Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1004.4323 · Physical Review Letters

High-Fidelity Readout in Circuit Quantum Electrodynamics Using the Jaynes-Cummings Nonlinearity

M. D. Reed, L. DiCarlo, Blake Johnson, Luyan Sun, David Schuster, Luigi Frunzio, Robert J. Schoelkopf

Published Oct 19, 2010• 270 citations
arXivHTMLPDF

Abstract

We demonstrate a qubit readout scheme that exploits the Jaynes-Cummings nonlinearity of a superconducting cavity coupled to transmon qubits. We find that, in the strongly driven dispersive regime of this system, there is the unexpected onset of a high-transmission "bright" state at a critical power which depends sensitively on the initial qubit state. A simple and robust measurement protocol exploiting this effect achieves a single-shot fidelity of 87% using a conventional sample design and experimental setup, and at least 61% fidelity to joint correlations of three qubits.

DOI
10.1103/physrevlett.105.173601

Related papers

Nonlinear oscillators and high fidelity qubit state measurement in circuit quantum electrodynamics

Eran Ginossar, Lev S. Bishop, S. M. Girvin

This chapter analyzes the high excitation nonlinear response of the Jaynes–Cummings model in quantum optics when the qubit and cavity are strongly coupled. It studies the response in the parameter ranges appropriate for transmon qubits in the circuit quantum electrodynamics architecture. It focuses on the situation where the system behaves essentially as a nonlinear quantum oscillator and explores quantum and semi-classical dynamics. One of the central motivations is that under strong excitation tones, the nonlinear response can lead to qubit quantum state discrimination and the chapter then presents results for the cases when the qubit and cavity are on resonance or far off-resonance (dispersive).

arXiv:1207.4645•Oxford University Press eBooks•Jul 26, 2012•0 citations

Catch-Disperse-Release Readout for Superconducting Qubits

Eyob Alebachew Sete, Andrei Galiautdinov, Eric Mlinar +2 more

We analyze a single-shot readout for superconducting qubits via the controlled catch, dispersion, and release of a microwave field. A tunable coupler is used to decouple the microwave resonator from the transmission line during the dispersive qubit-resonator interaction, thus circumventing damping from the Purcell effect. We show that, if the qubit frequency tuning is sufficiently adiabatic, a fast high-fidelity qubit readout is possible, even in the strongly nonlinear dispersive regime. Interestingly, the Jaynes-Cummings nonlinearity leads to the quadrature squeezing of the resonator field below the standard quantum limit, resulting in a significant decrease of the measurement error.

arXiv:1302.7020•Physical Review Letters•May 22, 2013•31 citations

Protocol for high-fidelity readout in the photon-blockade regime of circuit QED

Eran Ginossar, Lev S. Bishop, David Schuster +1 more

The driven-damped Jaynes-Cummings model in the regime of strong coupling is found to exhibit a coexistence between the quantum photon blockaded state and a quasicoherent bright state. We characterize the slow time scales and the basin of attraction of these metastable states using full quantum simulations. This form of bistability can be useful for implementing a qubit readout scheme that does not require additional circuit elements. We propose a coherent control sequence that makes use of a simple linear chirp of drive amplitude and frequency as well as qubit frequency. By optimizing the parameters of the system and the control pulse, we demonstrate theoretically very high readout fidelities ($>$$98%$) and high contrast with experimentally realistic parameters for qubits implemented in the circuit QED architecture.

arXiv:1004.4385•Physical Review A•Aug 31, 2010•23 citations

Circuit quantum electrodynamics with a nonlinear resonator

Patrice Bertet, Florian R. Ong, Maxime Boissonneault +6 more

This chapter investigates the coupling of a two-level system to a nonlinear resonator, one of the simplest extensions to the well-known Jaynes–Cummings model. In the experiment, the two-level system is a superconducting transmon qubit, and the resonator is a coplanar resonator with a Kerr nonlinearity induced by a Josephson junction. Effects arising from the resonator nonlinearity (bistability, parametric amplification, squeezing) qualitatively modify the dispersive qubit-resonator coupling. This makes it possible to design a qubit readout which has both a high fidelity and the potential of being QND. Motivated by fundamental and practical issues concerning the quantum limit of such a measurement, the chapter also studies spectroscopically the quantum back action exerted by the intraresonator field onto the qubit. Qualitative agreement is obtained with analytical results and quantitative agreement with numerical simulations.

