Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1203.1079 · Applied Physics Letters

Timing performance of 30-nm-wide superconducting nanowire avalanche photodetectors

Faraz Najafi, Francesco Marsili, Eric A. Dauler, R. J. Molnar, Karl K. Berggren

Published Apr 9, 2012• 40 citations
arXivHTMLPDF

Abstract

We investigated the timing jitter of superconducting nanowire avalanche photodetectors (SNAPs, also referred to as cascade-switching superconducting single-photon detectors) based on 30-nm-wide nanowires. At bias currents (IB) near the switching current, SNAPs showed sub-35-ps FWHM Gaussian jitter similar to standard 100-nm-wide superconducting nanowire single-photon detectors. At lower values of IB, the instrument response function (IRF) of the detectors became wider, more asymmetric, and shifted to longer time delays. We could reproduce the experimentally observed IRF time-shift in simulations based on an electrothermal model and explain the effect with a simple physical picture.

DOI
10.1063/1.3703588

Related papers

Afterpulsing and instability in superconducting nanowire avalanche photodetectors

Francesco Marsili, Faraz Najafi, Eric A. Dauler +2 more

We investigated the reset time of superconducting nanowire avalanche photodetectors (SNAPs) based on 30 nm wide nanowires. We studied the dependence of the reset time of SNAPs on the device inductance and discovered that SNAPs can provide a speed-up relative to superconducting nanowire single-photon detectors with the same area but with some limitations: (1) Reducing the series inductance of SNAPs (necessary for the avalanche formation) could result in the detectors operating in an unstable regime, (2) a trade-off exists between maximizing the bias current margin and minimizing the reset time of SNAPs, and (3) reducing the reset time of SNAPs below ∼1 ns resulted in afterpulsing.

arXiv:1203.0065•Applied Physics Letters•Mar 12, 2012•56 citations

Stable, high-performance operation of a fiber-coupled superconducting nanowire avalanche photon detector

Shigehito Miki, Masahiro Yabuno, Taro Yamashita +1 more

Recent progress in the development of superconducting nanowire single photon detectors (SSPD or SNSPD) has delivered excellent performance, and has had a great impact on a range of research fields. Significant efforts are being made to further improve the technology, and a primary concern remains to resolve the trade-offs between detection efficiency (DE), timing jitter, and response speed. We present a stable and high-performance fiber-coupled niobium titanium nitride superconducting nanowire avalanche photon detector (SNAP) that resolves these trade-offs. Autocorrelation function measurement revealed an afterpulse-free operation in serially connected two SNAP (SC-2SNAP), even in the absence of a choke inductor, achieving a 7.65 times faster response speed than standard SSPDs. The SC-2SNAP device showed a system detection efficiency (SDE) of 81.0% with wide bias current margin, a dark count rate of 6.8 counts/s, and full width at half maximum timing jitter of 68 ps, operating in a practical Gifford-McMahon cryocooler system.

arXiv:1701.07247•Optics Express•Mar 15, 2017•75 citations

Large-Area Superconducting Nanowire Single-Photon Detector With Double-Stage Avalanche Structure

Risheng Cheng, Menno Poot, Xiang Guo +2 more

We propose a novel design of superconducting nanowire avalanche photodetectors (SNAPs), which combines the advantages of multistage avalanche SNAPs to lower the avalanche current IAVand that of series-SNAPs to reduce the reset time. As proof of principle, we fabricated 800 devices with large detection area (15 μm × 15 μm) and five different designs on a single silicon chip for comparison, which include standard SNSPDs, series-3-SNAPs, and our modified series-SNAPs with double-stage avalanche structure 2*2-SNAPs, 2*3-SNAPs, and 3*3-SNAPs. The former three types of the detectors demonstrate fully saturated device detection efficiencies of ~20% while the latter two types are latching at larger bias currents. In addition, the IAVof 2*2-SNAPs is only 64% of the switching current ISWthat is lower than series-3-SNAPs (74%) and well below that of 4-SNAPs (84%) reported elsewhere. We also measure that the exponential decay times of the detectors are proportional to 1/ n2due to the lack of external choke inductors. In particular, the decay time of 3*3-SNAPs is only 0.89 ns compared to the standard SNSPDs' 63.2 ns, showing the potential to attain GHz counting rates.

