Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1304.7584 · Applied Physics Letters

Nb nano superconducting quantum interference devices with high spin sensitivity for operation in magnetic fields up to 0.5 T

Roman Wölbing, Joachim Nagel, Tobias Schwarz, Oliver Kieler, Th. Weimann, J. Kohlmann, Alexander B Zorin, M. Kemmler, R. Kleiner, D. Koelle

Published May 13, 2013• 48 citations
arXivHTMLPDF

Abstract

We investigate electric transport and noise properties of microstrip-type submicron direct current superconducting quantum interference devices (dc SQUIDs) based on Nb thin films and overdamped Josephson junctions with a HfTi barrier. The SQUIDs were designed for optimal spin sensitivity Sμ1/2 upon operation in intermediate magnetic fields B (tens of mT), applied perpendicular to the substrate plane. Our, so far, best SQUID can be continuously operated in fields up to B≈±50 mT with rms flux noise SΦ,w1/2≤250 nΦ0/Hz1/2 in the white noise regime and spin sensitivity Sμ1/2≤29 μB/Hz1/2. Furthermore, we demonstrate operation in B = 0.5 T with high sensitivity in flux SΦ,w1/2≈680 nΦ0/Hz1/2 and in electron spin Sμ1/2≈79 μB/Hz1/2. We discuss strategies to further improve the nanoSQUID performance.

DOI
10.1063/1.4804673

Related papers

Superconducting quantum interference devices with submicron Nb/HfTi/Nb junctions for investigation of small magnetic particles

J. Nagel, O. F. Kieler, T. Weimann +6 more

We investigated, at temperature 4.2 K, electric transport, flux noise, and resulting spin sensitivity of miniaturized Nb direct current superconducting quantum interference devices (SQUIDs) based on submicron Josephson junctions with HfTi barriers. The SQUIDs are either of the magnetometer-type or gradiometric in layout. In the white noise regime, for the best magnetometer we obtain a flux noise SΦ1/2=250nΦ0/Hz1/2, corresponding to a spin sensitivity Sμ1/2≥29μB/Hz1/2. For the gradiometer we find SΦ1/2=300nΦ0/Hz1/2 and Sμ1/2≥44μB/Hz1/2. The devices can still be optimized with respect to flux noise and coupling between a magnetic particle and the SQUID, leaving room for further improvement towards single spin resolution.

arXiv:1106.1985•Applied Physics Letters•Jul 18, 2011•61 citations

3D nanoSQUID based on tunnel nano-junctions with an energy sensitivity of 1.3 h at 4.2 K

Matthias Schmelz, Antonio Vettoliere, V. Zakosarenko +4 more

We report the performance of a reliable three-dimensional nanometer-sized Superconducting QUantum Interference Device (SQUID). The use of superconductor-isolator-superconductor Nb/Al-AlOx/Nb Josephson tunnel junctions together with small SQUID loop dimensions permits a high modulation depth of the SQUID's critical current and thus leads to very low intrinsic flux noise of the device. In particular, we present electrical characterization including detailed noise investigations. At 4.2 K, two-stage noise measurements with a SQUID as a low noise preamplifier result in a white flux noise of 51 nΦ0/Hz1/2, which is equivalent to an energy resolution of 1.3 h, with h being Planck's constant. Simulation of spin sensitivities results in about 1 μB/Hz1/2 for an electron spin positioned directly above the SQUID ring.

Applied Physics Letters•Jul 17, 2017•18 citations

Nano-superconducting quantum interference devices with continuous read out at milliKelvin temperatures

Dibyendu Hazra, John R. Kirtley, K. Hasselbach

We describe aluminum-niobium-tungsten trilayer Nano-Superconducting Quantum Interference Devices (NanoSQUIDs) that can be read out continuously down, in temperature, to at least 230 mK. They show voltage oscillations up to at least 20 mT in field. A voltage modulation of 500 μV, voltage sensitivity of 2 mV/Φ0, and white noise floor better than 5×10−5 Φ0/Hz have been obtained. Flux noise places them between conventional low impedance SQUIDs and standard nanoSQUIDs. High sensitivity and ease of implementation make this new kind of nanoSQUID attractive for magnetic detection schemes on the nanoscale and low temperature scanning SQUID microscopy.

