We present a general protocol for stabilizer measurements and pumping in a system of N superconducting qubits. We assume always-on, equal dispersive couplings to a single mode of a high-Q microwave resonator in the ultra-strong dispersive limit where the dispersive shifts largely exceed the spectral linewidth. In this limit, we show how to map the two eigenvalues of an arbitrary weight M < N Pauli operator, onto two quasi-orthogonal coherent states of the cavity. Together with a fast cavity readout, this enables the efficient measurement of stabilizer operators.
We present a general protocol for stabilizer measurements and pumping in a system of N superconducting qubits. We assume always-on, equal dispersive couplings to a single mode of a high-Q microwave resonator in the ultra-strong dispersive limit where the dispersive shifts largely exceed the spectral linewidth. In this limit, we show how to map the two eigenvalues of an arbitrary weight M < N Pauli operator, onto two quasi-orthogonal coherent states of the cavity. Together with a fast cavity readout, this enables the efficient measurement of stabilizer operators.
Eigenstate-preserving multi-qubit parity measurements lie at the heart of stabilizer quantum error correction, which is a promising approach to mitigate the problem of decoherence in quantum computers. In this work we explore a high-fidelity, eigenstate-preserving parity readout for superconducting qubits dispersively coupled to a microwave resonator, where the parity bit is encoded in the amplitude of a coherent state of the resonator. Detecting photons emitted by the resonator via a current biased Josephson junction yields information about the parity bit. We analyze theoretically the measurement back action in the limit of a strongly coupled fast detector and show that in general such a parity measurement, while approximately quantum nondemolition is not eigenstate preserving. To remediate this shortcoming we propose a simple dynamical decoupling technique during photon detection, which greatly reduces decoherence within a given parity subspace. Furthermore, by applying a sequence of fast displacement operations interleaved with the dynamical decoupling pulses, the natural bias of this binary detector can be efficiently suppressed. Finally, we introduce the concept of a heralded parity measurement, where a detector click guarantees successful multi-qubit parity detection even for finite detection efficiency.
Designing quantum systems with the measurement speed and accuracy needed for quantum error correction using superconducting qubits requires iterative design and testing informed by accurate models and characterization tools. We introduce a single protocol, with few prerequisite calibrations, to measure the dispersive shift, resonator linewidth, and drive power used in the dispersive readout of superconducting qubits. We find that the resonator linewidth is poorly controlled, with a factor of 2 variation between the maximum and minimum measured values, and this variation is likely to require focused attention in future quantum error correction experiments. We also introduce a protocol for measuring the efficiency of the readout system using the same power levels as are used in typical qubit readout, and without the need to measure the qubit dephasing. We routinely run these protocols on chips with tens of qubits to a hundred qubits, driven by automation software with little human interaction. Using the extracted system parameters, we find that a model based on these parameters predicts the readout signal-to-noise ratio to within 10% over a device with 54 qubits.
The performance of a wide range of quantum computing algorithms and protocols depends critically on the fidelity and speed of the employed qubit readout. Examples include gate sequences benefiting from midcircuit real-time measurement-based feedback, such as qubit initialization, entanglement generation, teleportation, and, perhaps most importantly, quantum error correction. A prominent and widely used readout approach is based on the dispersive interaction of a superconducting qubit strongly coupled to a large-bandwidth readout resonator, frequently combined with a dedicated or shared Purcell filter protecting qubits from decay. By dynamically reducing the qubit-resonator detuning and thus increasing the dispersive shift, we demonstrate a beyond-state-of-the-art two-state-readout error of only 0.25% in 100-ns integration time. Maintaining low-readout-drive strength, we nearly quadruple the signal-to-noise ratio of the readout by doubling the readout-mode line width, which we quantify by considering the hybridization of the readout resonator and its dedicated Purcell filter. We find excellent agreement between our experimental data and our theoretical model. The presented results are expected to further boost the performance of new and existing algorithms and protocols critically depending on high-fidelity fast midcircuit measurements. Published by the American Physical Society 2024
We analyze a single-shot readout for superconducting qubits via the controlled catch, dispersion, and release of a microwave field. A tunable coupler is used to decouple the microwave resonator from the transmission line during the dispersive qubit-resonator interaction, thus circumventing damping from the Purcell effect. We show that, if the qubit frequency tuning is sufficiently adiabatic, a fast high-fidelity qubit readout is possible, even in the strongly nonlinear dispersive regime. Interestingly, the Jaynes-Cummings nonlinearity leads to the quadrature squeezing of the resonator field below the standard quantum limit, resulting in a significant decrease of the measurement error.
Dispersive readout, the current standard for measuring superconducting qubits, relies on relatively easy to engineer, static transverse coupling between a qubit and a detuned cavity mode. However, this method requires circuit design trade-offs between qubit-cavity coupling, cavity-feedline coupling, detuning, and the resultant decoherence introduced by the cavity mode. Additionally, the criteria for performing quantum nondemolition measurements, including reduced cavity photon numbers, further limits speed and fidelity. In this work, we introduce a circuit with pulse-tunable qubit-cavity and cavity-feedline couplings so that the entire qubit-measurement process can be fully optimized. Here, the core measurement process resembles a quantum gate operation between the qubit and the cavity, with the cavity acting like an ancilla, storing the qubit-state information. To fully explore time-dependent effects of the full qubit-cavity dynamics, we go beyond the rotating-wave, Jaynes-Cummings, or dispersive approximations, to develop a pulsed-measurement protocol. In addition, we propose a realistic circuit architecture that can provide a very fast, high-fidelity, QND measurement with near-unit efficiency.
We describe an approach to the high-fidelity measurement of a superconducting qubit using an on-chip microwave photon counter.The protocol relies on the transient response of a dispersively coupled measurement resonator to map the state of the qubit to "bright" and "dark" cavity pointer states that are characterized by a large differential photon occupation.Following this mapping, we photodetect the resonator using the Josephson photomultiplier, which transitions between classically distinguishable flux states when cavity photon occupation exceeds a certain threshold.Our technique provides access to the binary outcome of projective quantum measurement at the millikelvin stage without the need for quantumlimited preamplification and thresholding at room temperature.We achieve raw single-shot measurement fidelity in excess of 98% across multiple samples using this approach in total measurement times under 500 ns.In addition, we show that the backaction and crosstalk associated with our measurement protocol can be mitigated by exploiting the intrinsic damping of the Josephson photomultiplier itself.