Optical lattices are periodic arrangements of laser cooled atoms trapped in potentials created by the interference of multiple laser beams. In this dissertation, we describe a series of experiments performed using optical lattices that exploit the coherence of atoms and we also look at new ways to cool the atoms. With a sudden shift of the optical lattice, atomic wavepackets can be created that evolve much like a classical particle. Using a photon redistribution technique, we have characterized the oscillation of wavepackets in the anharmonic potential wells. Atoms will quantum mechanically tunnel between lattice sites with a sufficiently shallow potential. Due to the structure of the optical lattices that are used, while the atom is tunneling, its internal angular momentum state must change. We use this change to detect and characterize the tunneling. The change in internal state leads to the formation of a new potential that acts on the atom, which is known as a gauge potential, which does not depend on the light intensity, but depends only on the geometry of the lattice. We have for the first time measured and characterized this gauge potential. Finally, by randomly modulating the lattice potential, we have demonstrated that tunneling can be suppressed. We have shown that an enhancement of the Sisyphus cooling process, which localizes atoms in the wells of an optical lattice, is possible using a bichromatic standing wave. A time of flight technique is used to verify the cooling improvement. We combine the techniques developed in these experiments and apply them to the cooling of the trapped atoms using a feedback mechanism, which is analogous to the well known technique of stochastic cooling in the field of beam physics. Lastly, we have laid the theoretical basis for using the ponderomotive force to create optical lattices for laser cooled Rydberg atoms. Rydberg atoms are attractive because of their many extreme properties, and the ability to trap Rydberg atoms into lattice sites will increase the range of experiments and measurements that can be made with them.
Optical lattices are periodic arrangements of laser cooled atoms trapped in potentials created by the interference of multiple laser beams. In this dissertation, we describe a series of experiments performed using optical lattices that exploit the coherence of atoms and we also look at new ways to cool the atoms. With a sudden shift of the optical lattice, atomic wavepackets can be created that evolve much like a classical particle. Using a photon redistribution technique, we have characterized the oscillation of wavepackets in the anharmonic potential wells. Atoms will quantum mechanically tunnel between lattice sites with a sufficiently shallow potential. Due to the structure of the optical lattices that are used, while the atom is tunneling, its internal angular momentum state must change. We use this change to detect and characterize the tunneling. The change in internal state leads to the formation of a new potential that acts on the atom, which is known as a gauge potential, which does not depend on the light intensity, but depends only on the geometry of the lattice. We have for the first time measured and characterized this gauge potential. Finally, by randomly modulating the lattice potential, we have demonstrated that tunneling can be suppressed. We have shown that an enhancement of the Sisyphus cooling process, which localizes atoms in the wells of an optical lattice, is possible using a bichromatic standing wave. A time of flight technique is used to verify the cooling improvement. We combine the techniques developed in these experiments and apply them to the cooling of the trapped atoms using a feedback mechanism, which is analogous to the well known technique of stochastic cooling in the field of beam physics. Lastly, we have laid the theoretical basis for using the ponderomotive force to create optical lattices for laser cooled Rydberg atoms. Rydberg atoms are attractive because of their many extreme properties, and the ability to trap Rydberg atoms into lattice sites will increase the range of experiments and measurements that can be made with them.
Optical lattices are periodic light shift potentials that are created by the interference of several laser beams. In this dissertation I investigate the motion of atoms in such potentials. The center-of-mass wave-packet motion is initiated by an application of a sudden shift to the lattice potentials. The resulting oscillations are observed using a photon redistribution technique. We first show that by utilizing a real-time feedback loop and shifting the lattice continuously in response to the wave-packet motion, we can increase, alter or damp this motion using different gains of the feedback loop. We further show that by splitting the wave-packet between two adiabatic potentials of the lattice via quantum projection, we can construct an atom interferometer. We observe interference signal when the two components of the original wave-packet overlap. The behavior of the interference is studied as a function of lattice parameters and a consistent theoretical picture is developed. Further, we study how well-to-well tunneling of atoms and sloshing-type wave-pocket dynamics affect each other. We find that in the regions where the well-to-well tunneling is significant, the sloshing type wave-packet oscillations are suppressed. Sloshing-type motion only occurs if the tunneling is sufficiently suppressed with an applied magnetic field. Finally we describe a new type of optical lattice that is based on two-photon Raman transitions. The basic period of this lattice is reduced by a factor of two, compared with traditional lattices. We also show that Sub-Doppler cooling mechanism is present in this lattice. The dissertation is concluded with the presentation of a new experimental set-up for Bose-Einstein Condensate production, which may in the future be used for the study of BEC dynamics in optical lattices.