Applied Physics Letters•Aug 26, 2013•24 citations

Temperature-dependent performance of all-NbN DC-SQUID magnetometers

Quansheng Liu, Huiwu Wang, Qiyu Zhang +3 more

Integrated NbN direct current superconducting quantum interference device (DC-SQUID) magnetometers were developed based on high-quality epitaxial NbN/AlN/NbN Josephson junctions for SQUID applications operating at high temperatures. We report the current–voltage and voltage–flux characteristics and the noise performance of the NbN DC-SQUIDs for temperatures ranging from 4.2 to 9 K. The critical current and voltage swing of the DC-SQUIDs decreased by 15% and 25%, respectively, as the temperature was increased from 4.2 to 9 K. The white flux noise of the DC-SQUID magnetometer at 1 kHz increased from 3.9 μΦ0/Hz1/2 at 4.2 K to 4.8 μΦ0/Hz1/2 at 9 K with 23% increase, corresponding to the magnetic field noise of 6.6 and 8.1 fT/Hz1/2, respectively. The results show that NbN DC-SQUIDs improve the tolerance of the operating temperatures and temperature fluctuations in SQUID applications.

Applied Physics Letters•May 29, 2017•17 citations

Investigation of all niobium nano-SQUIDs based on sub-micrometer cross-type Josephson junctions

Matthias Schmelz, Y Matsui, Ronny Stolz +6 more

We report on the development of highly sensitive SQUIDs featuring sub-micrometer loop dimensions. The integration of high quality and low capacitance SIS Nb/AlO x /Nb cross-type Josephson tunnel junctions results in white flux noise levels as low as 66 n Φ 0 Hz −1/2 , well below state-of-the-art values of their Nb-based counterparts based on constriction type junctions. Estimation of the spin sensitivity of the best SQUIDs yield S μ 1/2 < 7 μ B Hz −1/2 in the white noise region, suitable for the investigation of small spin systems. We discuss fabrication challenges, show results on the electrical characterization of devices with various pickup loops, and describe options for further improvement, which may push the sensitivity of such devices even to single spin resolution.

arXiv:1501.00958•Superconductor Science and Technology•Nov 26, 2014•27 citations

Fabrication and Characterization of SQUIDs With Nb/Nb x Si1- x /Nb Junctions

Wenhui Cao, Hua Chen, Tiantian Liang +7 more

Superconducting quantum interference devices (SQUIDs) with 3 μm × 3 μm or 4 μm × 4 μm self-shunted Nb/NbxSi1-x/Nb Josephson junctions are designed and fabricated. By adjusting the Nb content and thickness of the NbxSi1-xbarrier, the parameters of the SQUIDs can be easily tuned. The optimal parameters for the barrier are found to be a thickness of around 15 nm and 7% Nb content. The I-V curve, V-Φ curve, and noise spectrum are measured for the SQUID. The high frequency noise for the SQUID is only about several hundred nΦ0/√Hz. Another advantage for these devices is found, that it is not sensitive to the static electricity.

