Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:physics/9908029 · Physical Review Letters

Guiding Neutral Atoms on a Chip

Nynke H. Dekker, C. S. Lee, V. Lorent, Joseph H. Thywissen, Steven P. Smith, Marija Drndić, Robert M. Westervelt, Mara Goff Prentiss

Published Feb 7, 2000• 270 citations
arXivHTMLPDF

Abstract

We demonstrate the guiding of neutral atoms by the magnetic fields due to microfabricated current-carrying wires on a chip. Atoms are guided along a magnetic field minimum parallel to and above the current-carrying wires. Two guide configurations are demonstrated: one using two wires with an external magnetic field, and a second using four wires without an external field. These guide geometries can be extended to integrated atom optics circuits, including beam splitters.

DOI
10.1103/physrevlett.84.1124

Related papers

Guiding Neutral Atoms with Two Current-Carrying Wires and a Vertical Bias Field on the Atom Chip

Ke Min, Xiaolin Li, Yuzhu Wang

We demonstrate the guiding of neutral atoms with two parallel microfabricated current-carrying wires on the atom chip and a vertical magnetic bias field. The atoms are guided along a magnetic field minimum parallel to the current-carrying wires and confined in the other two directions. We describe in detail how the precooled atoms are efficiently loaded into the two-wire guide. We present a detailed experimental study of the motional properties of the atoms in the guide and the relationship between the location of the guide and the vertical bias field. This two-wire guide with vertical bias field can be used to realize large area atom interferometer.

Chinese Physics Letters•Mar 1, 2008•5 citations

Atom chips

R. Folman, P. Krüger, Donatella Cassettari +3 more

We report on the experimental realisation of traps and guides for neutral atoms on a nanofabricated chip. Our main results are: (a) Trap parameters with a transverse ground state size below 100 nm and frequencies of above 100 kHz (as required by QIP proposals) have been achieved. (b) We could trap and guide atoms exclusively with the fields created on the chip. (c) We have shown that a wide variety of magnetic potentials may be realised, such as quadrupole fields for a MOT, 3D minima for trapping, 2D minima for guiding, and beam splitters. (d) It has been shown that standard nanofabrication techniques and materials may he utilised to build these atom chips. The wires on the surface can stand sufficiently high current densities in vacuum and at room temperature.

•Jan 1, 2000•1 citation

Atom optics with laser-cooled atoms guided by magnetic fields from current-carrying wires

Dana Z. Anderson, Dirk Müller, M. Prevedelli +2 more

Summary form only given. Just as optical waveguides play a central role in many aspects of modern optics, from communications to integrated optics, atom waveguides are likely to be an enabling technology for future atom-optics-based science. In particular, well-characterized atom waveguides may make possible inertial and rotation measurements of exquisite sensitivity via large-enclosed-area atom interferometers. The first guides for atoms were based on optical forces, where hollow glass fibers guide light, and the light in turn guides atoms. In this paper we have guided neutral atoms using photolithographically patterned current-carrying wires in two different configurations.

