Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1111.0501

Circuit quantum electrodynamics with a nonlinear resonator

Patrice Bertet, Florian R. Ong, M. Boissonneault, Bolduc, A., F. Mallet, Andrew C. Doherty, Alexandre Blais, D. Vion, Esteve, D.

Published Nov 2, 2011• 2 citations
arXivHTMLPDF

Abstract

One of the most studied model systems in quantum optics is a two-level atom strongly coupled to a single mode of the electromagnetic field stored in a cavity, a research field named cavity quantum electrodynamics or CQED. CQED has recently received renewed attention due to its implementation with superconducting artificial atoms and coplanar resonators in the so-called circuit quantum electrodynamics (cQED) architecture. In cQED, the couplings can be much stronger than in CQED due to the design flexibility of superconducting circuits and to the enhanced field confinement in one-dimensional cavities. This enabled the realization of fundamental quantum physics and quantum information processing experiments with a degree of control comparable to that obtained in CQED. The purpose of this chapter is to investigate the situation where the resonator to which the atom is coupled is made nonlinear with a Kerr-type nonlinearity, causing its energy levels to be nonequidistant. The system is then described by a nonlinear Jaynes-Cummings Hamiltonian. This considerably enriches the physics since a pumped nonlinear resonator displays bistability, parametric amplification, and squeezing. The interplay of strong coupling and these nonlinear effects constitutes a novel model system for quantum optics that can be implemented experimentally with superconducting circuits. This chapter is organized as follows. In a first section we present the system consisting of a superconducting Kerr nonlinear resonator strongly coupled to a transmon qubit. In the second section, we describe the response of the sole nonlinear resonator to an external drive. In the third section, we show how the resonator bistability can be used to perform a high-fidelity readout of the transmon qubit. In the last section, we investigate the quantum backaction exerted by the intracavity field on the qubit.

DOI
10.48550/arxiv.1111.0501

Related papers

Circuit quantum electrodynamics with a nonlinear resonator

Patrice Bertet, Florian R. Ong, Maxime Boissonneault +6 more

This chapter investigates the coupling of a two-level system to a nonlinear resonator, one of the simplest extensions to the well-known Jaynes–Cummings model. In the experiment, the two-level system is a superconducting transmon qubit, and the resonator is a coplanar resonator with a Kerr nonlinearity induced by a Josephson junction. Effects arising from the resonator nonlinearity (bistability, parametric amplification, squeezing) qualitatively modify the dispersive qubit-resonator coupling. This makes it possible to design a qubit readout which has both a high fidelity and the potential of being QND. Motivated by fundamental and practical issues concerning the quantum limit of such a measurement, the chapter also studies spectroscopically the quantum back action exerted by the intraresonator field onto the qubit. Qualitative agreement is obtained with analytical results and quantitative agreement with numerical simulations.

Oxford University Press eBooks•Jul 26, 2012•7 citations

Theory of nonclassical photonic states in driven-dissipative circuit quantum electrodynamics

Matthew Elliott

Superconducting circuits provide an architecture upon which cavity quantum electrodynamics (QED) can be implemented at microwave frequencies in a highly tunable environment. Known as circuit QED, these systems can achieve larger nonlinearities, stronger coupling and greater controllability than can be achieved in cavity QED, all in a customisable, solid state device, making this technology an exciting test bed for both quantum optics and quantum information processing. These new parameter regimes open up new avenues for quantum technology, while also allowing older quantum optics results to finally be tested. In particular is is now possible to experimentally produce nonclassical states, such as squeezed and Schr\\"odinger cat states, relatively simply in these devices. Using open quantum systems methods, in this thesis we investigate four problems which involve the use of nonclassical states in circuit QED. First we investigate the effects of a Kerr nonlinearity on the ability to preserve transported squeezed states in a superconducting cavity, and whether this setup permits us to generate, and perform tomography, of a highly squeezed field using a qubit, with possible applications in the characterisation of sources of squeezed microwaves. Second, we present a novel scheme for the amplification of cat states using a coupled qubit and external microwave drives, inspired by the stimulated Raman adiabatic passage. This scheme differs from similar techniques in circuit QED in that it is deterministic and therefore compatible with a protocol for stabilising cat states without the need for complex dissipation engineering. Next we use solutions of Fokker-Planck equations to study the exact steady-state response of two nonlinear systems: a transmon qubit coupled to a readout resonator, where we find good agreement with experiments and see simultaneous bistability of the cavity and transmon; and a parametrically driven nonlinear resonator, where we compare the classical and quantum phases of the system and discuss applications in the generation of squeezed states and stabilisation of cat states. Finally, we investigate the use of two different types of superconducting qubits in a single experiment, seeing that this enables engineering of the self- and cross-Kerr effects in a line of cavities. This could provide a valuable means of entangling cavity states, in addition to a resource for quantum simulation.

