We employ simultaneous shaping of in-phase and out-of-phase resonant microwave drives to reduce single-qubit gate errors arising from the weak anharmonicity of transmon superconducting artificial atoms. To reduce the effect of higher levels present in the transmon spectrum, we apply Gaussian and derivative-of-Gaussian envelopes to the in-phase and out-of-phase quadratures, respectively, and optimize over their relative amplitude. Using randomized benchmarking, we obtain a minimum average error per gate of $0.007\ifmmode\pm\else\textpm\fi{}0.005$ using 4-ns-wide pulses, which is limited by decoherence. This simple optimization technique works for multiple transmons coupled to a single microwave resonator in a quantum bus architecture.
We employ simultaneous shaping of in-phase and out-of-phase resonant microwave drives to reduce single-qubit gate errors arising from the weak anharmonicity of transmon superconducting artificial atoms. To reduce the effect of higher levels present in the transmon spectrum, we apply Gaussian and derivative-of-Gaussian envelopes to the in-phase and out-of-phase quadratures, respectively, and optimize over their relative amplitude. Using randomized benchmarking, we obtain a minimum average error per gate of 0.007\ifmmode±\else\textpm\fi0.005 using 4-ns-wide pulses, which is limited by decoherence. This simple optimization technique works for multiple transmons coupled to a single microwave resonator in a quantum bus architecture.
Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the e f transition of a transmon qubit with an anharmonicity of − 212 MHz, we implement R X ( π / 2 ) gates achieving a leakage error below 3.0 × 10 − 5 down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of ( 1.56 ± 0.07 ) × 10 − 4 at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion. Published by the American Physical Society 2024
Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.
Logic gates in superconducting quantum processors are implemented through precisely shaped microwave pulses, whose durations are constrained by both device coherence and the multilevel structure of artificial atoms. While single-qubit fidelities above 0.999 are routinely achieved, the physical execution time of these gates remains a major bottleneck for deep quantum circuits. Here we examine single-qubit control across adiabatic [where the rotating-wave approximation (RWA) is valid], intermediate, and diabatic driving regimes using both an ideal two-level model and a realistic weakly anharmonic transmon Hamiltonian. By sweeping pulse durations and drive strengths over experimentally relevant ranges, we compare performance trade-offs and identify the conditions under which ultrashort gates remain viable. Our simulations uncover a quantitative speed-limit mechanism intrinsic to weakly anharmonic superconducting qubits: leakage to higher levels rises sharply once the peak Rabi rate exceeds a fixed fraction of the anharmonicity. Across all pulse shapes and driving regimes studied, we find a consistent numerical threshold at Ω max /|Δ|≈0.15−0.20, where Ω max denotes the peak drive (Rabi) amplitude and Δ is the transmon anharmonicity. Beyond this ratio, gate fidelity deteriorates regardless of waveform engineering. This boundary, obtained from full multilevel time-domain simulations spanning adiabatic, intermediate, and diabatic regimes, constitutes a previously unreported characterization of the fundamental leakage barrier in transmon devices. Our results, therefore, provide the first unified quantitative map linking pulse duration, driving strength, and anharmonicity, establishing why realistic superconducting qubits cannot sustain picosecond-scale gates despite ideal two-level predictions, and offering a practical benchmark for next-generation architectures seeking shorter, high-fidelity control.
Implementing high-fidelity multiqubit gates is critical for reducing circuit depth in near-term quantum processors and fault-tolerant architectures. However, realizing multiqubit interactions and entanglement remains a critical challenge that limits the implementation of multiqubit gates. Here we propose an all-microwave scheme to realize single-step multiqubit gates incorporating n control and m target qubits, tailored for frequency-tunable superconducting transmon networks. By leveraging cross-resonance (CR) drives, this approach induces effective two-body ZX interactions that are significantly stronger than those achieved in conventional resonant regimes, circumventing the need for tunable couplers. The system's effective Hamiltonian is analytically derived using both quad frame rotation and rigorous block diagonalization. These combined theoretical methods facilitate the identification of optimal parameter regimes that simultaneously enhance desired target couplings and suppress parasitic higher-order terms, such as ZXX interactions. Through numerical simulations and gradient-based pulse-shape optimization, we demonstrate three-qubit gates achieving fidelities exceeding 99.9% within a 60 ns gate duration. Furthermore, we evaluate the fundamental scalability of this framework by extending the optimization to a five-qubit CXXXX architecture, confirming the physical viability of the multi-target driving scheme. Because these multiqubit operations naturally emulate stabilizer measurements, this architecture provides a hardware-efficient strategy for reducing the circuit depth of stabilizer-type operations by replacing sequential two-qubit gate decompositions with single-step multiqubit gates.
For superconducting qubits, microwave pulses drive rotations around the Bloch sphere. The phase of these drives can be used to generate zero-duration arbitrary virtual Z gates, which, combined with two ${X}_{\ensuremath{\pi}/2}$ gates, can generate any SU(2) gate. Here we show how to best utilize these virtual Z gates to both improve algorithms and correct pulse errors. We perform randomized benchmarking using a Clifford set of Hadamard and Z gates and show that the error per Clifford is reduced versus a set consisting of standard finite-duration X and Y gates. Z gates can correct unitary rotation errors for weakly anharmonic qubits as an alternative to pulse-shaping techniques such as derivative removal by adiabatic gate (DRAG). We investigate leakage and show that a combination of DRAG pulse shaping to minimize leakage and Z gates to correct rotation errors realizes a 13.3 ns ${X}_{\ensuremath{\pi}/2}$ gate characterized by low error $[1.95(3)\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}4}]$ and low leakage $[3.1(6)\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}6}]$. Ultimately leakage is limited by the finite temperature of the qubit, but this limit is two orders of magnitude smaller than pulse errors due to decoherence.
Although single- and two-qubit gates are sufficient for universal quantum computation, single-shot three-qubit gates greatly simplify quantum error correction schemes and algorithms. We design fast, high-fidelity three-qubit entangling gates based on microwave pulses for transmon qubits coupled through a superconducting resonator. We show that when interqubit frequency differences are comparable to single-qubit anharmonicities, errors occur primarily through a single unwanted transition. This feature enables the design of fast three-qubit gates based on simple analytical pulse shapes that are engineered to minimize such errors. We show that a three-qubit ccz gate can be performed in 260 ns with fidelities exceeding 99.38, or 99.99 with numerical optimization.