Superconducting quantum circuits rely on compact, low-loss inductive elements, strong anharmonicity, and robust flux biasing to realize coherent and controllable quantum bits. This thesis investigates how vertically stacked Josephson junction arrays can be employed to meet these requirements and enable compact flux qubits operated in the quarton regime. In the first part, stacked Al/AlOx/Al Josephson junctions are established as compact linear inductors. Their three-dimensional geometry reduces parasitic capacitance to ground while allowing multiple junctions to be integrated within a small footprint. A numerical modeling approach is used to quantify stray capacitances, Coulomb screening, and collective modes of extended stacked junction arrays. Cryogenic transport measurements confirm strongly underdamped junction dynamics with uniform junction characteristics, demonstrating their suitability as low-loss inductive elements in superconducting circuits. In the second part, these inductors are integrated into flux qubits operated in the quarton regime. In this regime, the qubit potential becomes nearly quartic around half-flux bias, resulting in positive anharmonicity and first-order insensitivity to flux noise at the operating point. Spectroscopy reveals qubit transition frequencies in the 3–5 GHz range and anharmonicities of 0.5–1.5 GHz, consistent with the expected quartic potential landscape. To distinguish intrinsic from externally induced decoherence, a persistent-current bias scheme is implemented, enabling stable and low-noise flux biasing over time scales of up to one week. A direct comparison between conventionally biased and persistently biased devices rules out external flux noise as the dominant coherence-limiting mechanism. High-resolution spectroscopy identifies avoided level crossings caused by microscopic two-level systems (TLS) in the amorphous tunnel barriers of the stacked junctions. A systematic cumulative analysis of splitting statistics across multiple devices shows that the spectral TLS density scales with the total tunnel-barrier area, while the array length determines the effective qubit–TLS coupling strength. The measured relaxation times follow scaling relations consistent with Fermi’s golden rule for a bath of weakly coupled TLS, demonstrating that TLS in the stacked junction arrays constitute the dominant intrinsic decoherence channel in quarton qubits. These results establish stacked Josephson junction arrays as compact superinductive elements and provide an understanding of coherence limitations in superconducting quantum circuits based on Josephson junction arrays, offering guidance for future device optimization.
Superconducting quantum circuits rely on compact, low-loss inductive elements, strong anharmonicity, and robust flux biasing to realize coherent and controllable quantum bits. This thesis investigates how vertically stacked Josephson junction arrays can be employed to meet these requirements and enable compact flux qubits operated in the quarton regime. In the first part, stacked Al/AlOx/Al Josephson junctions are established as compact linear inductors. Their three-dimensional geometry reduces parasitic capacitance to ground while allowing multiple junctions to be integrated within a small footprint. A numerical modeling approach is used to quantify stray capacitances, Coulomb screening, and collective modes of extended stacked junction arrays. Cryogenic transport measurements confirm strongly underdamped junction dynamics with uniform junction characteristics, demonstrating their suitability as low-loss inductive elements in superconducting circuits. In the second part, these inductors are integrated into flux qubits operated in the quarton regime. In this regime, the qubit potential becomes nearly quartic around half-flux bias, resulting in positive anharmonicity and first-order insensitivity to flux noise at the operating point. Spectroscopy reveals qubit transition frequencies in the 3–5 GHz range and anharmonicities of 0.5–1.5 GHz, consistent with the expected quartic potential landscape. To distinguish intrinsic from externally induced decoherence, a persistent-current bias scheme is implemented, enabling stable and low-noise flux biasing over time scales of up to one week. A direct comparison between conventionally biased and persistently biased devices rules out external flux noise as the dominant coherence-limiting mechanism. High-resolution spectroscopy identifies avoided level crossings caused by microscopic two-level systems (TLS) in the amorphous tunnel barriers of the stacked junctions. A systematic cumulative analysis of splitting statistics across multiple devices shows that the spectral TLS density scales with the total tunnel-barrier area, while the array length determines the effective qubit–TLS coupling strength. The measured relaxation times follow scaling relations consistent with Fermi’s golden rule for a bath of weakly coupled TLS, demonstrating that TLS in the stacked junction arrays constitute the dominant intrinsic decoherence channel in quarton qubits. These results establish stacked Josephson junction arrays as compact superinductive elements and provide an understanding of coherence limitations in superconducting quantum circuits based on Josephson junction arrays, offering guidance for future device optimization.
