The superconducting phase qubit combines Josephson junctions into superconducting loops and defines one of the promising solid state device implementations for quantum computing. While conventional designs are based on magnetically frustrated superconducting loops, here we discuss the advantages offered by $π$-junctions in obtaining naturally degenerate two-level systems. Starting from a basic five-junction loop, we show how to construct degenerate two-level junctions and superconducting phase switches. These elements are then effectively engineered into a superconducting phase qubit which operates exclusively with switches, thus avoiding permanent contact with the environment through external biasing. The resulting superconducting phase qubits can be understood as the macroscopic analogue of the `quiet' s-wave-d-wave-s-wave Josephson junction qubits introduced by Ioffe {\it et al.} [Nature {\bf 398}, 679 (1999)].
The superconducting phase qubit combines Josephson junctions into superconducting loops and defines one of the promising solid state device implementations for quantum computing. While conventional designs are based on magnetically frustrated superconducting loops, here we discuss the advantages offered by π-junctions in obtaining naturally degenerate two-level systems. Starting from a basic five-junction loop, we show how to construct degenerate two-level junctions and superconducting phase switches. These elements are then effectively engineered into a superconducting phase qubit which operates exclusively with switches, thus avoiding permanent contact with the environment through external biasing. The resulting superconducting phase qubits can be understood as the macroscopic analogue of the `quiet' s-wave-d-wave-s-wave Josephson junction qubits introduced by Ioffe {\it et al.} [Nature {\bf 398}, 679 (1999)].
A superconducting-phase quantum bit (qubit) involves three or more Josephson junctions combined into a superconducting loop and defines one of the promising solid-state device implementations for quantum computing. Recently, so called $\ensuremath{\pi}$ junctions, Josephson junctions with a ground state characterized by a \ensuremath{\pi}-phase shift across, have attracted much attention. We show how to make use of such $\ensuremath{\pi}$ junctions in the construction of superconducting phase qubits and discuss the advantage over conventional designs based on magnetically frustrated loops. Starting from a basic five-junction loop with one $\ensuremath{\pi}$ junction, we show how to construct effective junctions with degenerate minima characterized by phase shifts 0 and $\ensuremath{\pi}$ and superconducting-phase switches. These elements are then combined into a superconducting-phase qubit which operates exclusively with switches, thus avoiding permanent contact with the environment through external biasing. The resulting superconducting-phase qubits can be understood as the macroscopic analog of the ``quiet'' s-wave--d-wave--s-wave Josephson-junction qubits introduced by Ioffe et al. [Nature (London) 398, 679 (1999)].
Superconducting flux qubits are a promising candidate for solid-state quantum computation. One of the reasons is that implementing a controlled coupling between the qubits appears to be relatively easy, if one uses tunable Josephson junctions. We evaluate possible coupling strengths and show how much extra decoherence is induced by the subgap conductance of a tunable junction. In light of these results, we evaluate several options of using intrinsically shunted junctions and show that based on available technology, Josephson field effect transistors and high-Tc junctions used as π shifters would be a good option, whereas the use of magnetic junctions as π shifters severely limits quantum coherence.
The presence of spontaneous currents in unconventional Josephson junctions gives rise to the possibility of using zero magnetic field magnetization states in an unconventional loop as qubit states in a Josephson quantum computing device. However, the advantage of zero field may be insufficient to overcome the problems arising in the design and fabrication of low-noise, low-dissipation, reproducible devices. On the other hand, low-T/sub c/ "flux" devices suffer the same problems though their perspectives are more promising. The solution could be an increase in the device complexity, but with the gain of an effective advantage on the external noise rejection of the system during quantum evolution. Using advanced fabrication techniques it is now possible to build Josephson junction arrays made of superconducting unconventional loops. On this basis, a new qubit device can be designed as a ring array of unconventional loops. From a theoretical point of view this device is analogous to an annular Josephson junction, but with a "built in" natural degeneracy. For their topological and energetical properties, such arrays could be excellent devices for the qubit circuitry usable as the basic building blocks for quantum computing devices. In this work, we show how some of the principles of qubit design could be implemented in such devices.
