This is an introduction to software methods of quantum fault tolerance. Broadly speaking, these methods describe strategies for using the noisy hardware components of a quantum computer to perform computations while continually monitoring and actively correcting the hardware faults. We discuss parallels and differences with similar methods for ordinary digital computation, we discuss some of the noise models used in designing and analyzing noisy quantum circuits, and we sketch the logic of some of the central results in this area of research.
This is an introduction to software methods of quantum fault tolerance. Broadly speaking, these methods describe strategies for using the noisy hardware components of a quantum computer to perform computations while continually monitoring and actively correcting the hardware faults. We discuss parallels and differences with similar methods for ordinary digital computation, we discuss some of the noise models used in designing and analyzing noisy quantum circuits, and we sketch the logic of some of the central results in this area of research.
One of the applications of quantum error correction is protecting quantum computers from noise. Certainly, there is nothing particularly quantum mechanical in the idea of protecting information by encoding it. Even ordinary digital computers use various fault tolerance methods at the software level to correct errors during the storage or the transmission of information; e.g., the integrity of the bits stored in hard disks is verified by using parity checks (checksums). In addition, for critical computing systems such as those inside airplanes or nuclear reactors, software fault tolerance methods are also applied during the processing of information; e.g., airplane control computers compare the results from multiple parallel processors to detect faults. In general, however, the hardware of modern computers is remarkably robust to noise, so that for most applications the processing of information can be executed with high reliability without using software error correction. In contrast to the ease and robustness with which classical information can be processed, the processing of quantum information appears at present to be much more challenging. Although constructing reliable quantum computing hardware is certainly a daunting task, we have nevertheless strong hopes that large-scale quantum computers, able to implement useful long computations, can in fact be realized. This optimism is founded on methods of quantum fault tolerance , which show that scalable quantum computation is, in principle, possible against a variety of noise processes.
Quantum computing is entering a transitional regime between noisy intermediate-scale quantum (NISQ) processing and early fault-tolerant quantum computation (FTQC), in which increasingly capable hardware is beginning to support repeated syndrome measurements, partial error correction, and logical-qubit operations, while residual physical and logical errors remain non-negligible. In this regime, error suppression, error mitigation, and quantum error correction are increasingly better viewed as complementary layers of a unified error-reduction strategy rather than as separate approaches, with each acting at a different stage of the quantum computation to improve simulation reliability. Thus, in this review, we provide a practical and forward-looking overview of the principal hardware error sources and the corresponding error suppression and mitigation methods for reducing their impact across the current NISQ-FTQC transition. We discuss hardware-aware circuit design, coherent-error suppression, readout mitigation, noise extrapolation, classical inference, and software-supported workflows, with particular emphasis on their implementation on actual quantum processors. We further examine how error mitigation techniques can be adapted to encoded and logical-qubit settings so that they can operate alongside quantum error correction to suppress residual logical errors and improve the accuracy of computation in the early fault-tolerant regime.