arXiv:1612.05822•IEEE Transactions on Applied Superconductivity•Dec 21, 2016•11 citations

Timing jitter of cascade switch superconducting nanowire single photon detectors

Mikkel Ejrnaes, A. Casaburi, Roberto Cristiano +9 more

We investigate the timing jitter in parallel superconducting NbN-nanowire single photon detectors based on a cascade switch mechanism. The measured timing jitter is asymmetric and has an oscillatory dependence on bias current. At the highest bias current the full width at half maximum was 1.5 times larger than an on-chip reference meander NbN nanowire. A physical model of the dynamics occurring during cascade switch is developed, that quantitatively accounts for our observations as a consequence of different nanowire critical currents within the detector.

Applied Physics Letters•Sep 28, 2009•23 citations

Fractal superconducting nanowire avalanche photodetector at 1550 nm with 60% system detection efficiency and 1.05 polarization sensitivity

Yun Meng, Kai Zou, Nan Hu +6 more

Superconducting nanowire (nanostrip) single-photon detectors (SNSPDs) have shown unprecedented detection efficiency and timing properties, but simultaneously achieving polarization-insensitive high detection efficiency, low dark-count rate (DCR), fast speed, and low timing jitter remains a challenge. Here we report on our design, fabrication, and characterization of a cascaded superconducting avalanche photodetector composed of 40 nm wide NbTiN nanowires patterned into fractal curves. At the base temperature of 2.7 K, the device exhibits 60±3% system detection efficiency at the wavelength of 1550 nm, 1.05 polarization sensitivity, 220 cps DCR, 4 ns recovery time, and 45 ps timing jitter. This Letter not only demonstrates these combined properties on a single detector that was unobtainable previously, but also shows that that current-crowding effect remarkably permits decent internal detection efficiency. These counter-intuitive results expand the understanding pertaining to the device physics of SNSPDs.

Optics Letters•Dec 12, 2019•23 citations

Enhanced-performance superconducting nanowire avalanche photodetector with staggered bends

Xu Zhao, Ling-Dong Kong, Jia-Min Xiong +4 more

Emerging quantum technologies and weak-light applications demand photon detectors with a simultaneously high counting rate and near-unity efficiency. Superconducting nanowire single-photon detectors can achieve >90% system detection efficiency, but maintaining this efficiency at high counting rates remains challenging. Although parallel-configured superconducting nanowire avalanche photodetectors (SNAPs) reduce the recovery time, their designs intensify the current crowding effects at bends, leading to persistent challenges in achieving high system detection efficiency. We developed an optimized bend structure for meandered parallel nanowires called staggered bends, which increased the switching current by 11.3% in the 2-SNAPs. At 1064 nm, the optimized 2-SNAP and 3-SNAP with staggered bends achieved system detection efficiencies of 96.6% and 98.1%, respectively. Meanwhile, these devices maintain 90% system detection efficiency while achieving counting rates of 3.1 MHz and 10.3 MHz. This study establishes a practical framework for SNAPs with demonstrated performance metrics that could enable advancements in the frontiers of quantum information.