IEEE Transactions on Applied Superconductivity•May 18, 2018•5 citations
We investigate electric transport and noise properties of microstrip-type submicron direct current superconducting quantum interference devices (dc SQUIDs) based on Nb thin films and overdamped Josephson junctions with a HfTi barrier. The SQUIDs were designed for optimal spin sensitivity Sμ1/2 upon operation in intermediate magnetic fields B (tens of mT), applied perpendicular to the substrate plane. Our, so far, best SQUID can be continuously operated in fields up to B≈±50 mT with rms flux noise SΦ,w1/2≤250 nΦ0/Hz1/2 in the white noise regime and spin sensitivity Sμ1/2≤29 μB/Hz1/2. Furthermore, we demonstrate operation in B = 0.5 T with high sensitivity in flux SΦ,w1/2≈680 nΦ0/Hz1/2 and in electron spin Sμ1/2≈79 μB/Hz1/2. We discuss strategies to further improve the nanoSQUID performance.
We investigated, at temperature 4.2 K, electric transport, flux noise, and resulting spin sensitivity of miniaturized Nb direct current superconducting quantum interference devices (SQUIDs) based on submicron Josephson junctions with HfTi barriers. The SQUIDs are either of the magnetometer-type or gradiometric in layout. In the white noise regime, for the best magnetometer we obtain a flux noise SΦ1/2=250nΦ0/Hz1/2, corresponding to a spin sensitivity Sμ1/2≥29μB/Hz1/2. For the gradiometer we find SΦ1/2=300nΦ0/Hz1/2 and Sμ1/2≥44μB/Hz1/2. The devices can still be optimized with respect to flux noise and coupling between a magnetic particle and the SQUID, leaving room for further improvement towards single spin resolution.
We report the performance of a reliable three-dimensional nanometer-sized Superconducting QUantum Interference Device (SQUID). The use of superconductor-isolator-superconductor Nb/Al-AlOx/Nb Josephson tunnel junctions together with small SQUID loop dimensions permits a high modulation depth of the SQUID's critical current and thus leads to very low intrinsic flux noise of the device. In particular, we present electrical characterization including detailed noise investigations. At 4.2 K, two-stage noise measurements with a SQUID as a low noise preamplifier result in a white flux noise of 51 nΦ0/Hz1/2, which is equivalent to an energy resolution of 1.3 h, with h being Planck's constant. Simulation of spin sensitivities results in about 1 μB/Hz1/2 for an electron spin positioned directly above the SQUID ring.
We describe aluminum-niobium-tungsten trilayer Nano-Superconducting Quantum Interference Devices (NanoSQUIDs) that can be read out continuously down, in temperature, to at least 230 mK. They show voltage oscillations up to at least 20 mT in field. A voltage modulation of 500 μV, voltage sensitivity of 2 mV/Φ0, and white noise floor better than 5×10−5 Φ0/Hz have been obtained. Flux noise places them between conventional low impedance SQUIDs and standard nanoSQUIDs. High sensitivity and ease of implementation make this new kind of nanoSQUID attractive for magnetic detection schemes on the nanoscale and low temperature scanning SQUID microscopy.
Integrated NbN direct current superconducting quantum interference device (DC-SQUID) magnetometers were developed based on high-quality epitaxial NbN/AlN/NbN Josephson junctions for SQUID applications operating at high temperatures. We report the current–voltage and voltage–flux characteristics and the noise performance of the NbN DC-SQUIDs for temperatures ranging from 4.2 to 9 K. The critical current and voltage swing of the DC-SQUIDs decreased by 15% and 25%, respectively, as the temperature was increased from 4.2 to 9 K. The white flux noise of the DC-SQUID magnetometer at 1 kHz increased from 3.9 μΦ0/Hz1/2 at 4.2 K to 4.8 μΦ0/Hz1/2 at 9 K with 23% increase, corresponding to the magnetic field noise of 6.6 and 8.1 fT/Hz1/2, respectively. The results show that NbN DC-SQUIDs improve the tolerance of the operating temperatures and temperature fluctuations in SQUID applications.
We report on the development of highly sensitive SQUIDs featuring sub-micrometer loop dimensions. The integration of high quality and low capacitance SIS Nb/AlO x /Nb cross-type Josephson tunnel junctions results in white flux noise levels as low as 66 n Φ 0 Hz −1/2 , well below state-of-the-art values of their Nb-based counterparts based on constriction type junctions. Estimation of the spin sensitivity of the best SQUIDs yield S μ 1/2 < 7 μ B Hz −1/2 in the white noise region, suitable for the investigation of small spin systems. We discuss fabrication challenges, show results on the electrical characterization of devices with various pickup loops, and describe options for further improvement, which may push the sensitivity of such devices even to single spin resolution.
Superconducting quantum interference devices (SQUIDs) with 3 μm × 3 μm or 4 μm × 4 μm self-shunted Nb/NbxSi1-x/Nb Josephson junctions are designed and fabricated. By adjusting the Nb content and thickness of the NbxSi1-xbarrier, the parameters of the SQUIDs can be easily tuned. The optimal parameters for the barrier are found to be a thickness of around 15 nm and 7% Nb content. The I-V curve, V-Φ curve, and noise spectrum are measured for the SQUID. The high frequency noise for the SQUID is only about several hundred nΦ0/√Hz. Another advantage for these devices is found, that it is not sensitive to the static electricity.