This thesis includes both experimental and theoretical investigations of fluctuation-induced transport phenomena, presented in a series of nine papers, by studies of the dynamics of cold atoms in dissipative optical lattices. With standard laser cooling techniques about 108 cesium atoms are accumulated, cooled to a few μK, and transferred into a dissipative optical lattice. An optical lattice is a periodic light-shift potential, and in dissipative optical lattice the light field is sufficiently close to resonance for incoherent light scattering to be of importance. This provides the system with a diffusive force, but also with a friction through laser cooling mechanisms. In the dissipative optical lattices the friction and the diffusive force will eventually reach a steady state. At steady state, the thermal energy is low enough, compared to the potential depth, for the atoms to be localized close to the potential minima, but high enough for the atoms to occasionally make inter-well flights. This leads to a Brownian motion of the atoms in the optical lattices. In the normal case these random walks average to zero, leading to a symmetric, isotropic diffusion of the atoms. If the optical lattices are tilted, the symmetry is broken and the diffusion will be biased. This leads to a fluctuation-induced drift of the atoms. In this thesis an investigation of such drifts, for an optical lattice tilted by the gravitational force, is presented. We show that even though the tilt over a potential period is small compared to the potential depth, it clearly affect the dynamics of the atoms, and despite the complex details of the system it can, to a good approximation, be described by the Langevin equation formalism for a particle in a periodic potential. The linear drifts give evidence of stop-and-go dynamics where the atoms escape the potential wells and travel over one or more wells before being recaptured. Brownian motors open the possibility of creating fluctuation-induced drifts in the absence of bias forces, if two requirements are fulfilled: the symmetry has to be broken and the system has to be brought out of thermal equilibrium. By utilizing two distinguishable optical lattices, with a relative spatial phase and unequal transfer rates between them, these requirements can be fulfilled. In this thesis, such a Brownian motor is realized, and drifts in arbitrary directions in 3D are demonstrated. We also demonstrate a real-time steering of the transport as well as drifts along pre-designed paths. Moreover, we present measurements and discussions of performance characteristics of the motor, and we show that the required asymmetry can be obtained in multiple ways.
This thesis includes both experimental and theoretical investigations of fluctuation-induced transport phenomena, presented in a series of nine papers, by studies of the dynamics of cold atoms in dissipative optical lattices. With standard laser cooling techniques about 108 cesium atoms are accumulated, cooled to a few μK, and transferred into a dissipative optical lattice. An optical lattice is a periodic light-shift potential, and in dissipative optical lattice the light field is sufficiently close to resonance for incoherent light scattering to be of importance. This provides the system with a diffusive force, but also with a friction through laser cooling mechanisms. In the dissipative optical lattices the friction and the diffusive force will eventually reach a steady state. At steady state, the thermal energy is low enough, compared to the potential depth, for the atoms to be localized close to the potential minima, but high enough for the atoms to occasionally make inter-well flights. This leads to a Brownian motion of the atoms in the optical lattices. In the normal case these random walks average to zero, leading to a symmetric, isotropic diffusion of the atoms. If the optical lattices are tilted, the symmetry is broken and the diffusion will be biased. This leads to a fluctuation-induced drift of the atoms. In this thesis an investigation of such drifts, for an optical lattice tilted by the gravitational force, is presented. We show that even though the tilt over a potential period is small compared to the potential depth, it clearly affect the dynamics of the atoms, and despite the complex details of the system it can, to a good approximation, be described by the Langevin equation formalism for a particle in a periodic potential. The linear drifts give evidence of stop-and-go dynamics where the atoms escape the potential wells and travel over one or more wells before being recaptured. Brownian motors open the possibility of creating fluctuation-induced drifts in the absence of bias forces, if two requirements are fulfilled: the symmetry has to be broken and the system has to be brought out of thermal equilibrium. By utilizing two distinguishable optical lattices, with a relative spatial phase and unequal transfer rates between them, these requirements can be fulfilled. In this thesis, such a Brownian motor is realized, and drifts in arbitrary directions in 3D are demonstrated. We also demonstrate a real-time steering of the transport as well as drifts along pre-designed paths. Moreover, we present measurements and discussions of performance characteristics of the motor, and we show that the required asymmetry can be obtained in multiple ways.