Oxford University Press eBooks•Jul 26, 2012•7 citations

Circuit quantum electrodynamics with a nonlinear resonator

Patrice Bertet, Florian R. Ong, M. Boissonneault +6 more

One of the most studied model systems in quantum optics is a two-level atom strongly coupled to a single mode of the electromagnetic field stored in a cavity, a research field named cavity quantum electrodynamics or CQED. CQED has recently received renewed attention due to its implementation with superconducting artificial atoms and coplanar resonators in the so-called circuit quantum electrodynamics (cQED) architecture. In cQED, the couplings can be much stronger than in CQED due to the design flexibility of superconducting circuits and to the enhanced field confinement in one-dimensional cavities. This enabled the realization of fundamental quantum physics and quantum information processing experiments with a degree of control comparable to that obtained in CQED. The purpose of this chapter is to investigate the situation where the resonator to which the atom is coupled is made nonlinear with a Kerr-type nonlinearity, causing its energy levels to be nonequidistant. The system is then described by a nonlinear Jaynes-Cummings Hamiltonian. This considerably enriches the physics since a pumped nonlinear resonator displays bistability, parametric amplification, and squeezing. The interplay of strong coupling and these nonlinear effects constitutes a novel model system for quantum optics that can be implemented experimentally with superconducting circuits. This chapter is organized as follows. In a first section we present the system consisting of a superconducting Kerr nonlinear resonator strongly coupled to a transmon qubit. In the second section, we describe the response of the sole nonlinear resonator to an external drive. In the third section, we show how the resonator bistability can be used to perform a high-fidelity readout of the transmon qubit. In the last section, we investigate the quantum backaction exerted by the intracavity field on the qubit.

arXiv:1111.0501•Nov 2, 2011•2 citations

High-power readout of a transmon qubit using a nonlinear coupling

Mori, Cyril, Vladimir Milchakov, Francesca d'Esposito +13 more

The field of superconducting qubits is constantly evolving with new circuit designs. However, when it comes to qubit readout, the use of simple transverse linear coupling remains overwhelmingly prevalent. This standard readout scheme has significant drawbacks: in addition to the Purcell effect, it suffers from a limitation on the maximal number of photons in the readout mode, which restricts the signal-to-noise ratio (SNR) and the Quantum Non-Demolition (QND) nature of the readout. Here, we explore the high-power regime by engineering a nonlinear coupling between a transmon qubit and its readout mode. Our approach builds upon previous work by Dassonneville et al. [Physical Review X 10, 011045 (2020)], on qubit readout with a non-perturbative cross-Kerr coupling in a transmon molecule. We demonstrate a readout fidelity of 99.21% with 89 photons utilizing a parametric amplifier. At this elevated photon number, the QND nature remains high at 96.7%. Even with up to 300 photons, the QNDness is only reduced by a few percent. This is qualitatively explained by deriving a critical number of photons associated with the nonlinear coupling, yielding a theoretical value of $\bar{n}_r^\text{crit} = 377$ photons for our sample's parameters. These results highlight the promising performance of the transmon molecule in the high-power regime, establishing it as a compelling platform for high-fidelity qubit readout.

