Postselected quantum computation is distinguished from regular quantum computation by accepting the output only if measurement outcomes satisfy predetermined conditions. The output must be accepted with nonzero probability. Methods for implementing postselected quantum computation with noisy gates are proposed. These methods are based on error-detecting codes. Conditionally on detecting no errors, it is expected that the encoded computation can be made to be arbitrarily accurate. Although the probability of success of the encoded computation decreases dramatically with accuracy, it is possible to apply the proposed methods to the problem of preparing arbitrary stabilizer states in large error-correcting codes with local residual errors. Together with teleported error-correction, this may improve the error tolerance of non-postselected quantum computation.
Postselected quantum computation is distinguished from regular quantum computation by accepting the output only if measurement outcomes satisfy predetermined conditions. The output must be accepted with nonzero probability. Methods for implementing postselected quantum computation with noisy gates are proposed. These methods are based on error-detecting codes. Conditionally on detecting no errors, it is expected that the encoded computation can be made to be arbitrarily accurate. Although the probability of success of the encoded computation decreases dramatically with accuracy, it is possible to apply the proposed methods to the problem of preparing arbitrary stabilizer states in large error-correcting codes with local residual errors. Together with teleported error-correction, this may improve the error tolerance of non-postselected quantum computation.
This thesis is concerned with certain theoretical problems that arise naturally in the context of fault-tolerant quantum computation. Fault-tolerance can be defined as the art of building reliable devices from unreliable components, and is of particular importance for quantum computers that aim to precisely control the dynamics of extremely sensitive quantum systems. A model of quantum computation is a specification of the basic building blocks by which a quantum computation is implemented. The best known model is the quantum circuit model, where computations are implemented by means of unitary quantum gates that are applied to two-level quantum systems known as qubits. In a physical implementation of a quantum circuit, the gates and qubits will inevitably be affected by noise. Fault-tolerant quantum circuits are designed to be resilient against the effects of this noise, provided that it is not too strong. Fault-tolerance in the quantum circuit model is well developed thanks to the theory of quantum error-correcting codes. These codes allow for the correction of small numbers of errors introduced by a variety of noise processes. In a fault-tolerant quantum circuit, qubits are replaced with encoded qubits, and quantum gates with encoded gates that are immediately followed by special quantum circuits for error correction. Provided the rate at which errors occur is below a constant threshold value, the accumulation of errors can be checked so that the correct output of the computation correctly determined. The threshold acts as both a measure of how good the design of a quantum circuit is, and also as a target for experimenters aiming to implement quantum circuits. Much current research in quantum computation is aimed at designing quantum circuits that increase the noise threshold, hopefully to the point where it becomes within the reach of experimenters. A fault-tolerant encoded quantum gate must limit the propagation of errors so that the code’s corrective capabilities are not overwhelmed. It is not so easy to design encoded gates that satisfy this property, and to date only a finite handful of such gates are known. In a faulttolerant quantum circuit, all quantum gates must be decomposed or compiled in terms of those that may be implemented fault-tolerantly. In the first part of this thesis, we present two results that may be applied to this problem of gate compilation. The first is a generic method based on the Solovay-Kitaev theorem that may be applied to all quantum gates, but is most effective for those that act on single qubits. We present the Solovay-Kitaev theorem in its simples known form as an algorithm, together with novel constructions that can be used to implement it. Following this we give a two specialized methods for two-qubit gate decomposition, based on the Cartan decomposition of the Lie group SU(4). The cluster-state model of computation is an alternative to the quantum circuit model, and makes use of quantum measurements and highly entangled cluster-states to implement a quantum computation. The fault-tolerant techniques developed for quantum circuits are not immediately applicable in this model, so in order for it to be a realistic candidate for performing computations we prove that such techniques are possible. In the second part of the thesis we prove that constant fault-tolerance thresholds may be achieved in the cluster-state model, and in particular in an adaption to an optical implementation. Following this we design a complete error correction scheme for optical cluster-state computation, and numerically determine the threshold of this model in the face of the dominant noise models likely to affect such an implementation.