In this thesis, detailed experimental studies and numerical simulations are presented of laser cooling mechanisms in dissipative optical lattices and results of the first realized three dimensional Brownian motor in optical lattices. A dissipative optical lattice is a periodic light shift potential, created in the interference patterns of laser beams. In this, atoms can be both cooled and trapped, and the most important relaxation mechanism is generally considered to be “Sisyphus cooling”. However, careful experimental and theoretical investigations indicate the presence of other cooling processes as well. This is studied by varying different parameters such as irradiance and frequency of the lattice light. The time evolution of atoms in optical lattices show strong evidence of a bimodal velocity distribution, where a population transfer between one mode containing “hot” atoms and one mode containing “cold” atoms is evident. The normal diffusion of atoms in optical lattices is characterized by isotrop random fluctuations and exhibit the nature of Brownian motion. We have realized a technique where this motion is rectified and controlled. This is done in a three dimensional double optical lattice. This Brownian motor has control properties for both its speed and its direction in three dimensions. Our three dimensional double optical lattice is created by using laser light, exploiting two transitions, in the D2 line of cesium. Two three dimensional optical lattices are spatially overlapped; each optical lattice traps atoms in one of two hyperfine ground states. The controllability comes about by inducing phase shifts in the lattice laser beams, which displace the lattices relative to each other. This type of highly controlled Brownian motor is of fundamental interest since Brownian motion is present in almost all systems and for the role they play in protein motors and the function of living cells, and for the potential applications in nanotechnology. Brownian motors of this kind also open the way to possible studies of quantum Brownian motors and quantum resonances that are predicted for atomic ratchets. Optical lattices, and especially double optical lattices, have also been suggested as a platform for quantum state manipulations due to the good isolation from environment and ambient effects. Most of the work in this thesis is a first step towards the implementation of quantum manipulation schemes in a double optical lattice.
In this thesis, detailed experimental studies and numerical simulations are presented of laser cooling mechanisms in dissipative optical lattices and results of the first realized three dimensional Brownian motor in optical lattices. A dissipative optical lattice is a periodic light shift potential, created in the interference patterns of laser beams. In this, atoms can be both cooled and trapped, and the most important relaxation mechanism is generally considered to be “Sisyphus cooling”. However, careful experimental and theoretical investigations indicate the presence of other cooling processes as well. This is studied by varying different parameters such as irradiance and frequency of the lattice light. The time evolution of atoms in optical lattices show strong evidence of a bimodal velocity distribution, where a population transfer between one mode containing “hot” atoms and one mode containing “cold” atoms is evident. The normal diffusion of atoms in optical lattices is characterized by isotrop random fluctuations and exhibit the nature of Brownian motion. We have realized a technique where this motion is rectified and controlled. This is done in a three dimensional double optical lattice. This Brownian motor has control properties for both its speed and its direction in three dimensions. Our three dimensional double optical lattice is created by using laser light, exploiting two transitions, in the D2 line of cesium. Two three dimensional optical lattices are spatially overlapped; each optical lattice traps atoms in one of two hyperfine ground states. The controllability comes about by inducing phase shifts in the lattice laser beams, which displace the lattices relative to each other. This type of highly controlled Brownian motor is of fundamental interest since Brownian motion is present in almost all systems and for the role they play in protein motors and the function of living cells, and for the potential applications in nanotechnology. Brownian motors of this kind also open the way to possible studies of quantum Brownian motors and quantum resonances that are predicted for atomic ratchets. Optical lattices, and especially double optical lattices, have also been suggested as a platform for quantum state manipulations due to the good isolation from environment and ambient effects. Most of the work in this thesis is a first step towards the implementation of quantum manipulation schemes in a double optical lattice.
In this thesis, both experimental studies and numerical simulations of ultracold atoms in optical potentials are presented in a collection of nine scientific papers. In particular, noise-induced transport in dissipative optical lattices and superfluid properties of Bose-Einstein condensates have been studied. Noise is usually regarded as a complication to most systems and as something that needs to be minimized. However, in a series of experiments at Umeå University, noise has been shown to play a key role for laser-cooled cesium atoms trapped in dissipative optical lattices. By using a combination of two dissipative optical lattices, where the relative spatial phase between them can be controlled, a so-called Brownian motor can be realized, where energy can be extracted from the inherent noise. In the experiment, this energy is used to control the transport of the laser-cooled atoms in real time and along pre-designed paths. This thesis also presents a way to characterize this system in terms of energy conversion efficiency and coherence of the transport, which may allow for a more straightforward comparison with other systems that rely on noise rectification. In the studies, it is also shown that the noise triggers a downward drift due to gravity, even though the optical potential should support the atoms. Further investigation of this might help to understand the underlying principles of laser cooling, as well as showing that the system might be suitable as a flexible test bed for statistical physics. In close relation to the experimental system, two numerical simulations are also presented, one in which different ways to induce asymmetries between two periodic potentials are investigated, and one in which a proposal for detecting quantum walks is explored. In the second part of the thesis, a work from the Joint Quantum Institute is presented, where a long-lived persistent current in a toroidal Bose-Einstein condensate, held in an all-optical trap, is created. The critical velocity of the superflow is measured in the presence of a tunable barrier. The system can be seen as a first realization of an elementary closed-loop atom circuit. Finally a theoretical study of the crossover between one- and two-dimensional systems is presented, in particular the transition between a two-dimensional superfluid to a one-dimensional Mott insulator is investigated.
