The ability to perform high-fidelity quantum nondemolition qubit readout is pivotal for the realization of large and powerful quantum computers. Such readout of superconducting qubits is generally enabled by amplifying the weak dispersive measurement signals using phase-preserving quantum-limited Josephson amplifiers with sufficient gain to dilute the contribution of the added noise by the output chain. Here, we further enhance the qubit readout fidelity by (1) simultaneously measuring the two-mode squeezed states of the amplified readout signals at the signal and idler frequencies of the nondegenerate amplifier and (2) coherently combining them at the classical processing stage following a relative rotation that maximizes the signal to noise ratio of the qubit-encoded readout quadrature. Such readout scheme exhibits enhancement in the readout fidelity for all practical values of amplifier gain and noise added by the output chain and is fully compatible with frequency multiplexed setups used in large quantum processors.
Residual noise photons in a readout resonator become a major source of dephasing for a superconducting qubit when the resonator is optimized for a fast, high-fidelity dispersive readout. Here, we propose and demonstrate a nonlinear Purcell filter that suppresses such an undesirable dephasing process without sacrificing the readout performance. When a readout pulse is applied, the filter automatically reduces the effective linewidth of the readout resonator, increasing the sensitivity of the qubit to the input field. The noise tolerance of the device we have fabricated is shown to be enhanced by a factor of 3 relative to a device with a linear filter. The measurement rate is enhanced by another factor of 3 by utilizing the bifurcation of the nonlinear filter. A readout fidelity of 99.4% and a quantum nondemolition fidelity of 99.2% are achieved using a 40-ns readout pulse. The nonlinear Purcell filter will be an effective tool for realizing a fast, high-fidelity readout without compromising the coherence time of the qubit. Published by the American Physical Society 2024
The field of superconducting qubits is constantly evolving with new circuit designs. However, when it comes to qubit readout, the use of simple transverse linear coupling remains overwhelmingly prevalent. This standard readout scheme has significant drawbacks: in addition to the Purcell effect, it suffers from a limitation on the maximal number of photons in the readout mode, which restricts the signal-to-noise ratio (SNR) and the Quantum Non-Demolition (QND) nature of the readout. Here, we explore the high-power regime by engineering a nonlinear coupling between a transmon qubit and its readout mode. Our approach builds upon previous work by Dassonneville et al. [Physical Review X 10, 011045 (2020)], on qubit readout with a non-perturbative cross-Kerr coupling in a transmon molecule. We demonstrate a readout fidelity of 99.21% with 89 photons utilizing a parametric amplifier. At this elevated photon number, the QND nature remains high at 96.7%. Even with up to 300 photons, the QNDness is only reduced by a few percent. This is qualitatively explained by deriving a critical number of photons associated with the nonlinear coupling, yielding a theoretical value of
nˉrcrit=377 photons for our sample's parameters. These results highlight the promising performance of the transmon molecule in the high-power regime, establishing it as a compelling platform for high-fidelity qubit readout.
The performance of a wide range of quantum computing algorithms and protocols depends critically on the fidelity and speed of the employed qubit readout. Examples include gate sequences benefiting from midcircuit real-time measurement-based feedback, such as qubit initialization, entanglement generation, teleportation, and, perhaps most importantly, quantum error correction. A prominent and widely used readout approach is based on the dispersive interaction of a superconducting qubit strongly coupled to a large-bandwidth readout resonator, frequently combined with a dedicated or shared Purcell filter protecting qubits from decay. By dynamically reducing the qubit-resonator detuning and thus increasing the dispersive shift, we demonstrate a beyond-state-of-the-art two-state-readout error of only 0.25% in 100-ns integration time. Maintaining low-readout-drive strength, we nearly quadruple the signal-to-noise ratio of the readout by doubling the readout-mode line width, which we quantify by considering the hybridization of the readout resonator and its dedicated Purcell filter. We find excellent agreement between our experimental data and our theoretical model. The presented results are expected to further boost the performance of new and existing algorithms and protocols critically depending on high-fidelity fast midcircuit measurements. Published by the American Physical Society 2024
We study bifurcation measurement of a multilevel superconducting qubit using a nonlinear resonator biased in the straddling regime, where the resonator frequency sits between two qubit transition frequencies. We find that high-fidelity bifurcation measurements are possible because of the enhanced qubit-state-dependent pull of the resonator frequency, the behavior of qubit-induced nonlinearities, and the reduced Purcell decay rate of the qubit that can be realized in this regime. Numerical simulations find up to a threefold improvement in qubit readout fidelity when operating in, rather than outside of, the straddling regime. High-fidelity measurements can be obtained at much smaller qubit-resonator couplings than current typical experimental realizations, reducing spectral crowding and potentially simplifying the implementation of multiqubit devices.
Fast and high-fidelity qubit measurement is crucial for achieving quantum error correction, a fundamental element in the development of universal quantum computing. For electron spin qubits, fast readout stands out as a major obstacle in the pursuit of error correction. In this work, we explore the dispersive measurement of an individual spin in a semiconductor double quantum dot coupled to a nonlinear microwave resonator. By utilizing displaced squeezed vacuum states, we achieve rapid and high-fidelity readout for semiconductor spin qubits. Our findings reveal that introducing modest squeezing and mild nonlinearity can significantly improve both the signal-to-noise ratio (SNR) and the fidelity of qubit-state readout. By properly marching the phases of squeezing, the nonlinear strength, and the local oscillator, the optimal readout time can be reduced to the sub-microsecond range. With current technology parameters (
κ≈2χs, $χ_s\approx 2π\times 0.15 \:\mbox{MHz}$), utilizing a displaced squeezed vacuum state with
30 photons and a modest squeezing parameter
r≈0.6, along with a nonlinear microwave resonator charactered by a strength of
λ≈−1.2χs, a readout fidelity of
98% can be attained within a readout time of around $0.6\:μ\mbox{s}$. Intriguing, by using a positive nonlinear strength of
λ≈1.2χs, it is possible to achieve an SNR of approximately
6 and a readout fidelity of
99.99% at a slightly later time, around $0.9\:μ\mbox{s}$, while maintaining all other parameters at the same settings.