arXiv:2507.03642•Jul 4, 2025•0 citations
We demonstrate a qubit readout scheme that exploits the Jaynes-Cummings nonlinearity of a superconducting cavity coupled to transmon qubits. We find that, in the strongly driven dispersive regime of this system, there is the unexpected onset of a high-transmission "bright" state at a critical power which depends sensitively on the initial qubit state. A simple and robust measurement protocol exploiting this effect achieves a single-shot fidelity of 87% using a conventional sample design and experimental setup, and at least 61% fidelity to joint correlations of three qubits.
This chapter analyzes the high excitation nonlinear response of the Jaynes–Cummings model in quantum optics when the qubit and cavity are strongly coupled. It studies the response in the parameter ranges appropriate for transmon qubits in the circuit quantum electrodynamics architecture. It focuses on the situation where the system behaves essentially as a nonlinear quantum oscillator and explores quantum and semi-classical dynamics. One of the central motivations is that under strong excitation tones, the nonlinear response can lead to qubit quantum state discrimination and the chapter then presents results for the cases when the qubit and cavity are on resonance or far off-resonance (dispersive).
We analyze a single-shot readout for superconducting qubits via the controlled catch, dispersion, and release of a microwave field. A tunable coupler is used to decouple the microwave resonator from the transmission line during the dispersive qubit-resonator interaction, thus circumventing damping from the Purcell effect. We show that, if the qubit frequency tuning is sufficiently adiabatic, a fast high-fidelity qubit readout is possible, even in the strongly nonlinear dispersive regime. Interestingly, the Jaynes-Cummings nonlinearity leads to the quadrature squeezing of the resonator field below the standard quantum limit, resulting in a significant decrease of the measurement error.
The driven-damped Jaynes-Cummings model in the regime of strong coupling is found to exhibit a coexistence between the quantum photon blockaded state and a quasicoherent bright state. We characterize the slow time scales and the basin of attraction of these metastable states using full quantum simulations. This form of bistability can be useful for implementing a qubit readout scheme that does not require additional circuit elements. We propose a coherent control sequence that makes use of a simple linear chirp of drive amplitude and frequency as well as qubit frequency. By optimizing the parameters of the system and the control pulse, we demonstrate theoretically very high readout fidelities (>>>9898%98) and high contrast with experimentally realistic parameters for qubits implemented in the circuit QED architecture.
This chapter investigates the coupling of a two-level system to a nonlinear resonator, one of the simplest extensions to the well-known Jaynes–Cummings model. In the experiment, the two-level system is a superconducting transmon qubit, and the resonator is a coplanar resonator with a Kerr nonlinearity induced by a Josephson junction. Effects arising from the resonator nonlinearity (bistability, parametric amplification, squeezing) qualitatively modify the dispersive qubit-resonator coupling. This makes it possible to design a qubit readout which has both a high fidelity and the potential of being QND. Motivated by fundamental and practical issues concerning the quantum limit of such a measurement, the chapter also studies spectroscopically the quantum back action exerted by the intraresonator field onto the qubit. Qualitative agreement is obtained with analytical results and quantitative agreement with numerical simulations.
One of the most studied model systems in quantum optics is a two-level atom strongly coupled to a single mode of the electromagnetic field stored in a cavity, a research field named cavity quantum electrodynamics or CQED. CQED has recently received renewed attention due to its implementation with superconducting artificial atoms and coplanar resonators in the so-called circuit quantum electrodynamics (cQED) architecture. In cQED, the couplings can be much stronger than in CQED due to the design flexibility of superconducting circuits and to the enhanced field confinement in one-dimensional cavities. This enabled the realization of fundamental quantum physics and quantum information processing experiments with a degree of control comparable to that obtained in CQED. The purpose of this chapter is to investigate the situation where the resonator to which the atom is coupled is made nonlinear with a Kerr-type nonlinearity, causing its energy levels to be nonequidistant. The system is then described by a nonlinear Jaynes-Cummings Hamiltonian. This considerably enriches the physics since a pumped nonlinear resonator displays bistability, parametric amplification, and squeezing. The interplay of strong coupling and these nonlinear effects constitutes a novel model system for quantum optics that can be implemented experimentally with superconducting circuits. This chapter is organized as follows. In a first section we present the system consisting of a superconducting Kerr nonlinear resonator strongly coupled to a transmon qubit. In the second section, we describe the response of the sole nonlinear resonator to an external drive. In the third section, we show how the resonator bistability can be used to perform a high-fidelity readout of the transmon qubit. In the last section, we investigate the quantum backaction exerted by the intracavity field on the qubit.
The field of superconducting qubits is constantly evolving with new circuit designs. However, when it comes to qubit readout, the use of simple transverse linear coupling remains overwhelmingly prevalent. This standard readout scheme has significant drawbacks: in addition to the Purcell effect, it suffers from a limitation on the maximal number of photons in the readout mode, which restricts the signal-to-noise ratio (SNR) and the Quantum Non-Demolition (QND) nature of the readout. Here, we explore the high-power regime by engineering a nonlinear coupling between a transmon qubit and its readout mode. Our approach builds upon previous work by Dassonneville et al. [Physical Review X 10, 011045 (2020)], on qubit readout with a non-perturbative cross-Kerr coupling in a transmon molecule. We demonstrate a readout fidelity of 99.21% with 89 photons utilizing a parametric amplifier. At this elevated photon number, the QND nature remains high at 96.7%. Even with up to 300 photons, the QNDness is only reduced by a few percent. This is qualitatively explained by deriving a critical number of photons associated with the nonlinear coupling, yielding a theoretical value of nˉrcrit=377\bar{n}_r^\text{crit} = 377nˉrcrit​=377 photons for our sample's parameters. These results highlight the promising performance of the transmon molecule in the high-power regime, establishing it as a compelling platform for high-fidelity qubit readout.