Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1612.09384 · Physical review. B./Physical review. B

Fast microwave-driven three-qubit gates for cavity-coupled superconducting qubits

Edwin Barnes, Christian Arenz, Alexander Pitchford, Sophia E. Economou

Published Jul 6, 2017• 32 citations
arXivHTMLPDF

Abstract

Although single- and two-qubit gates are sufficient for universal quantum computation, single-shot three-qubit gates greatly simplify quantum error correction schemes and algorithms. We design fast, high-fidelity three-qubit entangling gates based on microwave pulses for transmon qubits coupled through a superconducting resonator. We show that when interqubit frequency differences are comparable to single-qubit anharmonicities, errors occur primarily through a single unwanted transition. This feature enables the design of fast three-qubit gates based on simple analytical pulse shapes that are engineered to minimize such errors. We show that a three-qubit ccz gate can be performed in 260 ns with fidelities exceeding $99.38%$, or $99.99%$ with numerical optimization.

DOI
10.1103/physrevb.96.024504

Related papers

Fast microwave-driven two-qubit gates between fluxonium qubits with a transmon coupler

Siddharth Singh, Eugene Y. Huang, Jinlun Hu +6 more

Two qubit gates constitute fundamental building blocks in the realization of large-scale quantum devices. Using superconducting circuits, two-qubit gates have previously been implemented in different ways with each method aiming to maximize gate fidelity. Another important goal of a new gate scheme is to minimize the complexity of gate calibration. In this work, we demonstrate a high-fidelity two-qubit gate between two fluxonium qubits enabled by an intermediate capacitively coupled transmon. The coupling strengths between the qubits and the coupler are designed to minimize residual crosstalk while still allowing for fast gate operations. The gate is based on frequency selectively exciting the coupler using a microwave drive to complete a 2$π$ rotation, conditional on the state of the fluxonium qubits. When successful, this drive scheme implements a conditional phase gate. Using analytically derived pulse shapes, we minimize unwanted excitations of the coupler and obtain gate errors of $10^{-2}$ for gate times below 60~ns. At longer durations, our gate is limited by relaxation of the coupler. Our results show how carefully designed control pulses can speed up frequency selective entangling gates.

arXiv:2504.13718•Physical Review Applied•Oct 28, 2025•5 citations

Fast Z Z -free entangling gates for superconducting qubits assisted by a driven resonator

Ziwen Huang, Tae-Yoon Kim, Tanay Roy +4 more

Engineering high-fidelity two-qubit gates is an indispensable step toward practical quantum computing. For superconducting quantum platforms, one important setback is the stray interaction between qubits, which causes significant coherent errors. For transmon qubits, protocols for mitigating such errors usually involve fine-tuning the hardware parameters or introducing usually noisy flux-tunable couplers. In this work, we propose a simple scheme to cancel these stray interactions. The coupler used for such cancelation is a driven high-coherence resonator, where the amplitude and frequency of the drive serve as control knobs. Through the resonator-induced-phase interaction, the static $ZZ$ coupling can be entirely neutralized. We numerically show that such a scheme can enable short and high-fidelity entangling gates, including cross-resonance controlled-not (cnot) gates within 40 ns and adiabatic controlled-$Z$ gates within 140 ns. Our architecture is not only $ZZ$-free, but also contains no extra noisy components, such that it preserves the coherence times of fixed-frequency transmon qubits. With the state-of-the-art coherence times, the error of our cross-resonance cnot gate can be reduced to below ${10}^{\ensuremath{-}4}$.

Physical Review Applied•Sep 4, 2024•6 citations

Fast ZZ-Free Entangling Gates for Superconducting Qubits Assisted by a Driven Resonator

Ziwen Huang, Tae-Yoon Kim, Tanay Roy +4 more

Engineering high-fidelity two-qubit gates is an indispensable step toward practical quantum computing. For superconducting quantum platforms, one important setback is the stray interaction between qubits, which causes significant coherent errors. For transmon qubits, protocols for mitigating such errors usually involve fine-tuning the hardware parameters or introducing usually noisy flux-tunable couplers. In this work, we propose a simple scheme to cancel these stray interactions. The coupler used for such cancellation is a driven high-coherence resonator, where the amplitude and frequency of the drive serve as control knobs. Through the resonator-induced-phase (RIP) interaction, the static ZZ coupling can be entirely neutralized. We numerically show that such a scheme can enable short and high-fidelity entangling gates, including cross-resonance CNOT gates within 40 ns and adiabatic CZ gates within 140 ns. Our architecture is not only ZZ free but also contains no extra noisy components, such that it preserves the coherence times of fixed-frequency transmon qubits. With the state-of-the-art coherence times, the error of our cross-resonance CNOT gate can be reduced to below 1e-4.

