electric fields in X-junctions complicate waveform design, making it difficult to achieve high speed and low final phonon excitation simultaneously. Here, we develop a waveform design method for low-phonon-excitation high-speed X-junction(LHX-T) transport. It integrates low barrier pseudopotential channel design using multiple radio frequency (Multi-RF), multidimensional shortcut to adiabaticity dynamics, and constrained DC voltage optimization over the entire transport sequence. This framework connects waveform design, control, and computational validation, with smooth multichannel waveforms computed rapidly through a Karush-Kuhn-Tucker(KKT) linear system. The resulting waveform transports a single
171Yb+ ion through a 90° turn in
5μs at an average speed of 14.6 m/s. Over 50 consecutive round trips, the final equivalent coherent phonon number consistently stays below 0.001, with no noticeable accumulation over time. System level evaluations at the QCCD scale show that the median duration of a single execution cycle is reduced by about
30% across various circuit types. The fraction of execution time spent on transport decreases from approximately
70% to
55%. This approach offers a means of designing fast ion transport waveforms with low phonon excitation for scalable QCCD based QPUs and provides a technical basis for efficient execution of quantum algorithms.