Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:quant-ph/0409215 · Optics Express

Ghost imaging schemes: fast and broadband

Morten Bache, E. Brambilla, A. Gatti, L. A. Lugiato

Published Nov 29, 2004• 34 citations
arXivHTMLPDF

Abstract

In ghost imaging schemes information about an object is extracted by measuring the correlation between a beam that passed the object and a reference beam. We present a spatial averaging technique that substantially improves the imaging bandwidth of such schemes, which implies that information about high-frequency Fourier components can be observed in the reconstructed diffraction pattern. In the many-photon regime the averaging can be done in parallel and we show that this leads to a much faster convergence of the correlations. We also consider the reconstruction of the object image, and discuss the differences between a pixel-like detector and a bucket detector in the object arm. Finally, it is shown how to non-locally make spatial filtering of a reconstructed image. The results are presented using entangled beams created by parametric down-conversion, but they are general and can be extended also to the important case of using classically correlated thermal-like beams.

DOI
10.1364/opex.12.006067

Related papers

Ghost imaging using homodyne detection

Morten Bache, E. Brambilla, A. Gatti +1 more

We present a theoretical study of ghost imaging based on correlated beams arising from parametric down-conversion, and which uses balanced homodyne detection to measure both the signal and idler fields. We analytically show that the signal-idler correlations contain the full amplitude and phase information about an object located in the signal path, both in the near-field and the far-field case. To this end we discuss how to optimize the optical setups in the two imaging paths, including the crucial point regarding how to engineer the phase of the idler local oscillator as to observe the desired orthogonal quadrature components of the image. As is well known, the near-field image resolution is inherently linked to the far-field bandwidth of the image, determined by the bandwidth of the source of the correlated beams. We show how to circumvent this limitation by using a spatial averaging technique which dramatically improves the imaging bandwidth of the far-field correlations as well as speeds up the convergence rate. The results are backed up by numerical simulations taking into account the finite size and duration of the pump pulse.

arXiv:quant-ph/0402160•Physical Review A•Aug 31, 2004•44 citations

Reduction of Multiplexed Quantum Ghost Images

Dmitriy A. Balakin, Aleksandr V. Belinsky

Ghost imaging allows extracting information about an object from the spatial correlation function between the photons that interacted with an object and the photons in the reference arm(s). The reference beam does not interact with the object; however, it is measured by a CCD matrix. The mathematical method of measurement reduction allows using both the mutual correlations of multiplexed ghost images and prior information about how the image of the research object can look in order to improve the quality of the reconstructed image. The information about the object is the sparsity of its transparency distribution under a given transform. Computer modelling of image reconstruction using multiplexed ghost images formed by four-mode entangled quantum light states confirms the efficiency of the proposed algorithm even with a small number of photons that illuminate the research object.

Moscow University Physics Bulletin•Jan 1, 2019•4 citations

Improvement of the optical image reconstruction based on multiplexed quantum ghost images

Dmitriy A. Balakin, Aleksandr V. Belinsky, A. S. Chirkin

Ghost imaging allows one to obtain information on an object from the spatial correlation function between photons propagating through or reflected from the object and photons of the reference arm. In this case, detection in the object arm is performed over the entire aperture of the beam and, therefore, it does not give information on the object. The reference beam does not interact with the object, but is recorded with a scanning point detector or a CCD array permitting the measurement of the spatial correlation function of photons in two arms. The use of multimode entangled quantum light beams by illuminating the object by one beam and orienting other beams to reference arms makes it possible to obtain simultaneously several ghost images (GIs). Cross correlations of multiplexed GIs (MGIs) are determined by eighth-order field correlation functions. A special algorithm is developed for calculating higher-order correlations of Bose operators. The presence of GI cross correlations is used for improving the quality of the reconstructed object’s image by their processing using the measurement reduction method. An example of the computer simulation of the image reconstruction by MGIs formed in the field of four-frequency entangled quantum states is considered. It is found that in this case the reduced GI has a signal-to-noise ratio several times higher than that of GIs.