arXiv:2311.01332•Nov 2, 2023•0 citations

A universal quantum gate set for transmon qubits with strong ZZ interactions

Junling Long, Tongyu Zhao, Mustafa Bal +13 more

High-fidelity single- and two-qubit gates are essential building blocks for a fault-tolerant quantum computer. While there has been much progress in suppressing single-qubit gate errors in superconducting qubit systems, two-qubit gates still suffer from error rates that are orders of magnitude higher. One limiting factor is the residual ZZ-interaction, which originates from a coupling between computational states and higher-energy states. While this interaction is usually viewed as a nuisance, here we experimentally demonstrate that it can be exploited to produce a universal set of fast single- and two-qubit entangling gates in a coupled transmon qubit system. To implement arbitrary single-qubit rotations, we design a new protocol called the two-axis gate that is based on a three-part composite pulse. It rotates a single qubit independently of the state of the other qubit despite the strong ZZ-coupling. We achieve single-qubit gate fidelities as high as 99.1% from randomized benchmarking measurements. We then demonstrate both a CZ gate and a CNOT gate. Because the system has a strong ZZ-interaction, a CZ gate can be achieved by letting the system freely evolve for a gate time $t_g=53.8$ ns. To design the CNOT gate, we utilize an analytical microwave pulse shape based on the SWIPHT protocol for realizing fast, low-leakage gates. We obtain fidelities of 94.6% and 97.8% for the CNOT and CZ gates respectively from quantum progress tomography.

arXiv:2103.12305•Mar 23, 2021•7 citations

Mitigating crosstalk errors for simultaneous single-qubit gates on a superconducting quantum processor

Jaap J. Wesdorp, Eric Hyyppä, Joona Andersson +61 more

Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.

quant-pharXiv:2603.11018•Mar 12, 2026•0 citations

Robustness of error-suppressing entangling gates in cavity-coupled transmon qubits

Xiu–Hao Deng, Edwin Barnes, Sophia E. Economou

Superconducting transmon qubits comprise one of the most promising platforms for quantum information processing due to their long coherence times and to their scalability into larger qubit networks. However, their weakly anharmonic spectrum leads to spectral crowding in multiqubit systems, making it challenging to implement fast, high-fidelity gates while avoiding leakage errors. To address this challenge, we use a protocol for speeding up waveforms by inducing phases to harmful transitions (SWIPHT) [S. E. Economou and E. Barnes, Phys. Rev. B 91, 161405(R) (2015)], which yields smooth, simple microwave pulses designed to suppress leakage without sacrificing gate speed through spectral selectivity. Here, we determine the parameter regimes in which SWIPHT is effective and demonstrate that in these regimes, it systematically produces two-qubit gate fidelities for cavity-coupled transmons in the range 99.6%--99.9% with gate times as fast as 23 ns. Our results are obtained from full numerical simulations that include current experimental levels of relaxation and dephasing. These high fidelities persist over a wide range of system parameters that encompass many current experimental setups and are insensitive to small parameter variations and pulse imperfections.

