Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1308.1376 · Applied Physics Letters

Design and characterization of a lumped element single-ended superconducting microwave parametric amplifier with on-chip flux bias line

J. Mutus, T. White, Evan R. Jeffrey, D. Sank, R. Barends, Joerg Bochmann, Yu Chen, Z. Chen, B. Chiaro, A. Dunsworth, J. Kelly, A. Megrant, Charles Neill, P. J. J. O’Malley, P. Roushan, A. Vainsencher, J. Wenner, Irfan A. Siddiqi, Rajamani Vijay, Andrew N. Cleland, John M. Martinis

Published Sep 16, 2013• 98 citations
arXivHTMLPDF

Abstract

We demonstrate a lumped-element Josephson parametric amplifier, using a single-ended design that includes an on-chip, high-bandwidth flux bias line. The amplifier can be pumped into its region of parametric gain through either the input port or through the flux bias line. Broadband amplification is achieved at a tunable frequency ω/2π between 5 and 7 GHz with quantum-limited noise performance, a gain-bandwidth product greater than 500 MHz, and an input saturation power in excess of −120 dBm. The bias line allows fast frequency tuning of the amplifier, with variations of hundreds of MHz over time scales shorter than 10 ns.

DOI
10.1063/1.4821136

Related papers

Broadband Josephson parametric amplifier using lumped-element transmission line impedance matching architecture

Yapeng Lu, Wenqu Xu, Quan Zuo +12 more

We present a fishbone-like lumped-element artificial transmission line to overcome impedance mismatch in a reflection-type Josephson parametric amplifier between a nonlinear resonator and an external transmission line. Using this easily prepared architecture, we design and fabricate a broadband Josephson parametric amplifier, which has gain in an excess of 20 dB with a bandwidth of hundreds of MHz. Furthermore, by varying the working point of the device, the operating frequency of amplification can be tuned in a wide frequency range of 1 GHz while the amplifier operates in the mode of either three-wave mixing or four-wave mixing. Such a parametric amplifier is suitable for engineering applications of superconducting circuit quantum electrodynamics.

Applied Physics Letters•Feb 21, 2022•18 citations

Flux-pumped impedance-engineered broadband Josephson parametric amplifier

Joel Grebel, Audrey Bienfait, Étienne Dumur +7 more

Broadband quantum-limited amplifiers play a critical role in the single-shot readout of superconducting qubits, but a popular implementation, the traveling wave parametric amplifier, involves a complex design and fabrication process. Here, we present a simple design for a Josephson parametric amplifier, using a lumped element resonator comprising a superconducting quantum interference device whose useful bandwidth is enhanced with an on-chip impedance-matching circuit. We demonstrate a flux-coupling geometry that maximizes the coupling to the Josephson loop and minimizes spurious excitation of the amplifier resonant circuit. The amplifier, which operates in a flux-pumped mode, is demonstrated with a power gain of more than 20 dB over a bandwidth of about 300 MHz, where approximate noise measurements indicate quantum-limited performance. A procedure is given for optimizing the bandwidth for this kind of amplifier, using a linearized circuit simulation while minimizing non-linearities.

Applied Physics Letters•Apr 5, 2021•53 citations

Broadband lumped-element Josephson parametric amplifier with single-step lithography

T. Elo, T. S. Abhilash, M. R. Perelshtein +3 more

We present a lumped-element Josephson parametric amplifier (JPA) fabricated using a straightforward e-beam lithography process. Our strongly coupled flux-pumped JPA achieves a gain of 20 dB with a bandwidth of 95 MHz around 5 GHz, while the center frequency is tunable by more than 1 GHz, with the additional possibility for rapid tuning by varying the pump frequency alone. Analytical calculations based on the input-output theory reproduce our measurement results closely.

arXiv:1812.07621•Applied Physics Letters•Apr 15, 2019•25 citations

Broadband flux-pumped Josephson parametric amplifier with an on-chip coplanar waveguide impedance transformer

Peng Duan, Zhi-Long Jia, Chi Zhang +11 more

Abstract The rapid progress towards scalable quantum processors demands amplifiers with large bandwidths and high saturation powers. For this purpose, we present a broadband flux-pumped Josephson parametric amplifier integrated with an on-chip coplanar waveguide impedance transformer. Our device can be fabricated with simple and straightforward photo-lithography. This device experimentally achieves an operational bandwidth over 600 MHz with a gain above 15 dB, and a high saturation power with quantum-limited noise performance. In addition, the center frequency of this device can be tuned over several hundred megahertz, which in turn broadens the effective operational bandwidth to around 1 GHz.

Applied Physics Express•Mar 18, 2021•27 citations

Development and characterization of a flux-pumped lumped element Josephson parametric amplifier

Martina Esposito, Joseph Rahamim, Andrew Patterson +11 more

Josephson parametric amplification is a tool of paramount importance in circuit-QED especially for the quantum-noise-limited single-shot read-out of superconducting qubits. We developed a Josephson parametric amplifier (JPA) based on a lumped-element LC resonator, in which the inductance L is composed by a geometric inductance and an array of 4 superconducting quantum interference devices (SQUIDs). We characterized the main figures of merit of the device, obtaining a −3 dB bandwidth BW = 15 MHz for a gain G = 21 dB and a 1 dB compression point P1dB = −115 dBm. The obtained results are promising for the future use of such JPA as the first stage of amplification for single-shot readout of superconducting qubits.