Quantum computing is an emerging technology that has the potential to change the perspectives and applications of computing in general. A wide range of applications are enabled: from faster algorithmic solutions of classically still difficult problems to theoretically more secure communication protocols. A quantum computer uses the quantum mechanical effects of particles or particle-like systems, and a major similarity between quantum and classical computers consists of both being abstracted as information processing machines. Whereas a classical computer operates on classical digital information, the quantum computer processes quantum information, which shares similarities with analog signals. One of the central differences between the two types of information is that classical information is more fault-tolerant when compared to its quantum counterpart. Faults are the result of the quantum systems being interfered by external noise, but during the last decades quantum error correction codes (QECC) were proposed as methods to reduce the effect of noise. Reliable quantum circuits are the result of designing circuits that operate directly on encoded quantum information, but the circuit’s reliability is also increased by supplemental redundancies, such as sub-circuit repetitions. Reliable quantum circuits have not been widely used, and one of the major obstacles is their vast associated resource overhead, but recent quantum computing architectures show promising scalabilities. Consequently the number of particles used for computing can be more easily increased, and that the classical control hardware (inherent for quantum computation) is also more reliable. Reliable quantum circuits haev been investigated for almost as long as general quantum computing, but their limited adoption (until recently) has not generated enough interest into their systematic design. The continuously increasing practical relevance of reliability motivates the present thesis to investigate some of the first answers to questions related to the background and the methods forming a reliable quantum circuit design stack. The specifics of quantum circuits are analysed from two perspectives: their probabilistic behaviour and their topological properties when a particular class of QECCs are used. The quantum phenomena, such as entanglement and superposition, are the computational resources used for designing quantum circuits. The discrete nature of classical information is missing for quantum information. An arbitrary quantum system can be in an infinite number of states, which are linear combinations of an exponential number of basis states. Any nontrivial linear combination of more than one basis states is called a state superposition. The effect of superpositions becomes evident when the state of the system is inferred (measured), as measurements are probabilistic with respect to their output: a nontrivial state superposition will collapse to one of the component basis states, and the measurement result is known exactly only after the measurement. A quantum system is, in general, composed from identical subsystems, meaning that a quantum computer (the complete system) operates on multiple similar particles (subsystems). Entanglement expresses the impossibility of separating the state of the subsystems from the state of the complete system: the nontrivial interactions between the subsystems result into a single indivisible state. Entanglement is an additional source of probabilistic behaviour: by measuring the state of a subsystem, the states of the unmeasured subsystems will probabilistically collapse to states from a well defined set of possible states. Superposition and entanglement are the building blocks of quantum information teleportation protocols, which in turn are used in state-of-the-art fault-tolerant quantum computing architectures. Information teleportation implies that the state of a subsystem is moved to a second subsystem without copying any information during the process. The probabilistic approach towards the design of quantum circuits is initiated by the extension of classical test and diagnosis methods. Quantum circuits are modelled similarly to classical circuits by defining gate-lists, and missing quantum gates are modelled by the single missing gate fault. The probabilistic approaches towards quantum circuits are facilitated by comparing these to stochastic circuits, which are a particular type of classical digital circuits. Stochastic circuits can be considered an emulation of analogue computing using digital components. A first proposed design method, based on the direct comparison, is the simulation of quantum circuits using stochastic circuits by mapping each quantum gate to a stochastic computing sub-circuit. The resulting stochastic circuit is compiled and simulated on FPGAs. The obtained results are encouraging and illustrate the capabilities of the proposed simulation technique. However, the exponential number of possible quantum basis states was translated into an exponential number of stochastic computing elements. A second contribution of the thesis is the proposal of test and diagnosis methods for both stochastic and quantum circuits. Existing verification (tomographic) methods of quantum circuits were targeting the reconstruction of the gate-lists. The repeated execution of the quantum circuit was followed by different but specific measurement at the circuit outputs. The similarities between stochastic and quantum circuits motivated the proposal of test and diagnosis methods that use a restricted set of measurement types, which minimise the number of circuit executions. The obtained simulation results show that the proposed validation methods improve the feasibility of quantum circuit tomography for small and medium size circuits. A third contribution of the thesis is the algorithmic formalisation of a problem encountered in teleportation-based quantum computing architectures. The teleportation results are probabilistic and require corrections represented as quantum gates from a particular set. However, there are known commutation properties of these gates with the gates used in the circuit. The corrections are not applied as dynamic gate insertions (during the circuit’s execution) into the gate-lists, but their effect is tracked through the circuit, and the corrections are applied only at circuit outputs. The simulation results show that the algorithmic solution is applicable for very large quantum circuits. Topological quantum computing (TQC) is based on a class of fault-tolerant quantum circuits that use the surface code as the underlying QECC. Quantum information is encoded in lattice-like structures and error protection is enabled by the topological properties of the lattice. The 3D structure of the lattice