Superconducting qubits have in recent years become a promising candidate for the implementation of a quantum computer due to their design flexibility, good protection from decohering elementary excitations, and availability of well developed fabrication and measurement techniques. Superconducting flux qubits, for which the effect of offset charge noise is reduced due to the fact that the Josephson energy dominates over the charging energy, correspond to one of the proposed means of designing a superconducting qubit. A nonlinear dispersive readout scheme of flux qubits involving a DC SQUID magnetometer that avoids the effects of on-chip dissipation can be readily implemented, yielding high contrast output for single qubit readout. Coupling schemes via nonlinear Josephson elements have also been realized. On the other hand, while the means of isolating superconducting qubits from external noise sources has been found, the mechanisms by which they undergo relaxation and decoherence due to intrinsic noise sources in the junctions themselves are not very well understood, and the question of how to deal with these noise sources remains unanswered in the general case. Other questions deal with the problem of experimentally observing entanglement in an array of coupled superconducting qubits, and finding the means by which the existence of entanglement in a typical laboratory setup may to some extent be verified by measurements on a global scale. Following a brief introductory review, we will first investigate the influence of a Two-Level Fluctuator on a DC SQUID driven by a finite current bias. Then we introduce a directly measurable signature of multiqubit entanglement for a large system of qubits and show that it is compatible to a recently introduced measure of global entanglement.
The superconducting qubit quantum computer is one of the most promising quantum computing architectures for large-scale integration due to its maturity and close proximity to the well-established semiconductor manufacturing infrastructure. From an education perspective, it also bridges classical microwave electronics and quantum electrodynamics. In this paper, we will review the basics of quantum computers, superconductivity, and Josephson junctions. We then introduce important technologies and concepts related to DiVincenzo's criteria, which are the necessary conditions for the superconducting qubits to work as a useful quantum computer. Firstly, we will discuss various types of superconducting qubits formed with Josephson junctions, from which we will understand the trade-off across multiple design parameters, including their noise immunity. Secondly, we will discuss different schemes to achieve entanglement gate operations, which are a major bottleneck in achieving more efficient fault-tolerant quantum computing. Thirdly, we will review readout engineering, including the implementations of the Purcell filters and quantum-limited amplifiers. Finally, we will discuss the nature and review the studies of two-level system defects, which are currently the limiting factor of qubit coherence time. DiVincenzo's criteria are only the necessary conditions for a technology to be eligible for quantum computing. To have a useful quantum computer, large-scale integration is required. We will review proposals and developments for the large-scale integration of superconducting qubit devices. By comparing with the application of electronic design automation (EDA) in semiconductors, we will also review the use of EDA in superconducting qubit quantum computer design, which is necessary for its large-scale integration.
The theory of superconducting phase qubits---also known as current-biased Josephson junctions---is presented. In the first part of this thesis, I introduce quantum computation, quantum simulation, and their deep connection with symplectic integration. I then consider the fundamental many-body theory of superconductivity and Josephson junctions and show how the quantum dynamics of a single macroscopic degree of freedom, the gauge invariant phase difference, emerges. A complete study of the Hilbert space structure of such a variable is performed for the current-biased junction. The resulting resonance structure is studied in detail, using various formalisms including the WKB approximation, instanton methods, the complex scaling transformation, basis set stabilization, numerical integration, and dynamical simulation using Lie algebraic wave-packet propagation. The second part of this thesis explores how the current-biased junction can be used as an element of a quantum computer---a quantum bit (qubit). Single qubit operations are studied, followed by the presentation of the theory of coupled qubit devices. My key result is the design and optimization of quantum logic gates with high fidelity (F ~ 0.9999) for capacitively coupled phase qubits with short gate times (~ 10 ns). Finally, I examine an advanced qubit-coupling scheme, a resonant coupling method utilizing a harmonic oscillator as the auxiliary degree of freedom. The models and methods presented here have been developed in direct collaboration with an experimental program. These experiments are the first to show spectroscopic evidence for entanglement between two and three macroscopic degrees of freedom in a superconducting circuit.