We present a theoretical and experimental study of the damping process of the atomic velocity in Sisyphus cooling. The relaxation rates of the atomic kinetic temperature are determined for a three-dimensional lin⊥lin optical lattice. We find that the damping rates of the atomic temperature depend linearly on the optical pumping rate, for a given depth of the potential wells. This is at variance with the behavior of the friction coefficient as calculated from the spatial diffusion coefficients within a model of Brownian motion. The origin of this different behavior is identified by distinguishing the role of the trapped and traveling atoms.
We present a theoretical and experimental study of the damping process of the atomic velocity in Sisyphus cooling. The relaxation rates of the atomic kinetic temperature are determined for a three-dimensional lin⊥lin optical lattice. We find that the damping rates of the atomic temperature depend linearly on the optical pumping rate, for a given depth of the potential wells. This is at variance with the behavior of the friction coefficient as calculated from the spatial diffusion coefficients within a model of Brownian motion. The origin of this different behavior is identified by distinguishing the role of the trapped and traveling atoms.
In this thesis, detailed experimental studies and numerical simulations are presented of laser cooling mechanisms in dissipative optical lattices and results of the first realized three dimensional Brownian motor in optical lattices. A dissipative optical lattice is a periodic light shift potential, created in the interference patterns of laser beams. In this, atoms can be both cooled and trapped, and the most important relaxation mechanism is generally considered to be “Sisyphus cooling”. However, careful experimental and theoretical investigations indicate the presence of other cooling processes as well. This is studied by varying different parameters such as irradiance and frequency of the lattice light. The time evolution of atoms in optical lattices show strong evidence of a bimodal velocity distribution, where a population transfer between one mode containing “hot” atoms and one mode containing “cold” atoms is evident. The normal diffusion of atoms in optical lattices is characterized by isotrop random fluctuations and exhibit the nature of Brownian motion. We have realized a technique where this motion is rectified and controlled. This is done in a three dimensional double optical lattice. This Brownian motor has control properties for both its speed and its direction in three dimensions. Our three dimensional double optical lattice is created by using laser light, exploiting two transitions, in the D2 line of cesium. Two three dimensional optical lattices are spatially overlapped; each optical lattice traps atoms in one of two hyperfine ground states. The controllability comes about by inducing phase shifts in the lattice laser beams, which displace the lattices relative to each other. This type of highly controlled Brownian motor is of fundamental interest since Brownian motion is present in almost all systems and for the role they play in protein motors and the function of living cells, and for the potential applications in nanotechnology. Brownian motors of this kind also open the way to possible studies of quantum Brownian motors and quantum resonances that are predicted for atomic ratchets. Optical lattices, and especially double optical lattices, have also been suggested as a platform for quantum state manipulations due to the good isolation from environment and ambient effects. Most of the work in this thesis is a first step towards the implementation of quantum manipulation schemes in a double optical lattice.
A complete laser cooling setup was built, with focus on threedimensional near-resonant optical lattices for cesium. These consist of regularly ordered micropotentials, created by the interference of four laser beams. One key feature of optical lattices is an inherent ”Sisyphus cooling” process. It efficiently extracts kinetic energy from the atoms, leading to equilibrium temperatures of a few µK. The corresponding kinetic energy is lower than the depth of the potential wells, so that atoms can be trapped.We performed detailed studies of the cooling processes in optical lattices by using the time-of-flight and absorption-imaging techniques. We investigated the dependence of the equilibrium temperature on the optical lattice parameters, such as detuning, optical potential and lattice geometry. The presence of neighbouring transitions in the cesium hyperfine level structure was used to break symmetries in order to identify, which role “red” and “blue” transitions play in the cooling. We also examined the limits for the cooling process in optical lattices, and the possible difference in steady-state velocity distributions for different directions. Moreover, in collaboration with ´Ecole Normale Sup´erieure in Paris, numerical simulations were performed in order to get more insight in the cooling dynamics of optical lattices.Optical lattices can keep atoms almost perfectly isolated from the environment and have therefore been suggested as a platform for a host of possible experiments aimed at coherent quantum manipulations, such as spin-squeezing and the implementation of quantum logic-gates. We developed a novel way to trap two different cesium ground states in two distinct, interpenetrating optical lattices, and to change the distance between sites of one lattice relative to sites of the other lattice. This is a first step towards the implementation of quantum simulation schemes in optical lattices.