Quantum computers utilize qubits to store and process quantum information. In superconducting quantum computers, qubits are implemented as quantum superconducting resonant circuits. The circuits are operated only at the two energy states, which form the computational basis for the qubit. To suppress leakage to uncomputational states, superconducting qubits are designed to be anharmonic oscillators, which is achieved using one or more Josephson junctions, a nonlinear superconducting element. One of the main challenges in developing quantum computers is minimizing the decoherence caused by environmental noise. Decoherence is characterized by two coherence times, T1 for depolarization processes and T2 for dephasing. This thesis reviews and investigates the decoherence properties of superconducting qubits. The main goal of the thesis is to analyze the tradeoff between anharmonicity and dephasing in a qubit unimon. Recently developed unimon incorporates a single Josephson junction shunted by a linear inductor and a capacitor. Unimon is tunable by external magnetic flux, and at the half flux quantum bias, the Josephson energy is partially canceled by the inductive energy, allowing unimon to have relatively high anharmonicity while remaining fully protected against low-frequency charge noise. In addition, at the sweet spot with respect to the magnetic flux, unimon becomes immune to first-order perturbations in the flux. The sweet spot, however, is relatively narrow, making unimon susceptible to dephasing through the quadratic coupling to the flux noise. In the first chapter of this thesis, we present a comprehensive look into the basic theory of superconducting qubits, starting with two-state quantum systems, followed by superconductivity and superconducting circuit elements, and finally combining these two by introducing circuit quantum electrodynamics (cQED), a framework for building superconducting qubits. We follow with a theoretical discussion of decoherence in two-state quantum systems, described by the Bloch-Redfield formalism. We continue the discussion by estimating decoherence using perturbation theory, with special care put into the dephasing due to the low-frequency 1/f noise. Finally, we review the theoretical model of unimon, which is used in the numerical analysis. As a main result of this thesis, we suggest a design parameter regime for unimon, which gives the best ratio between anharmonicity and T2.
Low-loss inductors are essential components in various superconducting circuits, such as qubits or digital electronics. In this study, we investigate highly compact inductors formed by vertically stacking Josephson junctions. Our implementation employs several layers of aluminum separated by tunnel barriers. Individual stacks are connected by suspended superconducting bridges, which are free of additional dielectric materials and, therefore, should not contribute significantly to losses. We present implementation details, fabrication results, and device characterization measurements.
Superconducting quantum computing is a solid state quantum computing technology based on Josephson junction circuits. It becomes one of the most promising candidates for realizing practical quantum computer/simulator, because of its scalability, easy to coupling and control, compatibility to semiconductor technologies, etc. As the complicated electromagnetic environment in solid state metal and insulator, superconducting quantum bits (qubits) suffered from shot coherence time since its early development. In this review, we described some recently developed superconducting qubit structures, including Transmon/Xmon, Fluxonium and C-shunt flux qubit. Although these new qubit structures have very different circuit parameters and energy scales, they all find their way to effectively suppress environmental noises. As a result, their coherence time were improved significantly. Transmon, a transmission-line shunted plasma oscillation qubit, was now among the most popular structures for building a multi-qubit superconducting quantum circuit. It introduced a relatively large shunt capacitor to remarkably reduce the charge dispersion. Although the non-linearity is also decreased, by operating in a properly chosen EJ/Ec, transmon can greatly reduce the charge noise while only sacrificing a small amount of non-linearity. Xmon can be considered as a modified version of transmon. It is designed and optimized for multi-qubit operation and measurement with separate X/Y and Z control lines for each qubit, and a readout bus (a transmission line or a low-Q bandpass filter) for simultaneous readout of all the qubits. Fluxonium provide another solution for suppressing the charge noise in Cooper-pair box (CPB). It introduces a large shunt inductance to filter low-frequency offset charge in the small capacitor of the phase-slip junction (the small junction). To keep the qubit operating in the charge region, the shunt inductor should be large enough to keep the impedance larger than the superconducting impedance quantum RQ~1 kΩ. As a result, the inductance can only be provided by a large series of Josephson junctions. Fluxonium keeps the advantage of high anharmonicity