Quantum Electronics and Laser Science Conference•May 12, 2000•0 citations

Three magnetic devices for atom optics

Philip F. Schewe

Have been demonstrated: a beam splitter, a conveyor belt, and a switch. Just as electrons drive electronics and photons drive photonics, many researchers hope that cold, neutral atoms will drive a future “atomtronics.” To process information, atoms will need to be manipulated on or near an “atom chip” using atom-based analogs of mirrors, lenses, waveguides, gratings, and other devices. The new devices reported here all exploit the interaction between a neutral atom’s magnetic moment and an external magnetic field with a gradient strong enough to create microscopic potentials. Jörg Schmiedmayer of the University of Heidelberg and his colleagues have designed a beam splitter for guided atoms, using a Y-shaped current-carrying wire nanofabricated on a surface. Depending on how current is sent through the Y, atoms can be directed to the output arms with any desired ratio. A group at the Max Planck Institute for Quantum Optics in Munich has been able to confine atom clouds in separate potential wells and transport them with 800-nm precision near a surface having time-dependent currents in a lithographically patterned conductor. The researchers have used their “magnetic conveyor belt” to merge separate clouds; their evidence shows that the process is adiabatic and can be reversed to coherently split wavepackets. Also using lithography, and following their own beam splitter, a group at the University of Colorado and NIST in Boulder has devised a switch that can direct a guided beam of neutral atoms to either of two output ports separated by 8 mm. Both the incoming and outgoing atoms are guided between two parallel wires having current flowing in the same direction. In the switch region, the atoms are guided alongside two wires with oppositely flowing current. (D. Cassettari et al., Phys. Rev. Lett. 85, 5483, 2000 http://dx.doi.org/10.1103/PhysRevLett.85.5483 . W. Hänsel et al., Phys. Rev. Lett. 86, 608, 2001 http://dx.doi.org/10.1103/PhysRevLett.86.608 . D. Müller et al., Opt. Lett. 25, 1382, 2000 http://dx.doi.org/10.1364/OL.25.001382 ; D. Müller et al., Phys. Rev. A , in press.)© 2001 American Institute of Physics.

Physics Today•Feb 1, 2001•0 citations

Guiding Neutral Atoms Around Curves with Lithographically Patterned Current-Carrying Wires

Dirk Müller, Dana Z. Anderson, Randal J. Grow +2 more

Laser-cooled neutral atoms from a low-velocity atomic source are guided via a magnetic field generated between two parallel wires on a glass substrate. The atoms bend around three curves, each with a 15-cm radius of curvature, while traveling along a 10-cm-long track. A maximum flux of $2\ifmmode\times\else\texttimes\fi{}{10}^{6}\phantom{\rule{0ex}{0ex}}\mathrm{atoms}/\mathrm{sec}$ is achieved with a current density of $3\ifmmode\times\else\texttimes\fi{}{10}^{4}\phantom{\rule{0ex}{0ex}}\mathrm{A}/{\mathrm{cm}}^{2}$ in the $100\ifmmode\times\else\texttimes\fi{}100$- $\ensuremath{\mu}\mathrm{m}$-cross-section wires. The kinetic energy of the guided atoms in one transverse dimension is measured to be $42\ensuremath{\mu}\mathrm{K}$.

arXiv:physics/9908031•Physical Review Letters•Dec 20, 1999•210 citations

Magnetic switch for integrated atom optics

Dirk Müller, Eric Cornell, M. Prevedelli +3 more

A magnetic waveguide structure allows switching of neutral atoms between two guides. The switch consists of lithographically patterned current-carrying wires on a sapphire substrate. By selectively sending current through a particular set of wires, we select the desired output port of an incoming beam. We utilize two different magnetic-guiding schemes to adiabatically manipulate the atom trajectory.