In this thesis, detailed experimental studies and numerical simulations are presented of laser cooling mechanisms in dissipative optical lattices and results of the first realized three dimensional Brownian motor in optical lattices. A dissipative optical lattice is a periodic light shift potential, created in the interference patterns of laser beams. In this, atoms can be both cooled and trapped, and the most important relaxation mechanism is generally considered to be “Sisyphus cooling”. However, careful experimental and theoretical investigations indicate the presence of other cooling processes as well. This is studied by varying different parameters such as irradiance and frequency of the lattice light. The time evolution of atoms in optical lattices show strong evidence of a bimodal velocity distribution, where a population transfer between one mode containing “hot” atoms and one mode containing “cold” atoms is evident. The normal diffusion of atoms in optical lattices is characterized by isotrop random fluctuations and exhibit the nature of Brownian motion. We have realized a technique where this motion is rectified and controlled. This is done in a three dimensional double optical lattice. This Brownian motor has control properties for both its speed and its direction in three dimensions. Our three dimensional double optical lattice is created by using laser light, exploiting two transitions, in the D2 line of cesium. Two three dimensional optical lattices are spatially overlapped; each optical lattice traps atoms in one of two hyperfine ground states. The controllability comes about by inducing phase shifts in the lattice laser beams, which displace the lattices relative to each other. This type of highly controlled Brownian motor is of fundamental interest since Brownian motion is present in almost all systems and for the role they play in protein motors and the function of living cells, and for the potential applications in nanotechnology. Brownian motors of this kind also open the way to possible studies of quantum Brownian motors and quantum resonances that are predicted for atomic ratchets. Optical lattices, and especially double optical lattices, have also been suggested as a platform for quantum state manipulations due to the good isolation from environment and ambient effects. Most of the work in this thesis is a first step towards the implementation of quantum manipulation schemes in a double optical lattice.
The semiclassical theory of laser cooling is applied for the analysis of cooling of unbound atoms with the values of the ground and exited state angular moments 1/2 in a one-dimensional nondissipative optical lattice. We show that in the low-saturation limit with respect to the pumping field a qualitative interpretation of the cooling mechanisms can be made by the consideration of effective two-level system of the ground-state sublevels. It is clarified that in the limit of weak Raman transitions the cooling mechanism is similar to the Doppler mechanism, which is known in the theory of two-level atom. In the limit of strong Raman transitions the cooling mechanism is similar to the known Sisyphus mechanism. In the slow atom approximation the analytical expressions for the coefficients of friction, spontaneous and induced diffusion are given, and the kinetic temperature is estimated.
This thesis includes both experimental and theoretical investigations of fluctuation-induced transport phenomena, presented in a series of nine papers, by studies of the dynamics of cold atoms in dissipative optical lattices. With standard laser cooling techniques about 108 cesium atoms are accumulated, cooled to a few μK, and transferred into a dissipative optical lattice. An optical lattice is a periodic light-shift potential, and in dissipative optical lattice the light field is sufficiently close to resonance for incoherent light scattering to be of importance. This provides the system with a diffusive force, but also with a friction through laser cooling mechanisms. In the dissipative optical lattices the friction and the diffusive force will eventually reach a steady state. At steady state, the thermal energy is low enough, compared to the potential depth, for the atoms to be localized close to the potential minima, but high enough for the atoms to occasionally make inter-well flights. This leads to a Brownian motion of the atoms in the optical lattices. In the normal case these random walks average to zero, leading to a symmetric, isotropic diffusion of the atoms. If the optical lattices are tilted, the symmetry is broken and the diffusion will be biased. This leads to a fluctuation-induced drift of the atoms. In this thesis an investigation of such drifts, for an optical lattice tilted by the gravitational force, is presented. We show that even though the tilt over a potential period is small compared to the potential depth, it clearly affect the dynamics of the atoms, and despite the complex details of the system it can, to a good approximation, be described by the Langevin equation formalism for a particle in a periodic potential. The linear drifts give evidence of stop-and-go dynamics where the atoms escape the potential wells and travel over one or more wells before being recaptured. Brownian motors open the possibility of creating fluctuation-induced drifts in the absence of bias forces, if two requirements are fulfilled: the symmetry has to be broken and the system has to be brought out of thermal equilibrium. By utilizing two distinguishable optical lattices, with a relative spatial phase and unequal transfer rates between them, these requirements can be fulfilled. In this thesis, such a Brownian motor is realized, and drifts in arbitrary directions in 3D are demonstrated. We also demonstrate a real-time steering of the transport as well as drifts along pre-designed paths. Moreover, we present measurements and discussions of performance characteristics of the motor, and we show that the required asymmetry can be obtained in multiple ways.
A complete laser cooling setup was built, with focus on threedimensional near-resonant optical lattices for cesium. These consist of regularly ordered micropotentials, created by the interference of four laser beams. One key feature of optical lattices is an inherent ”Sisyphus cooling” process. It efficiently extracts kinetic energy from the atoms, leading to equilibrium temperatures of a few µK. The corresponding kinetic energy is lower than the depth of the potential wells, so that atoms can be trapped. We performed detailed studies of the cooling processes in optical lattices by using the time-of-flight and absorption-imaging techniques. We investigated the dependence of the equilibrium temperature on the optical lattice parameters, such as detuning, optical potential and lattice geometry. The presence of neighbouring transitions in the cesium hyperfine level structure was used to break symmetries in order to identify, which role “red” and “blue” transitions play in the cooling. We also examined the limits for the cooling process in optical lattices, and the possible difference in steady-state velocity distributions for different directions. Moreover, in collaboration with ´Ecole Normale Sup´erieure in Paris, numerical simulations were performed in order to get more insight in the cooling dynamics of optical lattices. Optical lattices can keep atoms almost perfectly isolated from the environment and have therefore been suggested as a platform for a host of possible experiments aimed at coherent quantum manipulations, such as spin-squeezing and the implementation of quantum logic-gates. We developed a novel way to trap two different cesium ground states in two distinct, interpenetrating optical lattices, and to change the distance between sites of one lattice relative to sites of the other lattice. This is a first step towards the implementation of quantum simulation schemes in optical lattices.