EPJ Web of Conferences•Jan 1, 2019•4 citations

Broadband coplanar-waveguide-based impedance-transformed Josephson parametric amplifier

Bingcheng Qing, Long B. Nguyen, Xinyu Liu +9 more

Quantum-limited Josephson parametric amplifiers play a pivotal role in advancing the field of circuit quantum electrodynamics by enabling the fast and high-fidelity measurement of weak microwave signals. Therefore, it is necessary to develop robust parametric amplifiers with low noise, broad bandwidth, and reduced design complexity for microwave detection. However, current broadband parametric amplifiers either have degraded noise performance or rely on complex designs. Here, we present a device based on the broadband impedance-transformed Josephson parametric amplifier that integrates a hornlike coplanar waveguide transmission line, which significantly decreases the design and fabrication complexity while keeping comparable performance. The device shows an instantaneous bandwidth of 700 (200) MHz for 15 (20) dB gain with an average input saturation power of −110 dBm and near quantum-limited added noise. The operating frequency can be tuned over 1.4 GHz using an external flux bias. We further demonstrate the negligible backaction from our device on a transmon qubit. The amplification performance and simplicity of our device promise its wide adaptation in quantum metrology, quantum communication, and quantum information processing. Published by the American Physical Society 2024

arXiv:2310.17084•Physical Review Research•Feb 22, 2024•11 citations
We demonstrate a lumped-element Josephson parametric amplifier, using a single-ended design that includes an on-chip, high-bandwidth flux bias line. The amplifier can be pumped into its region of parametric gain through either the input port or through the flux bias line. Broadband amplification is achieved at a tunable frequency ω/2π between 5 and 7 GHz with quantum-limited noise performance, a gain-bandwidth product greater than 500 MHz, and an input saturation power in excess of −120 dBm. The bias line allows fast frequency tuning of the amplifier, with variations of hundreds of MHz over time scales shorter than 10 ns.
We present a fishbone-like lumped-element artificial transmission line to overcome impedance mismatch in a reflection-type Josephson parametric amplifier between a nonlinear resonator and an external transmission line. Using this easily prepared architecture, we design and fabricate a broadband Josephson parametric amplifier, which has gain in an excess of 20 dB with a bandwidth of hundreds of MHz. Furthermore, by varying the working point of the device, the operating frequency of amplification can be tuned in a wide frequency range of 1 GHz while the amplifier operates in the mode of either three-wave mixing or four-wave mixing. Such a parametric amplifier is suitable for engineering applications of superconducting circuit quantum electrodynamics.
Broadband quantum-limited amplifiers play a critical role in the single-shot readout of superconducting qubits, but a popular implementation, the traveling wave parametric amplifier, involves a complex design and fabrication process. Here, we present a simple design for a Josephson parametric amplifier, using a lumped element resonator comprising a superconducting quantum interference device whose useful bandwidth is enhanced with an on-chip impedance-matching circuit. We demonstrate a flux-coupling geometry that maximizes the coupling to the Josephson loop and minimizes spurious excitation of the amplifier resonant circuit. The amplifier, which operates in a flux-pumped mode, is demonstrated with a power gain of more than 20 dB over a bandwidth of about 300 MHz, where approximate noise measurements indicate quantum-limited performance. A procedure is given for optimizing the bandwidth for this kind of amplifier, using a linearized circuit simulation while minimizing non-linearities.
Abstract The rapid progress towards scalable quantum processors demands amplifiers with large bandwidths and high saturation powers. For this purpose, we present a broadband flux-pumped Josephson parametric amplifier integrated with an on-chip coplanar waveguide impedance transformer. Our device can be fabricated with simple and straightforward photo-lithography. This device experimentally achieves an operational bandwidth over 600 MHz with a gain above 15 dB, and a high saturation power with quantum-limited noise performance. In addition, the center frequency of this device can be tuned over several hundred megahertz, which in turn broadens the effective operational bandwidth to around 1 GHz.
Josephson parametric amplification is a tool of paramount importance in circuit-QED especially for the quantum-noise-limited single-shot read-out of superconducting qubits. We developed a Josephson parametric amplifier (JPA) based on a lumped-element LC resonator, in which the inductance L is composed by a geometric inductance and an array of 4 superconducting quantum interference devices (SQUIDs). We characterized the main figures of merit of the device, obtaining a −3 dB bandwidth BW = 15 MHz for a gain G = 21 dB and a 1 dB compression point P1dB = −115 dBm. The obtained results are promising for the future use of such JPA as the first stage of amplification for single-shot readout of superconducting qubits.
Quantum-limited Josephson parametric amplifiers play a pivotal role in advancing the field of circuit quantum electrodynamics by enabling the fast and high-fidelity measurement of weak microwave signals. Therefore, it is necessary to develop robust parametric amplifiers with low noise, broad bandwidth, and reduced design complexity for microwave detection. However, current broadband parametric amplifiers either have degraded noise performance or rely on complex designs. Here, we present a device based on the broadband impedance-transformed Josephson parametric amplifier that integrates a hornlike coplanar waveguide transmission line, which significantly decreases the design and fabrication complexity while keeping comparable performance. The device shows an instantaneous bandwidth of 700 (200) MHz for 15 (20) dB gain with an average input saturation power of −110 dBm and near quantum-limited added noise. The operating frequency can be tuned over 1.4 GHz using an external flux bias. We further demonstrate the negligible backaction from our device on a transmon qubit. The amplification performance and simplicity of our device promise its wide adaptation in quantum metrology, quantum communication, and quantum information processing. Published by the American Physical Society 2024