Physical Review A•Mar 15, 2001•43 citations
We demonstrate the guiding of neutral atoms by the magnetic fields due to microfabricated current-carrying wires on a chip. Atoms are guided along a magnetic field minimum parallel to and above the current-carrying wires. Two guide configurations are demonstrated: one using two wires with an external magnetic field, and a second using four wires without an external field. These guide geometries can be extended to integrated atom optics circuits, including beam splitters.
We demonstrate the guiding of neutral atoms with two parallel microfabricated current-carrying wires on the atom chip and a vertical magnetic bias field. The atoms are guided along a magnetic field minimum parallel to the current-carrying wires and confined in the other two directions. We describe in detail how the precooled atoms are efficiently loaded into the two-wire guide. We present a detailed experimental study of the motional properties of the atoms in the guide and the relationship between the location of the guide and the vertical bias field. This two-wire guide with vertical bias field can be used to realize large area atom interferometer.
We report on the experimental realisation of traps and guides for neutral atoms on a nanofabricated chip. Our main results are: (a) Trap parameters with a transverse ground state size below 100 nm and frequencies of above 100 kHz (as required by QIP proposals) have been achieved. (b) We could trap and guide atoms exclusively with the fields created on the chip. (c) We have shown that a wide variety of magnetic potentials may be realised, such as quadrupole fields for a MOT, 3D minima for trapping, 2D minima for guiding, and beam splitters. (d) It has been shown that standard nanofabrication techniques and materials may he utilised to build these atom chips. The wires on the surface can stand sufficiently high current densities in vacuum and at room temperature.
Summary form only given. Just as optical waveguides play a central role in many aspects of modern optics, from communications to integrated optics, atom waveguides are likely to be an enabling technology for future atom-optics-based science. In particular, well-characterized atom waveguides may make possible inertial and rotation measurements of exquisite sensitivity via large-enclosed-area atom interferometers. The first guides for atoms were based on optical forces, where hollow glass fibers guide light, and the light in turn guides atoms. In this paper we have guided neutral atoms using photolithographically patterned current-carrying wires in two different configurations.
Have been demonstrated: a beam splitter, a conveyor belt, and a switch. Just as electrons drive electronics and photons drive photonics, many researchers hope that cold, neutral atoms will drive a future “atomtronics.” To process information, atoms will need to be manipulated on or near an “atom chip” using atom-based analogs of mirrors, lenses, waveguides, gratings, and other devices. The new devices reported here all exploit the interaction between a neutral atom’s magnetic moment and an external magnetic field with a gradient strong enough to create microscopic potentials. Jörg Schmiedmayer of the University of Heidelberg and his colleagues have designed a beam splitter for guided atoms, using a Y-shaped current-carrying wire nanofabricated on a surface. Depending on how current is sent through the Y, atoms can be directed to the output arms with any desired ratio. A group at the Max Planck Institute for Quantum Optics in Munich has been able to confine atom clouds in separate potential wells and transport them with 800-nm precision near a surface having time-dependent currents in a lithographically patterned conductor. The researchers have used their “magnetic conveyor belt” to merge separate clouds; their evidence shows that the process is adiabatic and can be reversed to coherently split wavepackets. Also using lithography, and following their own beam splitter, a group at the University of Colorado and NIST in Boulder has devised a switch that can direct a guided beam of neutral atoms to either of two output ports separated by 8 mm. Both the incoming and outgoing atoms are guided between two parallel wires having current flowing in the same direction. In the switch region, the atoms are guided alongside two wires with oppositely flowing current. (D. Cassettari et al., Phys. Rev. Lett. 85, 5483, 2000 http://dx.doi.org/10.1103/PhysRevLett.85.5483 . W. Hänsel et al., Phys. Rev. Lett. 86, 608, 2001 http://dx.doi.org/10.1103/PhysRevLett.86.608 . D. Müller et al., Opt. Lett. 25, 1382, 2000 http://dx.doi.org/10.1364/OL.25.001382 ; D. Müller et al., Phys. Rev. A , in press.)© 2001 American Institute of Physics.
Laser-cooled neutral atoms from a low-velocity atomic source are guided via a magnetic field generated between two parallel wires on a glass substrate. The atoms bend around three curves, each with a 15-cm radius of curvature, while traveling along a 10-cm-long track. A maximum flux of $2\ifmmode\times\else\texttimes\fi{}{10}^{6}\phantom{\rule{0ex}{0ex}}\mathrm{atoms}/\mathrm{sec}$ is achieved with a current density of $3\ifmmode\times\else\texttimes\fi{}{10}^{4}\phantom{\rule{0ex}{0ex}}\mathrm{A}/{\mathrm{cm}}^{2}$ in the $100\ifmmode\times\else\texttimes\fi{}100$- $\ensuremath{\mu}\mathrm{m}$-cross-section wires. The kinetic energy of the guided atoms in one transverse dimension is measured to be $42\ensuremath{\mu}\mathrm{K}$.