This dissertation reports on the experimental study of coherent wavepacket dynamics of cesium atoms in the double-well potentials of a one-dimensional, far-off-resonance optical lattice. An optical lattice is the periodic potential produced by the light shift interaction of an atom with the light field of interfering laser beams. With the proper choice of laser parameters and external magnetic fields, an array of double-well potentials is created. Using the techniques of laser cooling, atoms are trapped in the lattice and are prepared in a pure state through a combination of enhanced laser cooling in a near-resonance lattice and state selection in an accelerated far-off-resonance lattice. The atoms are prepared on one side of the double-well potential, and the atomic wavepackets will then oscillate between the left and right localized states of the double-well potential. Entanglement between the internal and external degrees of freedom makes it possible to follow the center-of-mass motion of the atoms by measuring the ground state magnetic populations via Stern-Gerlach analysis. The coherent dynamics of these wavepackets was studied under various combinations of lattice parameters such as lattice depth, applied transverse and longitudinal magnetic fields. There is excellent agreement between the experimentally measured oscillation frequencies and those predicted from a numerical analysis of the bandstructure of the lattice. For certain lattice parameters the total energy of the atom is below the potential barrier and the coherent motion corresponds to tunneling through a classically forbidden barrier. At specific times during the oscillation the atomic wavepacket corresponds to a coherent superposition of the mesoscopically distinct left and right localized states.
A complete laser cooling setup was built, with focus on threedimensional near-resonant optical lattices for cesium. These consist of regularly ordered micropotentials, created by the interference of four laser beams. One key feature of optical lattices is an inherent ”Sisyphus cooling” process. It efficiently extracts kinetic energy from the atoms, leading to equilibrium temperatures of a few µK. The corresponding kinetic energy is lower than the depth of the potential wells, so that atoms can be trapped. We performed detailed studies of the cooling processes in optical lattices by using the time-of-flight and absorption-imaging techniques. We investigated the dependence of the equilibrium temperature on the optical lattice parameters, such as detuning, optical potential and lattice geometry. The presence of neighbouring transitions in the cesium hyperfine level structure was used to break symmetries in order to identify, which role “red” and “blue” transitions play in the cooling. We also examined the limits for the cooling process in optical lattices, and the possible difference in steady-state velocity distributions for different directions. Moreover, in collaboration with ´Ecole Normale Sup´erieure in Paris, numerical simulations were performed in order to get more insight in the cooling dynamics of optical lattices. Optical lattices can keep atoms almost perfectly isolated from the environment and have therefore been suggested as a platform for a host of possible experiments aimed at coherent quantum manipulations, such as spin-squeezing and the implementation of quantum logic-gates. We developed a novel way to trap two different cesium ground states in two distinct, interpenetrating optical lattices, and to change the distance between sites of one lattice relative to sites of the other lattice. This is a first step towards the implementation of quantum simulation schemes in optical lattices.