allows TQC computations to be visualised similarly to knot diagrams. Logical information is abstracted as strands and strand interactions (braids) represent logical quantum gates. Therefore, TQC circuits are abstracted using a geometrical description, which allows circuit input-output transformations (correlations) to be represented as geometric sub-structures. TQC design methods were not investigated prior to this work, and the thesis introduces the topological computational model by first analysing the necessary concepts. The proposed TQC design stack follows a top-down approach: an arbitrary quantum circuit is decomposed into the TQC supported gate set; the resulting circuit is mapped to a lattice of appropriate dimensions; relevant resulting topological properties are extracted and expressed using graphs and Boolean formulas. Both circuit representations are novel and applicable to TQC circuit synthesis and validation. Moreover, the Boolean formalism is broadened into a formal mechanism for proving circuit correctness. The thesis introduces TQC circuit synthesis, which is based on a novel logical gate geometric description, whose formal correctness is demonstrated. Two synthesis methods are designed, and both use a general planar representation of the circuit. Initial simulation results demonstrate the practicality and performance of the methods. An additional group of proposed design methods solves the problem of automatic correlation construction. The methods use validity criteria which were introduced and analysed beforehand in the thesis. Input-output correlations existing in the circuit are inferred using both the graph and the Boolean representation. The thesis extends the TQC state-of-the-art by recognising the importance of correlations in the validation process: correlation construction is used as a sub-routine for TQC circuit validation. The presented cross-layer validation procedure is useful when investigating both the QECC and the circuit, while a second proposed method is QECC-independent. Both methods are scalable and applicable even to very large circuits. The thesis completes with the analysis of TQC circuit identities, where the developed Boolean formalism is used. The proofs of former known circuit identities were either missing or complex, and the presented approach reduces the length of the proofs and represents a first step towards standardising them. A new identity is developed and detailed during the process of illustrating the known circuit identities. Reliable quantum circuits are a necessity for quantum computing to become reality, and specialised design methods are required to support the quest for scalable quantum computers. This thesis used a twofold approach towards this target: firstly by focusing on the probabilistic behaviour of quantum circuits, and secondly by considering the requirements of a promising quantum computing architecture, namely TQC. Both approaches resulted in a set of design methods enabling the investigation of reliable quantum circuits. The thesis contributes with the proposal of a new quantum simulation technique, no
This thesis is concerned with certain theoretical problems that arise naturally in the context of fault-tolerant quantum computation. Fault-tolerance can be defined as the art of building reliable devices from unreliable components, and is of particular importance for quantum computers that aim to precisely control the dynamics of extremely sensitive quantum systems. A model of quantum computation is a specification of the basic building blocks by which a quantum computation is implemented. The best known model is the quantum circuit model, where computations are implemented by means of unitary quantum gates that are applied to two-level quantum systems known as qubits. In a physical implementation of a quantum circuit, the gates and qubits will inevitably be affected by noise. Fault-tolerant quantum circuits are designed to be resilient against the effects of this noise, provided that it is not too strong. Fault-tolerance in the quantum circuit model is well developed thanks to the theory of quantum error-correcting codes. These codes allow for the correction of small numbers of errors introduced by a variety of noise processes. In a fault-tolerant quantum circuit, qubits are replaced with encoded qubits, and quantum gates with encoded gates that are immediately followed by special quantum circuits for error correction. Provided the rate at which errors occur is below a constant threshold value, the accumulation of errors can be checked so that the correct output of the computation correctly determined. The threshold acts as both a measure of how good the design of a quantum circuit is, and also as a target for experimenters aiming to implement quantum circuits. Much current research in quantum computation is aimed at designing quantum circuits that increase the noise threshold, hopefully to the point where it becomes within the reach of experimenters. A fault-tolerant encoded quantum gate must limit the propagation of errors so that the code’s corrective capabilities are not overwhelmed. It is not so easy to design encoded gates that satisfy this property, and to date only a finite handful of such gates are known. In a faulttolerant quantum circuit, all quantum gates must be decomposed or compiled in terms of those that may be implemented fault-tolerantly. In the first part of this thesis, we present two results that may be applied to this problem of gate compilation. The first is a generic method based on the Solovay-Kitaev theorem that may be applied to all quantum gates, but is most effective for those that act on single qubits. We present the Solovay-Kitaev theorem in its simples known form as an algorithm, together with novel constructions that can be used to implement it. Following this we give a two specialized methods for two-qubit gate decomposition, based on the Cartan decomposition of the Lie group SU(4). The cluster-state model of computation is an alternative to the quantum circuit model, and makes use of quantum measurements and highly entangled cluster-states to implement a quantum computation. The fault-tolerant techniques developed for quantum circuits are not immediately applicable in this model, so in order for it to be a realistic candidate for performing computations we prove that such techniques are possible. In the second part of the thesis we prove that constant fault-tolerance thresholds may be achieved in the cluster-state model, and in particular in an adaption to an optical implementation. Following this we design a complete error correction scheme for optical cluster-state computation, and numerically determine the threshold of this model in the face of the dominant noise models likely to affect such an implementation.
Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.
This thesis is concerned with fault-tolerant quantum information processing using quantum error-correcting codes. It contains two major pieces of work. The first is a study of coherent noise in the context of stabilizer error-correcting codes. The second is a proposed scheme for a universal set of fault-tolerant logical gates in a particular code family built out of the 3D toric code. Chapter 1 provides an introduction to quantum computation and fault tolerance. Many basic concepts in error-correcting codes are defined. Special attention is paid to the set of code properties that are most likely to determine how easily a given fault-tolerant scheme might be implemented on a physical device. These include the fault-tolerant noise threshold and the overhead. In Chapters 2 and 3 we study the effectiveness of quantum error correction against coherent noise. Coherent errors (for example, unitary noise) can interfere constructively, so that in some cases the average infidelity of a quantum circuit subjected to coherent errors may increase quadratically with the circuit size; in contrast, when errors are incoherent (for example, depolarizing noise), the average infidelity increases at worst linearly with circuit size. We consider the performance of quantum stabilizer codes against a noise model in which a unitary rotation is applied to each qubit, where the axes and angles of rotation are nearly the same for all qubits. In Chapter 2 we introduce coherent noise and incoherent noise and a number of methods that are useful for the study of coherent noise. We study the repetition code as a basic example, and we also study a correlated noise model. In Chapter 3 we show that for the toric code subject to such independent coherent noise, and for minimal-weight decoding, the logical channel after error correction becomes increasingly incoherent as the length of the code increases, provided the noise strength decays inversely with the code distance. A similar conclusion holds for weakly correlated coherent noise. Our methods can also be used for analyzing the performance of other codes and fault-tolerant protocols against coherent noise. However, our result does not show that the coherence of the logical channel is suppressed in the more physically relevant case where the noise strength is held constant as the code block grows, and we recount the difficulties that prevented us from extending the result to that case. Nevertheless our work supports the idea that fault-tolerant quantum computing schemes will work effectively against coherent noise, providing encouraging news for quantum hardware builders who worry about the damaging effects of control errors and coherent interactions with the environment. Chapter 4 is connected to another aspect of fault tolerance, fault-tolerant logical gates. The toric code is a promising candidate for fault-tolerant quantum computation because of its high threshold and low-weight stabilizers. A universal gate set in the toric code generally requires magic state distillation, which can incur a significant qubit overhead. In this work we construct an error-correcting code in three dimensions based on the toric code that features a fault-tolerant T gate with no magic state distillation required. We further describe a subsystem version of our code which supports a universal set of fault-tolerant gates. This code can be converted into the stabilizer version using gauge-fixing. We also argue that our code can be converted to a (2+1)-D protocol, where a 2D lattice undergoes a measurement-based protocol over time. In this way, a fault-tolerant logical T gate can be realized in a 2D toric code structure.