We prove an accuracy threshold theorem for fault-tolerant quantum computation based on error detection and postselection. Our proof provides a rigorous foundation for the scheme suggested by Knill, in which preparation circuits for ancilla states are protected by a concatenated error-detecting code and the preparation is aborted if an error is detected. The proof applies to independent stochastic noise but (in contrast to proofs of the quantum accuracy threshold theorem based on concatenated error-correcting codes) not to strongly-correlated adversarial noise. Our rigorously established lower bound on the accuracy threshold, 1.04×10−3, is well below Knill's numerical estimates.
Quantum computers promise to solve computational problems that are inaccessible to classical machines. The reliable execution of large-scale quantum algorithms requires robust operations in the presence of noise. Quantum error correction addresses this challenge by encoding quantum information redundantly across several physical qubits, such that errors can be detected and corrected during a computation. However, no single error-correcting code intrinsically supports an inherently robust, fault-tolerant implementation of all gates needed for universal quantum computing. Moreover, most modern approaches to both quantum error correction and the implementation of universal logical operations on encoded qubits rely on mid-circuit measurements and feed-forward control. These types of operations are technologically demanding, often slow, and prone to high error rates, and they limit the overall success probability of quantum algorithms. In this thesis, we develop fault-tolerant protocols and circuits for quantum error correction and universal logical computation, with an emphasis on implementations compatible with current hardware systems. We first focus on fault-tolerant quantum error correction on small codes. By comparing different protocols, we identify trade-offs between compact circuit constructions and their robustness to noise. We then assess their practical performance by comparing numerical simulations of noisy circuits with experimental data. Beyond the preservation of encoded information, we study how universal logic can be implemented in a fault-tolerant manner on encoded qubits. A central approach considered in this thesis is code switching, in which logical information is transferred between two distinct error-correcting codes that support complementary sets of inherently fault-tolerant logical gates. In combination, these codes give access to a complete universal fault-tolerant logical gate set. In this thesis, we determine conditions that allow us to construct fault-tolerant protocols for code switching. We adapt these protocols to the capabilities of current hardware, thereby enabling the first experimental realization of universal fault-tolerant logic by means of code switching. However, the overall performance of these schemes is limited by slow and noisy mid-circuit measurements. To address this bottleneck, we construct a suite of measurement-free fault-tolerant universal operations that do not require any measurements during the execution of an algorithm. In this framework, error correction and logical operations are implemented coherently as part of the quantum circuit, without mid-circuit measurements or in-sequence classical control. We introduce measurement-free code-switching schemes that can be scaled to arbitrary code distances through concatenation, and which thereby provide, in principle, arbitrarily strong error suppression. We further tailor our approach to the capabilities of current trapped-ion quantum processors. New circuit constructions support the first experimental implementation of a logical quantum algorithm without mid-circuit measurements, demonstrated through Grover's search on three encoded qubits. Together, the results of this thesis expand the toolbox for early fault-tolerant quantum computation. They show how protocols for quantum error correction and universal logical gates can be designed without mid-circuit measurements with realistic hardware constraints in mind, opening new pathways towards universal quantum logic.
Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.
Many current quantum error-correcting codes that achieve full fault tolerance suffer from having low ratios of logical to physical qubits and significant overhead. This makes them difficult to implement on current noisy intermediate-scale quantum (NISQ) computers and results in the inability to perform quantum algorithms at useful scales with near-term quantum processors. As a result, calculations are generally done without encoding. We propose a middle ground between these two approaches: constructions in the [[n,n−2,2]] quantum error-detecting code that can detect any error from a single faulty gate by measuring the stabilizer generators of the code and additional ancillas at the end of the computation. This achieves weak fault tolerance. As we show, this yields a significant improvement over no error correction for small computations with low enough physical error probabilities and requires much less overhead than codes that achieve full fault tolerance. We give constructions for a set of gates that achieve universal quantum computation in this error-detecting code, while satisfying weak fault tolerance up to analog imprecision on the physical rotation gate.
Correcting errors is a vital but expensive component of fault tolerant quantum computation. Standard fault tolerant protocol assumes the implementation of error correction, via syndrome measurements and possible recovery operations, after every quantum gate. In fact, this is not necessary. Here we demonstrate that error correction should be applied more sparingly. We simulate encoded single qubit rotations within the [7,1,3] code and show via fidelity measures that applying error correction after every gate is not desirable. The simulations also shed light on what accuracy can be expected for noisy error correction and thus to what accuracy arbitrary single qubit rotations should be implemented.