Journal of Experimental and Theoretical Physics•Aug 1, 2017•12 citations

High-resolution ghost image and ghost diffraction experiments with incoherent pseudo-thermal light

A. Gatti, Davide Magatti, Morten Bache +3 more

High-resolution ghost image and ghost diffraction are performed by using a single source of pseudo-thermal speckle light divided by a beam splitter. By only operating on the optical setup of the light in the reference arm, that never interacted with the object, we are able to pass from the image to the diffraction pattern. The product of spatial resolutions of the ghost image and ghost diffraction experiments is shown to overcome a limit which was formerly thought to be achievable only with entangled photons. A complementarity between the spatial coherence of the beams and their mutual correlation is demonstrated by showing a complementarity between ghost diffraction and ordinary diffraction patterns.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Aug 18, 2005•3 citations

Quantum Ghost Image Identification with Correlated Photon Pairs

Mehul Malik, Heedeuk Shin, Malcolm N. O’Sullivan +2 more

Ghost imaging can be performed using either quantum or classical states of light that possess strong spatial correlations. In both cases, the image is formed by averaging over many optical events. Here we show that it is possible to distinguish an object from a preestablished basis set of objects by using a small number of position-correlated photon pairs produced by spontaneous parametric down-conversion. The signal photon is incident on one member of a set of spatially nonoverlapping objects. The "ghost" image information is impressed upon the spatially separated idler photon and is extracted by means of holographic filtering and coincidence detection. We were able to distinguish among sets of two and four spatially nonoverlapping objects with confidence levels higher than 87% and 81%, respectively. This method of ghost imaging can be performed in situations requiring extremely low light levels.

Physical Review Letters•Apr 23, 2010•47 citations

Heralded single-photon ghost imaging

Reuben S. Aspden, D. S. Tasca, Robert W. Boyd +1 more

Correlated-photon imaging, popularly known as ghost imaging, is a technique whereby an image is formed from light that has never interacted with the object. In ghost imaging experiments two correlated light fields are produced. One of these fields illuminates the object, and the other field is measured by a spatially resolving detector. In the quantum regime, these correlated light fields are produced by entangled photons created by spontaneous parametric down-conversion. To date, all correlated-photon ghost-imaging experiments have scanned a single-pixel detector through the field of view to obtain the spatial information. However, scanning leads to a poor sampling efficiency, which scales inversely with the number of pixels, N, in the image. In this work we overcome this limitation by using a time-gated camera to record the single-photon events across the full scene. We obtain high-contrast images, 90%, in either the image plane or the far-field of the photon pair source, taking advantage of the EPR-like correlations in position and momentum of the photon pairs. Our images contain a large number of modes, >500, creating opportunities in low-light-level imaging and in quantum information processing.