arXiv:1703.03514•Physical review. B./Physical review. B•Jul 27, 2017•32 citations
Although single- and two-qubit gates are sufficient for universal quantum computation, single-shot three-qubit gates greatly simplify quantum error correction schemes and algorithms. We design fast, high-fidelity three-qubit entangling gates based on microwave pulses for transmon qubits coupled through a superconducting resonator. We show that when interqubit frequency differences are comparable to single-qubit anharmonicities, errors occur primarily through a single unwanted transition. This feature enables the design of fast three-qubit gates based on simple analytical pulse shapes that are engineered to minimize such errors. We show that a three-qubit ccz gate can be performed in 260 ns with fidelities exceeding 99.3899.38%99.38, or 99.9999.99%99.99 with numerical optimization.
Two qubit gates constitute fundamental building blocks in the realization of large-scale quantum devices. Using superconducting circuits, two-qubit gates have previously been implemented in different ways with each method aiming to maximize gate fidelity. Another important goal of a new gate scheme is to minimize the complexity of gate calibration. In this work, we demonstrate a high-fidelity two-qubit gate between two fluxonium qubits enabled by an intermediate capacitively coupled transmon. The coupling strengths between the qubits and the coupler are designed to minimize residual crosstalk while still allowing for fast gate operations. The gate is based on frequency selectively exciting the coupler using a microwave drive to complete a 2πππ rotation, conditional on the state of the fluxonium qubits. When successful, this drive scheme implements a conditional phase gate. Using analytically derived pulse shapes, we minimize unwanted excitations of the coupler and obtain gate errors of 10−210^{-2}10−2 for gate times below 60~ns. At longer durations, our gate is limited by relaxation of the coupler. Our results show how carefully designed control pulses can speed up frequency selective entangling gates.
Engineering high-fidelity two-qubit gates is an indispensable step toward practical quantum computing. For superconducting quantum platforms, one important setback is the stray interaction between qubits, which causes significant coherent errors. For transmon qubits, protocols for mitigating such errors usually involve fine-tuning the hardware parameters or introducing usually noisy flux-tunable couplers. In this work, we propose a simple scheme to cancel these stray interactions. The coupler used for such cancelation is a driven high-coherence resonator, where the amplitude and frequency of the drive serve as control knobs. Through the resonator-induced-phase interaction, the static ZZZZZZ coupling can be entirely neutralized. We numerically show that such a scheme can enable short and high-fidelity entangling gates, including cross-resonance controlled-not (cnot) gates within 40 ns and adiabatic controlled-ZZZ gates within 140 ns. Our architecture is not only ZZZZZZ-free, but also contains no extra noisy components, such that it preserves the coherence times of fixed-frequency transmon qubits. With the state-of-the-art coherence times, the error of our cross-resonance cnot gate can be reduced to below ${10}^{\ensuremath{-}4}$.
Engineering high-fidelity two-qubit gates is an indispensable step toward practical quantum computing. For superconducting quantum platforms, one important setback is the stray interaction between qubits, which causes significant coherent errors. For transmon qubits, protocols for mitigating such errors usually involve fine-tuning the hardware parameters or introducing usually noisy flux-tunable couplers. In this work, we propose a simple scheme to cancel these stray interactions. The coupler used for such cancellation is a driven high-coherence resonator, where the amplitude and frequency of the drive serve as control knobs. Through the resonator-induced-phase (RIP) interaction, the static ZZ coupling can be entirely neutralized. We numerically show that such a scheme can enable short and high-fidelity entangling gates, including cross-resonance CNOT gates within 40 ns and adiabatic CZ gates within 140 ns. Our architecture is not only ZZ free but also contains no extra noisy components, such that it preserves the coherence times of fixed-frequency transmon qubits. With the state-of-the-art coherence times, the error of our cross-resonance CNOT gate can be reduced to below 1e-4.
High-fidelity single- and two-qubit gates are essential building blocks for a fault-tolerant quantum computer. While there has been much progress in suppressing single-qubit gate errors in superconducting qubit systems, two-qubit gates still suffer from error rates that are orders of magnitude higher. One limiting factor is the residual ZZ-interaction, which originates from a coupling between computational states and higher-energy states. While this interaction is usually viewed as a nuisance, here we experimentally demonstrate that it can be exploited to produce a universal set of fast single- and two-qubit entangling gates in a coupled transmon qubit system. To implement arbitrary single-qubit rotations, we design a new protocol called the two-axis gate that is based on a three-part composite pulse. It rotates a single qubit independently of the state of the other qubit despite the strong ZZ-coupling. We achieve single-qubit gate fidelities as high as 99.1% from randomized benchmarking measurements. We then demonstrate both a CZ gate and a CNOT gate. Because the system has a strong ZZ-interaction, a CZ gate can be achieved by letting the system freely evolve for a gate time tg=53.8t_g=53.8tg​=53.8 ns. To design the CNOT gate, we utilize an analytical microwave pulse shape based on the SWIPHT protocol for realizing fast, low-leakage gates. We obtain fidelities of 94.6% and 97.8% for the CNOT and CZ gates respectively from quantum progress tomography.
Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.
Superconducting transmon qubits comprise one of the most promising platforms for quantum information processing due to their long coherence times and to their scalability into larger qubit networks. However, their weakly anharmonic spectrum leads to spectral crowding in multiqubit systems, making it challenging to implement fast, high-fidelity gates while avoiding leakage errors. To address this challenge, we use a protocol for speeding up waveforms by inducing phases to harmful transitions (SWIPHT) [S. E. Economou and E. Barnes, Phys. Rev. B 91, 161405(R) (2015)], which yields smooth, simple microwave pulses designed to suppress leakage without sacrificing gate speed through spectral selectivity. Here, we determine the parameter regimes in which SWIPHT is effective and demonstrate that in these regimes, it systematically produces two-qubit gate fidelities for cavity-coupled transmons in the range 99.6%--99.9% with gate times as fast as 23 ns. Our results are obtained from full numerical simulations that include current experimental levels of relaxation and dephasing. These high fidelities persist over a wide range of system parameters that encompass many current experimental setups and are insensitive to small parameter variations and pulse imperfections.