•Jul 31, 2017•0 citations

From strong to ultrastrong coupling in circuit QED architectures

Thomas M. Niemczyk

The field of cavity quantum electrodynamics (cavity QED) studies the interaction between light and matter on a fundamental level: a single atom interacts with a single photon. If the atom-photon coupling is larger than any dissipative effects, the system enters the strong-coupling limit. A peculiarity of this regime is the possibility to form coherent superpositions of light and matter excitations - a kind of 'molecule' consisting of an atomic and a photonic contribution. The novel research field of circuit QED extends cavity QED concepts to solid-state based system. Here, a superconducting quantum bit is coupled to an on-chip superconducting one-dimensional waveguide resonator. Owing to the small mode-volume of the resonant cavity, the large dipole moment of the 'artificial atom' and the enormous engineering potential inherent to superconducting quantum circuits, remarkable atom-photon coupling strengths can be realized. This thesis describes the theoretical framework, the development of fabrication techniques and the implementation of experimental characterization techniques for superconducting quantum circuits for circuit QED applications. In particular, we study the interaction between superconducting flux quantum bits and high-quality coplanar waveguide resonators in the strong-coupling limit. Furthermore, we report on the first experimental realization of a circuit QED system operating in the ultrastrong-coupling regime, where the atom-photon coupling rate reaches a considerable fraction of the relevant system frequencies. In these experiments we could observe phenomena that can not be explained within the renowned Jaynes-Cummings model.

•Jan 1, 2011•2 citations

CIRCUIT QUANTUM ELECTRODYNAMICS

Circuit Quantum Electrodynamics (cQED), the study of the interaction between superconducting circuits behaving as artificial atoms and 1-dimensional transmission-line resonators, has shown much promise for quantum information processing tasks.For the purposes of quantum computing it is usual to approximate the artificial atoms as 2-level qubits, and much effort has been expended on attempts to isolate these qubits from the environment and to invent ever more sophisticated control and measurement schemes.Rather than focussing on these technological aspects of the field, this thesis investigates the opportunities for using these carefully engineered systems for answering questions of fundamental physics.The low dissipation and small mode volume of the circuits allows easy access to the strong-coupling regime of quantum optics, where one can investigate the interaction of light and matter at the level of single atoms and photons.A signature of strong coupling is the splitting of the cavity transmission peak into a pair of resolvable peaks when a single resonant atom is placed inside the cavity-an effect known as vacuum Rabi splitting.The cQED architecture is ideally suited for going beyond this linear response effect.This thesis shows that increasing the drive power results in two unique nonlinear features in the transmitted heterodyne signal: the supersplitting of each vacuum Rabi peak into a doublet, and the appearance of additional peaks with the characteristic √ n spacing of the Jaynes-Cummings ladder.These constitute direct evidence for the coupling between the quantized microwave field and the anharmonic spectrum of a superconducting qubit acting as an artificial atom.This thesis also addresses the idea of Bell tests, which are experiments that aim to disprove certain types of classical theories, presenting a proposed method for preparing maximally entangled 3-qubit states via a 'preparation by measurement' scheme using an optimized filter on the time-dependent signal obtained via homodyne monitoring of the transmitted microwave field.

