Quantum computing is a novel paradigm for information processing that promises computational speedup for certain computational tasks while not being driven by Moore's law. Superconducting circuits based on Josephson junctions are one of the leading approaches for implementing the quantum bits, or qubits, in a quantum processor. Most superconducting qubit architectures involve circuit quantum electrodynamics, where the qubits are analogous to artificial atoms that are coupled to superconducting linear resonant cavities. This scheme allows for the readout of individual qubits, the manipulation of single-qubit states, and the generation of entanglement between qubits. The performance of current state-of-the-art systems is limited by decoherence of the qubits and associated gate errors. Nonetheless, experiments have been performed that already demonstrate a significant computational speedup compared to classical processing. Future implementations of fault-tolerant quantum computers will require the development of quantum error correction. Initial tests of elements of error correction in superconducting qubit arrays are underway.
Quantum computing holds the promise of a novel form of information processing in which data resides in quantum states. By exploiting superpositions and entanglement among these states, quantum logic operations are expected to far surpass conventional digital logic in certain classes of problems. To realize this prospect, we employ superconducting circuits at millikelvin temperatures. The nonlinearity of a Josephson tunnel junction enables a two-level quantum system, or qubit, with excitation energy in the microwave regime. Key recent advances in such devices are the demonstration of robust and simple multi-qubit gates, the integration of superconducting qubits into arrays of four or more, and gate fidelities reaching 99%. [1,2,3]
This work concerns the study of Josephson junction circuits in the context of their usability for quantum computing. The zero-voltage state of a current-biased Josephson junction has a set of metastable quantum energy levels. If a junction is well isolated from its environment, it will be possible to use the two lowest states as a qubit in a quantum computer. I first examine the meaning of isolation theoretically. Using a master equation, I analyzed the effect of dissipation on escape rates and suggested a simple method, population depletion technique, to measure the relaxation time. Using a stochastic Bloch equation to analyze microwave resonance shapes, I found a relation between current noise induced decoherence and the noise spectrum. I then analyze and test a few qubit isolation schemes, including resistive isolation, inductor-capacitor (LC) isolation, and inductor-junction (LJ) isolation. I found the resistive isolation scheme has a severe heating problem. Macroscopic quantum tunneling and energy level quantization were observed in the LC isolated junction qubits at 25 mK. Relaxation times of 4-12 ns and spectroscopic coherence times of 1-3 ns were obtained for these LC isolated qubits. I measured a relaxation time of 50 ns and a spectroscopic coherence time of 5-8 ns for the LJ isolated junction qubit. Both times are much longer than those of the LC isolated qubits. Rabi oscillations were also observed on this sample with a decay time of around 10 ns. Using microwave spectroscopy techniques, I probed quantum phenomena in a coupled macroscopic three-qubit system that is comprised of two Nb/AlOx/Nb Josephson junctions and an LC resonator. The measured spectrum at 25 mK in the frequency range 4-15 GHz agrees well with quantum mechanical calculations, consistent with the existence of entangled states between the three degrees of freedom. These entangled states and a first-order strong coupling between two junction qubits open the possibility of using a resonator as a data bus for information storage and manipulation in a multi-qubit system. The measurements also demonstrate spectroscopy is a powerful tool and can be used to study a composite system with many qubits.
The power of quantum computation derives from algorithmic methods that exploit the availability of quantum superposition and entanglement to perform computations that are intractable with classical devices. The race is on to develop hardware that will unleash the promise of quantum algorithms. A handful of different types of hardware are currently being developed with the greatest efforts directed at superconducting, quantum-dot, trapped-ion, photonic, and neutral-atom approaches [1]. While all approaches have strengths and weaknesses, and are at different stages of development, the challenge of creating a practical design that can be scaled to a million or more qubits has not yet been met with any of the existing platforms. One may wonder if we really need a million qubits for a useful quantum computer. The answer depends on our ambition level. On the one hand it is widely believed that a quantum computer with less than 100 reliable qubits will be able to demonstrate a quantum advantage for a well defined computational problem [2]. Demonstration of a quantum computational advantage will generate great excitement in the halls of academia, but will have little broader import. A problem of great practical interest such as ab initio design of chemicals for increasing the yield of fertilizers for crop production, to name but one example, may also require just a few hundred qubits, provided computational sequences with circuit depth of 1010 or more operations can be reliably performed [3]. However, given the current performance of qubit hardware, which has demonstrated error rates not less than ∼10−3, computations with depth 1010 will only produce random outcomes of negligible value. The solution lies in the construction of error-correction circuitry operating on logical qubits, each composed of many physical qubits, which will enable logical error rates many orders of magnitude smaller than physical error rates. Although error correction is remarkably