A complete laser cooling setup was built, with focus on threedimensional near-resonant optical lattices for cesium. These consist of regularly ordered micropotentials, created by the interference of four laser beams. One key feature of optical lattices is an inherent ”Sisyphus cooling” process. It efficiently extracts kinetic energy from the atoms, leading to equilibrium temperatures of a few µK. The corresponding kinetic energy is lower than the depth of the potential wells, so that atoms can be trapped.We performed detailed studies of the cooling processes in optical lattices by using the time-of-flight and absorption-imaging techniques. We investigated the dependence of the equilibrium temperature on the optical lattice parameters, such as detuning, optical potential and lattice geometry. The presence of neighbouring transitions in the cesium hyperfine level structure was used to break symmetries in order to identify, which role “red” and “blue” transitions play in the cooling. We also examined the limits for the cooling process in optical lattices, and the possible difference in steady-state velocity distributions for different directions. Moreover, in collaboration with ´Ecole Normale Sup´erieure in Paris, numerical simulations were performed in order to get more insight in the cooling dynamics of optical lattices.Optical lattices can keep atoms almost perfectly isolated from the environment and have therefore been suggested as a platform for a host of possible experiments aimed at coherent quantum manipulations, such as spin-squeezing and the implementation of quantum logic-gates. We developed a novel way to trap two different cesium ground states in two distinct, interpenetrating optical lattices, and to change the distance between sites of one lattice relative to sites of the other lattice. This is a first step towards the implementation of quantum simulation schemes in optical lattices.
In this thesis, detailed experimental studies and numerical simulations are presented of laser cooling mechanisms in dissipative optical lattices and results of the first realized three dimensional Brownian motor in optical lattices. A dissipative optical lattice is a periodic light shift potential, created in the interference patterns of laser beams. In this, atoms can be both cooled and trapped, and the most important relaxation mechanism is generally considered to be “Sisyphus cooling”. However, careful experimental and theoretical investigations indicate the presence of other cooling processes as well. This is studied by varying different parameters such as irradiance and frequency of the lattice light. The time evolution of atoms in optical lattices show strong evidence of a bimodal velocity distribution, where a population transfer between one mode containing “hot” atoms and one mode containing “cold” atoms is evident. The normal diffusion of atoms in optical lattices is characterized by isotrop random fluctuations and exhibit the nature of Brownian motion. We have realized a technique where this motion is rectified and controlled. This is done in a three dimensional double optical lattice. This Brownian motor has control properties for both its speed and its direction in three dimensions. Our three dimensional double optical lattice is created by using laser light, exploiting two transitions, in the D2 line of cesium. Two three dimensional optical lattices are spatially overlapped; each optical lattice traps atoms in one of two hyperfine ground states. The controllability comes about by inducing phase shifts in the lattice laser beams, which displace the lattices relative to each other. This type of highly controlled Brownian motor is of fundamental interest since Brownian motion is present in almost all systems and for the role they play in protein motors and the function of living cells, and for the potential applications in nanotechnology. Brownian motors of this kind also open the way to possible studies of quantum Brownian motors and quantum resonances that are predicted for atomic ratchets. Optical lattices, and especially double optical lattices, have also been suggested as a platform for quantum state manipulations due to the good isolation from environment and ambient effects. Most of the work in this thesis is a first step towards the implementation of quantum manipulation schemes in a double optical lattice.
An optical lattice is a periodic potential for atoms, created using a standing wave pattern of light. Due to the interaction between the light and the atoms, the atoms are attracted to either the nodes or the anti-nodes of the standing wave, depending on the exact wave lenght of the light. This means that if such a lattice is loaded with a sufficiently high number of ultracold atoms, a periodic array of atoms is obtained, we an interatomic distance of a few tenths of a micrometer. In order to obtain such a high number of cold atoms, one first has to create a so-called Bose-Einstein condensate. When an optical lattice is loaded from a Bose-Einstein condensate, it is possible to create a system in which every atom is in the lowest band of the lattice and there is on average one atom in each lattice site. Because the lattice potential is created with laser light, the depth of the lattice can easily be tuned by changing the intensity of the laser. When the intensity of the laser light is low, the atoms can tunnel from one site to the next. Due to this tunneling, the gas of atoms in the lattice will remain superfluid. However, if the intensity of the laser light is increased to above a certain critical value, a quantum phase transition occurs to a so-called Mott insulator. In this state, the atoms can no longer tunnel due to the fact that the on-site interaction between atoms becomes more important then the tunneling probability. In this PhD thesis, a description is given of the experimental setup that is being constructed in our group to create these systems in our lab. Also, a theoretical description is given of these systems and several important quantities our derived, such as the gap of the Mott-insulating state. Furthermore, an experiment is proposed that can be used to accurately measure this gap.