WORLD SCIENTIFIC eBooks•Jul 21, 2019•47 citations

Nonlinear oscillators and high fidelity qubit state measurement in circuit quantum electrodynamics

Eran Ginossar, Lev S. Bishop, S. M. Girvin

This chapter analyzes the high excitation nonlinear response of the Jaynes–Cummings model in quantum optics when the qubit and cavity are strongly coupled. It studies the response in the parameter ranges appropriate for transmon qubits in the circuit quantum electrodynamics architecture. It focuses on the situation where the system behaves essentially as a nonlinear quantum oscillator and explores quantum and semi-classical dynamics. One of the central motivations is that under strong excitation tones, the nonlinear response can lead to qubit quantum state discrimination and the chapter then presents results for the cases when the qubit and cavity are on resonance or far off-resonance (dispersive).

arXiv:1207.4645•Oxford University Press eBooks•Jul 26, 2012•0 citations

Effective nonlinear interactions in circuit QED and optomechanical setups

Samuel Aldana

In this thesis, we study two different physical systems, namely superconducting circuits and optomechanical cavities. \nIn the first part of the thesis, we study superconducting qubits and resonators and their potential to implement quantum information processing tasks. We propose a circuit quantum electrodynamics realization of a protocol to generate a Greenberger-Horne-Zeilinger (GHZ) state for transmon qubits homogeneously coupled to a microwave cavity in the dispersive limit. We derive an effective Hamiltonian with pairwise qubit exchange interactions of the XY type that can be globally controlled. Starting from a separable initial state, these interactions allow to generate a multi-qubit GHZ state within a time that does not depend on the number of qubits. We discuss how to probe the non-local nature and the genuine multipartite entanglement of the generated state. Finally, we investigate the stability of the proposed scheme to inhomogeneities in the physical parameters and the weak anharmonicity of transmon qubits. \nIn the second part of the thesis, we study optomechanical systems in which the position of a mechanical resonator modulates the resonance frequency of an optical cavity. The resulting radiation-pressure interaction is intrinsically nonlinear and can be used to implement strong Kerr nonlinearities and an effective interaction between photons. We investigate the optical bistability of such a system. The steady-state mean-field equation of the optical mode is identical to the one for a Kerr medium, and thus we expect it to have the same characteristic behavior with a lower, a middle, and an upper branch. However, the presence of position fluctuations of the mechanical resonator leads to a new feature: the upper branch will become unstable at sufficiently strong driving in certain parameter regimes. We identify the appropriate parameter regime for the upper branch to be stable, and we confirm, by numerical investigation of the quantum steady state, that the mechanical mode indeed acts as a Kerr nonlinearity for the optical mode in the low-temperature limit. This equivalence of the optomechanical system and the Kerr medium will be important for future applications of cavity optomechanics in quantum nonlinear optics and quantum information science. \n