efficient for classical computing devices—Hamming codes detect and correct errors while only requiring roughly 10% overhead in the number of physical bits—quantum error correction is notoriously expensive. New approaches to error correction are the subject of intensive research with one promising direction being the development of codes that are optimized to suppress the dominant error mechanism in a particular physical platform [4,5]. Nevertheless, with physical error rates of 10−4, a plausible target for current qubit systems, the overhead required to reach logical error rates of 10−10 may be measured in thousands of physical qubits for each logical qubit. Thus a quantum computer able to perform deep calculations on a few hundred logical qubits could require a million physical qubits. A consequence of the cost of quantum error correction is that any viable approach to large-scale quantum computing needs to combine high-fidelity quantum logic operations with a capability for integrating large numbers of physical qubits. From this perspective neutral-atom qubits appear particularly promising [6] as they have already demonstrated control of more qubits than any other platform with recent experiments in 1D [7], 2D [8,9], and 3D [10] geometries showing control of up to 50 atomic qubits. Large qubit arrays can potentially be prepared in 1D, 2D, or 3D geometries. The number of proximal qubits increases with the dimensionality, which is advantageous for implementation of error correction code words, and points towards a preference for 2D or 3D arrays. On the other hand, the added overhead of compensating crosstalk incurred when targeting atoms inside a 3D volume makes parallel operations on multiple qubits challenging. A 2D geometry, as shown schematically in Fig. 1, may be an optimal choice since qubit control and measurement can be performed with lasers propagating normal to the plane of the array so that individual qubit sites can be addressed independently. With demonstrated array periods of a few micrometers we require a footprint of less than 1 mm2 for 104 qubits. Conceptual picture of a 2D neutral-atom qubit array. a) High-numerical-aperture lenses project several different wavelengths of light for control and measurement of the qubits. Specific choices of optical wavelengths depend on the atomic species. Not shown are optics for initial laser cooling, transport to the array, beam scanning, and imaging for qubit measurement. b) Averaged fluorescence image of 49 atomic qubits on a 2D grid with |
3.8μm| spacing [8]. From a fundamental perspective the prospects for scaling neutral-atom systems are particularly promising due to the exceptionally large ratio between coherent and incoherent coupling rates. Neutral-atom qubits are encoded in hyperfine ground states for which coherence times of the order of 10 s have been demonstrated [10]. This implies a dephasing rate |
γ∼0.1s−1|. The coherent coupling that enables quantum logic operations is switched on by exciting atoms to high-lying Rydberg states with principal quantum number close to 100 [11,12]. Rydberg excited atoms at spacings of a few micrometers in an optical lattice interact coherently with rates |
g>109s−1|. The ratio between desired coherent coupling and residual incoherent dephasing of g/γ ∼ 1010 establishes a figure of merit that is enabling for scalability. To our knowledge only trapped ions can claim a similar g/γ ratio [13], but without a correspondingly direct path towards controlling thousands of qubits in a single processing unit. Although the g/γ ratio is exceptionally favorable for neutral-atom qubits a complete set of universal gate operations has not yet been demonstrated with high fidelity. Single-qubit gates in large 2D and 3D arrays have reached fidelity |
F∼0.999| [8,10]. However, the highest demonstrated fidelity for two-qubit entanglement mediated by Rydberg-state interactions is |
F<0.8| [6,14,15], a value that is well short of the theoretical limit of |
F>0.9999| [16,17]. There is healthy optimism within the research community working with neutral-atom qubits that combining improved laser sources with reduced noise, better cooling to reduce motional dephasing, and control of stray electric fields that perturb Rydberg atoms will lead to substantially improved gate fidelity in the near future. Recent results with better filtering of laser phase noise have already demonstrated remarkable improvement in ground–Rydberg entanglement [18]. The outlook for the next few years appears very promising. We anticipate that with advances in lasers, optical lattices for atom trapping, deterministic rearrangement and loading of atoms in multi-dimensional arrays [19,20], and optics for fast beam scanning it will be possible to increase the number of physical qubits in a single neutral-atom module to at least 104. A challenging yet plausible path to a million-qubit processor can then be contemplated by connecting 100 such modules with atom–photon entanglement channels [21]. Beyond the potential for advancing the state of the art in computation, development of techniques for single-atom control inside large multi-atom arrays will enable other applications of quantum science including metrology and time-keeping. Rydberg interactions that are at the heart of a neutral-atom quantum computer may lead to multi-atom entanglement and Heisenberg scaling of atomic-clock precision [22]. This work was supported by the NSF and ARL CDQI.
Josephson junctions have been shown to be a promising solid-state system for implementation of quantum computation. The two-qubit gates are generally realized by the capacitive coupling between the nearest-neighbor qubits. We propose an effective Hamiltonian to describe charge qubits coupled through the microwave cavity. We find that nontrivial two-qubit gates may be achieved by this coupling. The ability to interconvert localized charge qubits and flying qubits in the proposed scheme implies that quantum network can be constructed using this large scalable solid-state system.