of CPB. In addition, it introduces another degree of freedom: external flux Φext. Quasiparticles (electrons or holes) tunneling at the small junction add coherently to produce a ″1+cosφ″ term. As a result, when Φext= Φ0/2, dissipation caused by quasiparticle tunneling is suppressed and the energy relaxation time (T1) increases drastically. C-shunt flux qubit (CSFQ) decreases α and EJ to suppress flux noise in the qubit. While the charge noise becomes the dominant noise source, a large shunt capacitor is added to suppress the charge noise, similar to that in a transmon qubit. It is worth to notice that in CSFQ, the α decreases to below but near 1/2. As a result, the double-well potential no longer exists. The energy structure become similar to transmon, with the anharmonicity be opposite. CSFQ can get a much improved coherence time, while its anharmonicity can be larger than that of transmon. Those new superconducting qubit structures provide different solutions to improve the coherence time. Although it looks much different in circuit models and parameters, they have ideas in common, and may act as guides to other novel designs with longer coherence time. We can summarize as below. (1) The qubit circuit should be free of small superconducting islands. Charge fluctuation in small islands is a major source of decoherence. As a result, increase the area of the islands, that is, increase the capacitance becomes a straight forward way to suppress the charge noise. In Fluxonium, the small junction is connected with a large series of large junctions that there is also no small islands in the whole loop. (2) Remove superconducting loops in the qubit circuit, or minimize the loop size and loop current to suppress flux noise. (3) Bias the phase difference of the small junction to π, where dissipation caused by quasiparticle tunneling can be suppressed coherently. (4) Decrease the coupling bandwidth of qubit to the environment. In a circuit-QED readout scheme, a high-Q readout resonator that dispersively coupled to the qubit protects the qubit from exposed to the electromagnetic environment of the readout circuit. A ″Purcell filter″ can also be added to suppress such decoherence further. In conclusion, we overviewed some qubit engineering techniques or ideas to improve the coherence time, which is a very important figure for building practical quantum computer/simulator. We hope that someone can combine and optimize these ideas, while interact with developments in materials and micro-fabrication technologies, to develop novel new generation superconducting qubit structures in the near future.
Over the past two decades the performance of superconducting quantum bits (qubits) has been improved tremendously: the coherence time of individual qubits has been increased by five orders of magnitude, from a few nanoseconds to >100 μs. The much-improved coherence, lithographic scalability, and compatibility with microwave control place superconducting qubits in the leading position in the race amongst several quantum systems being considered for quantum information processing. Despite this very impressive progress, experimental realization of quantum error corrections and demonstration of logical qubits remains a considerable challenge.One of possible solutions to this problem is the development of so-called protected qubits whose errors would be suppressed by special symmetries of the underlying Hamiltonian. The realization of such qubits requires elements not found in the conventional superconducting circuit toolbox, such as Josephson elements with cos(ϕ/2) and cos(2ϕ) dependences of the Josephson energy E_J on the phase difference ϕ, circuits with a very large kinetic inductance, and junctions with unusually low E_J.This thesis focuses on design, fabrication and characterization of circuits based on low-E_J Josephson junctions (JJs) and superinductors (SIs). By analyzing limitations on the junction performance imposed by the thermally activated phase slips, we observed a dramatic reduction of the critical currents in the regime E_J≤T which was accompanied by an increase of the zero-bias resistance R_0. The first part of this work provides practical considerations for the use of such junctions in quantum circuits. With the aim of improving elements with a very high kinetic inductance, in the second part we developed superinductors based on the granular Aluminum (grAl) films, in which Josephson junctions are realized between nanoscale grains. The circuits based on such SIs demonstrate low microwave losses at ultra-low temperatures. Superinductors are an essential element of a novel qubit that we have developed – the so-called bifluxon. The qubit consists of a Cooper-pair box (CPB) with low-E_J Josephson junctions shunted by a superinductor, thus forming a superconducting loop. When the loop is threaded by the magnetic flux Φ=Φ_0⁄2 where Φ_0 is the flux quantum, the qubit offers exponential suppression of energy decay from charge and flux noises, and dephasing from flux noise. In the last part of this work, we observed an increase of the energy relaxation time by two orders of magnitude, up to 100μs, by turning on protection in the bifluxon qubit.