•Dec 20, 2012•1 citation
In ghost imaging schemes information about an object is extracted by measuring the correlation between a beam that passed the object and a reference beam. We present a spatial averaging technique that substantially improves the imaging bandwidth of such schemes, which implies that information about high-frequency Fourier components can be observed in the reconstructed diffraction pattern. In the many-photon regime the averaging can be done in parallel and we show that this leads to a much faster convergence of the correlations. We also consider the reconstruction of the object image, and discuss the differences between a pixel-like detector and a bucket detector in the object arm. Finally, it is shown how to non-locally make spatial filtering of a reconstructed image. The results are presented using entangled beams created by parametric down-conversion, but they are general and can be extended also to the important case of using classically correlated thermal-like beams.
We present a theoretical study of ghost imaging based on correlated beams arising from parametric down-conversion, and which uses balanced homodyne detection to measure both the signal and idler fields. We analytically show that the signal-idler correlations contain the full amplitude and phase information about an object located in the signal path, both in the near-field and the far-field case. To this end we discuss how to optimize the optical setups in the two imaging paths, including the crucial point regarding how to engineer the phase of the idler local oscillator as to observe the desired orthogonal quadrature components of the image. As is well known, the near-field image resolution is inherently linked to the far-field bandwidth of the image, determined by the bandwidth of the source of the correlated beams. We show how to circumvent this limitation by using a spatial averaging technique which dramatically improves the imaging bandwidth of the far-field correlations as well as speeds up the convergence rate. The results are backed up by numerical simulations taking into account the finite size and duration of the pump pulse.
Ghost imaging allows extracting information about an object from the spatial correlation function between the photons that interacted with an object and the photons in the reference arm(s). The reference beam does not interact with the object; however, it is measured by a CCD matrix. The mathematical method of measurement reduction allows using both the mutual correlations of multiplexed ghost images and prior information about how the image of the research object can look in order to improve the quality of the reconstructed image. The information about the object is the sparsity of its transparency distribution under a given transform. Computer modelling of image reconstruction using multiplexed ghost images formed by four-mode entangled quantum light states confirms the efficiency of the proposed algorithm even with a small number of photons that illuminate the research object.
Ghost imaging allows one to obtain information on an object from the spatial correlation function between photons propagating through or reflected from the object and photons of the reference arm. In this case, detection in the object arm is performed over the entire aperture of the beam and, therefore, it does not give information on the object. The reference beam does not interact with the object, but is recorded with a scanning point detector or a CCD array permitting the measurement of the spatial correlation function of photons in two arms. The use of multimode entangled quantum light beams by illuminating the object by one beam and orienting other beams to reference arms makes it possible to obtain simultaneously several ghost images (GIs). Cross correlations of multiplexed GIs (MGIs) are determined by eighth-order field correlation functions. A special algorithm is developed for calculating higher-order correlations of Bose operators. The presence of GI cross correlations is used for improving the quality of the reconstructed object’s image by their processing using the measurement reduction method. An example of the computer simulation of the image reconstruction by MGIs formed in the field of four-frequency entangled quantum states is considered. It is found that in this case the reduced GI has a signal-to-noise ratio several times higher than that of GIs.
High-resolution ghost image and ghost diffraction are performed by using a single source of pseudo-thermal speckle light divided by a beam splitter. By only operating on the optical setup of the light in the reference arm, that never interacted with the object, we are able to pass from the image to the diffraction pattern. The product of spatial resolutions of the ghost image and ghost diffraction experiments is shown to overcome a limit which was formerly thought to be achievable only with entangled photons. A complementarity between the spatial coherence of the beams and their mutual correlation is demonstrated by showing a complementarity between ghost diffraction and ordinary diffraction patterns.
Ghost imaging can be performed using either quantum or classical states of light that possess strong spatial correlations. In both cases, the image is formed by averaging over many optical events. Here we show that it is possible to distinguish an object from a preestablished basis set of objects by using a small number of position-correlated photon pairs produced by spontaneous parametric down-conversion. The signal photon is incident on one member of a set of spatially nonoverlapping objects. The "ghost" image information is impressed upon the spatially separated idler photon and is extracted by means of holographic filtering and coincidence detection. We were able to distinguish among sets of two and four spatially nonoverlapping objects with confidence levels higher than 87% and 81%, respectively. This method of ghost imaging can be performed in situations requiring extremely low light levels.
Correlated-photon imaging, popularly known as ghost imaging, is a technique whereby an image is formed from light that has never interacted with the object. In ghost imaging experiments two correlated light fields are produced. One of these fields illuminates the object, and the other field is measured by a spatially resolving detector. In the quantum regime, these correlated light fields are produced by entangled photons created by spontaneous parametric down-conversion. To date, all correlated-photon ghost-imaging experiments have scanned a single-pixel detector through the field of view to obtain the spatial information. However, scanning leads to a poor sampling efficiency, which scales inversely with the number of pixels, N, in the image. In this work we overcome this limitation by using a time-gated camera to record the single-photon events across the full scene. We obtain high-contrast images, 90%, in either the image plane or the far-field of the photon pair source, taking advantage of the EPR-like correlations in position and momentum of the photon pairs. Our images contain a large number of modes, >500, creating opportunities in low-light-level imaging and in quantum information processing.