Superconductivity•Jul 8, 2025•0 citations
We investigated the timing jitter of superconducting nanowire avalanche photodetectors (SNAPs, also referred to as cascade-switching superconducting single-photon detectors) based on 30-nm-wide nanowires. At bias currents (IB) near the switching current, SNAPs showed sub-35-ps FWHM Gaussian jitter similar to standard 100-nm-wide superconducting nanowire single-photon detectors. At lower values of IB, the instrument response function (IRF) of the detectors became wider, more asymmetric, and shifted to longer time delays. We could reproduce the experimentally observed IRF time-shift in simulations based on an electrothermal model and explain the effect with a simple physical picture.
We investigated the reset time of superconducting nanowire avalanche photodetectors (SNAPs) based on 30 nm wide nanowires. We studied the dependence of the reset time of SNAPs on the device inductance and discovered that SNAPs can provide a speed-up relative to superconducting nanowire single-photon detectors with the same area but with some limitations: (1) Reducing the series inductance of SNAPs (necessary for the avalanche formation) could result in the detectors operating in an unstable regime, (2) a trade-off exists between maximizing the bias current margin and minimizing the reset time of SNAPs, and (3) reducing the reset time of SNAPs below ∼1 ns resulted in afterpulsing.
Recent progress in the development of superconducting nanowire single photon detectors (SSPD or SNSPD) has delivered excellent performance, and has had a great impact on a range of research fields. Significant efforts are being made to further improve the technology, and a primary concern remains to resolve the trade-offs between detection efficiency (DE), timing jitter, and response speed. We present a stable and high-performance fiber-coupled niobium titanium nitride superconducting nanowire avalanche photon detector (SNAP) that resolves these trade-offs. Autocorrelation function measurement revealed an afterpulse-free operation in serially connected two SNAP (SC-2SNAP), even in the absence of a choke inductor, achieving a 7.65 times faster response speed than standard SSPDs. The SC-2SNAP device showed a system detection efficiency (SDE) of 81.0% with wide bias current margin, a dark count rate of 6.8 counts/s, and full width at half maximum timing jitter of 68 ps, operating in a practical Gifford-McMahon cryocooler system.
We propose a novel design of superconducting nanowire avalanche photodetectors (SNAPs), which combines the advantages of multistage avalanche SNAPs to lower the avalanche current IAVand that of series-SNAPs to reduce the reset time. As proof of principle, we fabricated 800 devices with large detection area (15 μm × 15 μm) and five different designs on a single silicon chip for comparison, which include standard SNSPDs, series-3-SNAPs, and our modified series-SNAPs with double-stage avalanche structure 2*2-SNAPs, 2*3-SNAPs, and 3*3-SNAPs. The former three types of the detectors demonstrate fully saturated device detection efficiencies of ~20% while the latter two types are latching at larger bias currents. In addition, the IAVof 2*2-SNAPs is only 64% of the switching current ISWthat is lower than series-3-SNAPs (74%) and well below that of 4-SNAPs (84%) reported elsewhere. We also measure that the exponential decay times of the detectors are proportional to 1/ n2due to the lack of external choke inductors. In particular, the decay time of 3*3-SNAPs is only 0.89 ns compared to the standard SNSPDs' 63.2 ns, showing the potential to attain GHz counting rates.
We investigate the timing jitter in parallel superconducting NbN-nanowire single photon detectors based on a cascade switch mechanism. The measured timing jitter is asymmetric and has an oscillatory dependence on bias current. At the highest bias current the full width at half maximum was 1.5 times larger than an on-chip reference meander NbN nanowire. A physical model of the dynamics occurring during cascade switch is developed, that quantitatively accounts for our observations as a consequence of different nanowire critical currents within the detector.
Superconducting nanowire (nanostrip) single-photon detectors (SNSPDs) have shown unprecedented detection efficiency and timing properties, but simultaneously achieving polarization-insensitive high detection efficiency, low dark-count rate (DCR), fast speed, and low timing jitter remains a challenge. Here we report on our design, fabrication, and characterization of a cascaded superconducting avalanche photodetector composed of 40 nm wide NbTiN nanowires patterned into fractal curves. At the base temperature of 2.7 K, the device exhibits 60±3% system detection efficiency at the wavelength of 1550 nm, 1.05 polarization sensitivity, 220 cps DCR, 4 ns recovery time, and 45 ps timing jitter. This Letter not only demonstrates these combined properties on a single detector that was unobtainable previously, but also shows that that current-crowding effect remarkably permits decent internal detection efficiency. These counter-intuitive results expand the understanding pertaining to the device physics of SNSPDs.
Emerging quantum technologies and weak-light applications demand photon detectors with a simultaneously high counting rate and near-unity efficiency. Superconducting nanowire single-photon detectors can achieve >90% system detection efficiency, but maintaining this efficiency at high counting rates remains challenging. Although parallel-configured superconducting nanowire avalanche photodetectors (SNAPs) reduce the recovery time, their designs intensify the current crowding effects at bends, leading to persistent challenges in achieving high system detection efficiency. We developed an optimized bend structure for meandered parallel nanowires called staggered bends, which increased the switching current by 11.3% in the 2-SNAPs. At 1064 nm, the optimized 2-SNAP and 3-SNAP with staggered bends achieved system detection efficiencies of 96.6% and 98.1%, respectively. Meanwhile, these devices maintain 90% system detection efficiency while achieving counting rates of 3.1 MHz and 10.3 MHz. This study establishes a practical framework for SNAPs with demonstrated performance metrics that could enable advancements in the frontiers of quantum information.