•Jan 1, 2014•0 citations
One of the most studied model systems in quantum optics is a two-level atom strongly coupled to a single mode of the electromagnetic field stored in a cavity, a research field named cavity quantum electrodynamics or CQED. CQED has recently received renewed attention due to its implementation with superconducting artificial atoms and coplanar resonators in the so-called circuit quantum electrodynamics (cQED) architecture. In cQED, the couplings can be much stronger than in CQED due to the design flexibility of superconducting circuits and to the enhanced field confinement in one-dimensional cavities. This enabled the realization of fundamental quantum physics and quantum information processing experiments with a degree of control comparable to that obtained in CQED. The purpose of this chapter is to investigate the situation where the resonator to which the atom is coupled is made nonlinear with a Kerr-type nonlinearity, causing its energy levels to be nonequidistant. The system is then described by a nonlinear Jaynes-Cummings Hamiltonian. This considerably enriches the physics since a pumped nonlinear resonator displays bistability, parametric amplification, and squeezing. The interplay of strong coupling and these nonlinear effects constitutes a novel model system for quantum optics that can be implemented experimentally with superconducting circuits. This chapter is organized as follows. In a first section we present the system consisting of a superconducting Kerr nonlinear resonator strongly coupled to a transmon qubit. In the second section, we describe the response of the sole nonlinear resonator to an external drive. In the third section, we show how the resonator bistability can be used to perform a high-fidelity readout of the transmon qubit. In the last section, we investigate the quantum backaction exerted by the intracavity field on the qubit.
This chapter investigates the coupling of a two-level system to a nonlinear resonator, one of the simplest extensions to the well-known Jaynes–Cummings model. In the experiment, the two-level system is a superconducting transmon qubit, and the resonator is a coplanar resonator with a Kerr nonlinearity induced by a Josephson junction. Effects arising from the resonator nonlinearity (bistability, parametric amplification, squeezing) qualitatively modify the dispersive qubit-resonator coupling. This makes it possible to design a qubit readout which has both a high fidelity and the potential of being QND. Motivated by fundamental and practical issues concerning the quantum limit of such a measurement, the chapter also studies spectroscopically the quantum back action exerted by the intraresonator field onto the qubit. Qualitative agreement is obtained with analytical results and quantitative agreement with numerical simulations.
Superconducting circuits provide an architecture upon which cavity quantum electrodynamics (QED) can be implemented at microwave frequencies in a highly tunable environment. Known as circuit QED, these systems can achieve larger nonlinearities, stronger coupling and greater controllability than can be achieved in cavity QED, all in a customisable, solid state device, making this technology an exciting test bed for both quantum optics and quantum information processing. These new parameter regimes open up new avenues for quantum technology, while also allowing older quantum optics results to finally be tested. In particular is is now possible to experimentally produce nonclassical states, such as squeezed and Schr\\"odinger cat states, relatively simply in these devices. Using open quantum systems methods, in this thesis we investigate four problems which involve the use of nonclassical states in circuit QED. First we investigate the effects of a Kerr nonlinearity on the ability to preserve transported squeezed states in a superconducting cavity, and whether this setup permits us to generate, and perform tomography, of a highly squeezed field using a qubit, with possible applications in the characterisation of sources of squeezed microwaves. Second, we present a novel scheme for the amplification of cat states using a coupled qubit and external microwave drives, inspired by the stimulated Raman adiabatic passage. This scheme differs from similar techniques in circuit QED in that it is deterministic and therefore compatible with a protocol for stabilising cat states without the need for complex dissipation engineering. Next we use solutions of Fokker-Planck equations to study the exact steady-state response of two nonlinear systems: a transmon qubit coupled to a readout resonator, where we find good agreement with experiments and see simultaneous bistability of the cavity and transmon; and a parametrically driven nonlinear resonator, where we compare the classical and quantum phases of the system and discuss applications in the generation of squeezed states and stabilisation of cat states. Finally, we investigate the use of two different types of superconducting qubits in a single experiment, seeing that this enables engineering of the self- and cross-Kerr effects in a line of cavities. This could provide a valuable means of entangling cavity states, in addition to a resource for quantum simulation.