The central theme of this thesis is the directed transport of cold atoms in optical lattices. Several methods for producing such an outcome are proposed, experimentally realised and characterised, in both dissipative and non-dissipative regimes. Accordingly, this thesis may be thought to be composed of two parts. The first section reports results of directed transport in non-dissipative optical lattices, where we used the atom optics realisation of the delta-kicked rotor (DKR) as a model system. Initial experiments performed on this system showed evidence of dynamical localisation, the signature of quantum chaos, and we exploited the presence of the momentum boundary (a barrier to diffusion arising from the approximation of delta-kicks with finite width impulses) to produce asymmetric momentum diffusion. Breaking the DKR system symmetries produced directed diffusion due to chaotic dynamics alone. We observed directed transport in a spatially symmetric system whenever temporal symmetry was broken, and also when the spatial and temporal symmetry of the DKR were simultaneously broken. We also report the first experimental evidence for a 'double-DKR', where experiments performed using a kick sequence composed of closely spaced pairs of kicks instead of single kicks caused significant alterations in the observed behaviour of the kicked rotor system. The origin of this new behaviour was explained in the framework of kick-to-kick correlations and our results were found to be in excellent agreement with numerical simulations. The second part of this thesis describes the realisation of a Brownian ratchet in a 3D dissipative lattice, where fluctuations between different potential surfaces acted as the source of noise. These fluctuations were rectified by the application of a periodic, bi-harmonic driving force, which broke the temporal symmetry of the system. Both current reversal and stochastic resonance behaviour characteristic of a Brownian ratchet were observed.
Cold atoms in optical lattices are an ideal test bed to explore ratchet physics. This is largely due to the extreme tunability of optical lattice systems, which allows one to precisely control the shape of the potential and of any applied force, as well as to vary at will the level of dissipation. Since the very first demonstration of directed motion in a cold atom system by Mennerat-Robilliard et al. (1999), a number of experimental investigations with cold atoms in optical lattices have explored different aspects of the physics of ratchets. Here, the focus is first on the experiments in the classical regime which explored the relationship between symmetry and transport in a.c. driven ratchets. Experiments in the full quantum Hamiltonian regime are then described, and the unique features of such a regime highlighted. Ratchets in dissipative optical lattices Dissipative optical lattices Optical lattices are periodic potentials for atoms created by the interference of two or more laser fields.The detuning between the laser fields and the nearest atomic transition will emerge as a key parameter to describe the light–atom interaction. It is thus important to distinguish two very different situations: the case of fardetuned laser fields, and the case of near-resonant laser fields. For far-detuned laser fields, a purely conservative potential is produced. As will be discussed in the following sections, far-detuned optical lattices are ideal to model Hamiltonian systems. In the case of near-resonant laser fields, the interaction between the laser and the atoms may lead, under appropriate conditions, to dissipative dynamics. That is, for an appropriately arranged set of near-resonant optical lattices, a dissipative optical lattice, is produced, where the set of laser fields produce at once the periodic potential acting on the atoms and the cooling mechanism, which decreases their kinetic energy and lead to the trapping of the atoms at the bottom of potential wells. The principles behind the cooling mechanism, termed Sisyphus cooling for reasons which will become apparent in the following discussion, can be captured by considering the minimal configuration of a one-dimensional optical lattice and a J g = 1 / 2 → J e = 3 / 2 atomic transition. This is the simplest configuration in which Sisyphus cooling takes place.
Optical lattices are periodic arrangements of laser cooled atoms trapped in potentials created by the interference of multiple laser beams. In this dissertation, we describe a series of experiments performed using optical lattices that exploit the coherence of atoms and we also look at new ways to cool the atoms. With a sudden shift of the optical lattice, atomic wavepackets can be created that evolve much like a classical particle. Using a photon redistribution technique, we have characterized the oscillation of wavepackets in the anharmonic potential wells. Atoms will quantum mechanically tunnel between lattice sites with a sufficiently shallow potential. Due to the structure of the optical lattices that are used, while the atom is tunneling, its internal angular momentum state must change. We use this change to detect and characterize the tunneling. The change in internal state leads to the formation of a new potential that acts on the atom, which is known as a gauge potential, which does not depend on the light intensity, but depends only on the geometry of the lattice. We have for the first time measured and characterized this gauge potential. Finally, by randomly modulating the lattice potential, we have demonstrated that tunneling can be suppressed. We have shown that an enhancement of the Sisyphus cooling process, which localizes atoms in the wells of an optical lattice, is possible using a bichromatic standing wave. A time of flight technique is used to verify the cooling improvement. We combine the techniques developed in these experiments and apply them to the cooling of the trapped atoms using a feedback mechanism, which is analogous to the well known technique of stochastic cooling in the field of beam physics. Lastly, we have laid the theoretical basis for using the ponderomotive force to create optical lattices for laser cooled Rydberg atoms. Rydberg atoms are attractive because of their many extreme properties, and the ability to trap Rydberg atoms into lattice sites will increase the range of experiments and measurements that can be made with them.