Superconducting circuits provide a promising approach for constructing a large-scale quantum computer in the future. In theory, a fault-tolerant quantum computer is suitable for efficiently simulating quantum-mechanical systems, such as molecules, or factorizing large integers - to name a few examples. However, reaching a practical quantum advantage will probably require scaling up the number of qubits in current quantum-processing units by several orders of magnitude while retaining high controllability and high coherence of individual qubits. In this thesis, we first provide a review of the most common superconducting qubit types in order to shed light on the factors that affect the coherence, anharmonicity, and operation of single qubits. Using the insight gained from the review, we theoretically study a novel superconducting qubit circuit that consists of a grounded coplanar waveguide resonator incorporating an embedded Josephson junction in the center conductor of the resonator. The non-linear Josephson junction renders the normal modes of the resonator anharmonic, as a result of which one of the normal modes can be utilized to implement a qubit. The studied circuit, nicknamed as the coplanarium, may provide a high-coherence superconducting qubit since it contains no isolated superconducting islands rendering the qubit immune to dephasing arising from low-frequency charge noise. We derive the quantum Hamiltonian of the distributed circuit from first principles both with and without an external magnetic flux. Using numerical calculations based on our theoretical results, we show that the anharmonicity of the coplanarium qubit can exceed 500 MHz for a qubit frequency of 5 GHz at a flux-insensitive sweet spot if an appropriate external magnetic flux is applied. Importantly, the parameter values used in the numerical simulations are experimentally feasible, and the characteristic impedance of the resonator needs to be no greater than Z0 = 100 Omega. The relatively high anharmonicity can be attributed to a partial cancellation of the quadratic potential-energy terms associated with the Josephson junction and the linear inductance of the resonator. In conclusion, the promising coherence and anharmonicity properties may render the coplanarium qubit an interesting alternative for reducing leakage errors, and the ratio between coherence times and the duration of quantum logic gates in superconducting quantum processors.
This thesis examines the behavior of dc SQUID phase qubits in terms of their proposed use in a quantum computer. In a phase qubit, the two lowest energy states (n=0 and n=1) of a current-biased Josephson junction form the qubit states, with the gauge invariant phase difference across the junction being relatively well defined. In a dc SQUID phase qubit, the Josephson junction is isolated from the environment using an inductive isolation network and Josephson junction, which are connected across the phase qubit junction to form a dc SQUID. Five dc SQUID phase qubits were examined at temperatures down to 25 mK. Three of the devices had qubit junctions that were Nb/AlOx/Nb junctions with critical currents of roughly 30 microamps. The other two had Al/AlOx/Al junctions with critical currents of roughly 1.3 microamps. The device that had the best performance was an Al/AlOx/Al device with a relaxation time of 30 ns and a coherence time of 24 ns. The devices were characterized using microwave spectroscopy, Rabi oscillations, relaxation and Ramsey fringe measurements. I was also able to see coupling between two Nb/AlOx/Nb dc SQUID phase qubits and perform Rabi oscillations with them. The Nb/AlOx/Nb devices had a relaxation time and coherence time that were half that of the Al/AlOx/Al device. One of the goals of this work was to understand the nature of parasitic quantum systems (TLSs) that interact with the qubit. Coupling between a TLS and a qubit causes an avoided level crossing in the transition spectrum of the qubit. In the Al/AlOx/Al devices unintentional avoided level crossings were visible with sizes up to 240 MHz, although most visible splittings were of order ~20 MHz. The measured spectra were compared to a model of the avoided level crossing based on the TLSs coupling to the junction, through either the critical current or the voltage across the junction.