The field of cavity quantum electrodynamics (cavity QED) studies the interaction between light and matter on a fundamental level: a single atom interacts with a single photon. If the atom-photon coupling is larger than any dissipative effects, the system enters the strong-coupling limit. A peculiarity of this regime is the possibility to form coherent superpositions of light and matter excitations - a kind of 'molecule' consisting of an atomic and a photonic contribution. The novel research field of circuit QED extends cavity QED concepts to solid-state based system. Here, a superconducting quantum bit is coupled to an on-chip superconducting one-dimensional waveguide resonator. Owing to the small mode-volume of the resonant cavity, the large dipole moment of the 'artificial atom' and the enormous engineering potential inherent to superconducting quantum circuits, remarkable atom-photon coupling strengths can be realized. This thesis describes the theoretical framework, the development of fabrication techniques and the implementation of experimental characterization techniques for superconducting quantum circuits for circuit QED applications. In particular, we study the interaction between superconducting flux quantum bits and high-quality coplanar waveguide resonators in the strong-coupling limit. Furthermore, we report on the first experimental realization of a circuit QED system operating in the ultrastrong-coupling regime, where the atom-photon coupling rate reaches a considerable fraction of the relevant system frequencies. In these experiments we could observe phenomena that can not be explained within the renowned Jaynes-Cummings model.
Circuit Quantum Electrodynamics (cQED), the study of the interaction between superconducting circuits behaving as artificial atoms and 1-dimensional transmission-line resonators, has shown much promise for quantum information processing tasks.For the purposes of quantum computing it is usual to approximate the artificial atoms as 2-level qubits, and much effort has been expended on attempts to isolate these qubits from the environment and to invent ever more sophisticated control and measurement schemes.Rather than focussing on these technological aspects of the field, this thesis investigates the opportunities for using these carefully engineered systems for answering questions of fundamental physics.The low dissipation and small mode volume of the circuits allows easy access to the strong-coupling regime of quantum optics, where one can investigate the interaction of light and matter at the level of single atoms and photons.A signature of strong coupling is the splitting of the cavity transmission peak into a pair of resolvable peaks when a single resonant atom is placed inside the cavity-an effect known as vacuum Rabi splitting.The cQED architecture is ideally suited for going beyond this linear response effect.This thesis shows that increasing the drive power results in two unique nonlinear features in the transmitted heterodyne signal: the supersplitting of each vacuum Rabi peak into a doublet, and the appearance of additional peaks with the characteristic √ n spacing of the Jaynes-Cummings ladder.These constitute direct evidence for the coupling between the quantized microwave field and the anharmonic spectrum of a superconducting qubit acting as an artificial atom.This thesis also addresses the idea of Bell tests, which are experiments that aim to disprove certain types of classical theories, presenting a proposed method for preparing maximally entangled 3-qubit states via a 'preparation by measurement' scheme using an optimized filter on the time-dependent signal obtained via homodyne monitoring of the transmitted microwave field.
This chapter analyzes the high excitation nonlinear response of the Jaynes–Cummings model in quantum optics when the qubit and cavity are strongly coupled. It studies the response in the parameter ranges appropriate for transmon qubits in the circuit quantum electrodynamics architecture. It focuses on the situation where the system behaves essentially as a nonlinear quantum oscillator and explores quantum and semi-classical dynamics. One of the central motivations is that under strong excitation tones, the nonlinear response can lead to qubit quantum state discrimination and the chapter then presents results for the cases when the qubit and cavity are on resonance or far off-resonance (dispersive).
In this thesis, we study two different physical systems, namely superconducting circuits and optomechanical cavities. \nIn the first part of the thesis, we study superconducting qubits and resonators and their potential to implement quantum information processing tasks. We propose a circuit quantum electrodynamics realization of a protocol to generate a Greenberger-Horne-Zeilinger (GHZ) state for transmon qubits homogeneously coupled to a microwave cavity in the dispersive limit. We derive an effective Hamiltonian with pairwise qubit exchange interactions of the XY type that can be globally controlled. Starting from a separable initial state, these interactions allow to generate a multi-qubit GHZ state within a time that does not depend on the number of qubits. We discuss how to probe the non-local nature and the genuine multipartite entanglement of the generated state. Finally, we investigate the stability of the proposed scheme to inhomogeneities in the physical parameters and the weak anharmonicity of transmon qubits. \nIn the second part of the thesis, we study optomechanical systems in which the position of a mechanical resonator modulates the resonance frequency of an optical cavity. The resulting radiation-pressure interaction is intrinsically nonlinear and can be used to implement strong Kerr nonlinearities and an effective interaction between photons. We investigate the optical bistability of such a system. The steady-state mean-field equation of the optical mode is identical to the one for a Kerr medium, and thus we expect it to have the same characteristic behavior with a lower, a middle, and an upper branch. However, the presence of position fluctuations of the mechanical resonator leads to a new feature: the upper branch will become unstable at sufficiently strong driving in certain parameter regimes. We identify the appropriate parameter regime for the upper branch to be stable, and we confirm, by numerical investigation of the quantum steady state, that the mechanical mode indeed acts as a Kerr nonlinearity for the optical mode in the low-temperature limit. This equivalence of the optomechanical system and the Kerr medium will be important for future applications of cavity optomechanics in quantum nonlinear optics and quantum information science. \n