Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:cond-mat/0506663 · Superconductor Science and Technology

Superconducting tunable flux qubit with direct readout scheme

F. Chiarello, Pasquale Carelli, Maria Gabriella Castellano, Carlo Cosmelli, Lorenzo Gangemi, Roberto Leoni, Stefano Poletto, Daniela Simeone, G. Torrioli

Published Aug 25, 2005• 11 citations
arXivHTMLPDF

Abstract

We describe a simple and efficient scheme for the readout of a tunable flux qubit, and present preliminary experimental tests for the preparation, manipulation and final readout of the qubit state, performed in the incoherent regime at liquid helium temperature. The tunable flux qubit is realized by a double SQUID with an extra Josephson junction inserted in the large superconducting loop, and the readout is performed by applying a current ramp to the junction and recording the value for which there is a voltage response, depending on the qubit state. This preliminary work indicates the feasibility and efficiency of the scheme.

DOI
10.1088/0953-2048/18/10/021

Related papers

Manipulation And Readout Of A Tunable Flux Qubit With Integrated Readout: Preliminary Results

C. Cosmelli, Pasquale Carelli, Maria Gabriella Castellano +6 more

We show a tunable flux qubit with built‐in readout, realized with a double SQUID with a supplementary Josephson junction. State preparation and manipulation of the qubit are achieved by applying pulses of magnetic flux in two externally coupled coils, a feature that suits very well with a future integration with RSFQ integrated logic. We show how the system can be read out and prepared in a definite flux state, moreover we show the results of manipulation (lowering of the potential barrier between states) in incoherent regime at liquid helium temperature.

AIP conference proceedings•Jan 1, 2006•0 citations

A New Flux/Phase Qubit With Integrated Readout

Maria Gabriella Castellano, F. Chiarello, Roberto Leoni +7 more

We propose a new scheme for a flux/phase qubit, based on a double-SQUID modified to achieve a direct readout of the flux state. The readout is performed by inserting a large Josephson junction in the SQUID loop; the junction is biased by an external current and switches from the zero-voltage to the running state depending on the flux state of the qubit. We report recent results concerning the theoretical behavior and the experimental characterization at 4.2 K of the device, which has been realized with Nb/AlOx/Nb trilayer technology.

IEEE Transactions on Applied Superconductivity•Jun 1, 2005•6 citations

Working Point Adjustable DC-SQUID for the Readout of Gap Tunable Flux Qubit

Hui Deng, Yulin Wu, Yarui Zheng +6 more

In flux qubits, qubit states are commonly read out by a dc superconducting quantum interference device (SQUID), which is inductively coupled to the qubit and works as a persistent current detector. However, neither the bottom nor the top regions of the critical current modulation curve of the SQUID can be used for the readout. In this paper, we show that a flux-trap loop inserted to the readout SQUID provides the ability to adjust the working point, which helps to avoid this constraint. This improvement is useful for some complicated flux qubit experiments.

IEEE Transactions on Applied Superconductivity•Feb 3, 2015•7 citations

Controllable Coupling of Superconducting Flux Qubits

S. H. W. van der Ploeg, A. Izmalkov, Alec Maassen van den Brink +5 more

We have realized controllable coupling between two three-junction flux qubits by inserting an additional coupler loop between them, containing three Josephson junctions. Two of these are shared with the qubit loops, providing strong qubit-coupler interaction. The third junction gives the coupler a nontrivial current-flux relation; its derivative (i.e., the susceptibility) determines the coupling strength J, which thus is tunable in situ via the coupler's flux bias. In the qubit regime, J was varied from approximately 45 (antiferromagnetic) to approximately -55 mK (ferromagnetic); in particular, J vanishes for an intermediate coupler bias. Measurements on a second sample illuminate the relation between two-qubit tunable coupling and three-qubit behavior.

arXiv:cond-mat/0605588•Physical Review Letters•Feb 2, 2007•188 citations

Fluxon readout for superconducting flux qubits

Kirill G. Fedorov

This thesis presents experimental studies on developing of a novel fluxon readout for superconducting flux qubits. It is based on a scheme for detecting the microwave radiation of an oscillating fluxon in an annular Josephson junction (AJJ). The readout was implemented for a superconducting flux qubit coupled as a current dipole to the AJJ. An energy spectrum of the flux qubit was measured via detecting a frequency shift of the fluxon oscillations versus a flux bias through the qubit.

•Jan 1, 2013•0 citations

Flux qubit with a large loop size and tunable Josephson junctions

Hui Deng, Haifeng Yu, Guangming Xue +6 more

We present the design of a superconducting flux qubit with a large loop inductance. The large loop inductance is desirable for coupling between qubits. The loop is configured into a gradiometer form that could reduce the interference from environmental magnetic noise. A combined Josephson junction, i.e., a DC-SQUID is used to replace the small Josephson junction in the usual 3-JJ (Josephaon junction) flux qubit, leading to a tunable energy gap by using an independent external flux line. We perform numerical calculations to investigate the dependence of the energy gap on qubit parameters such as junction capacitance, critical current, loop inductance, and the ratio of junction energy between small and large junctions in the flux qubit. We suggest a range of values for the parameters.

Chinese Physics B•Apr 1, 2012•2 citations
We describe a simple and efficient scheme for the readout of a tunable flux qubit, and present preliminary experimental tests for the preparation, manipulation and final readout of the qubit state, performed in the incoherent regime at liquid helium temperature. The tunable flux qubit is realized by a double SQUID with an extra Josephson junction inserted in the large superconducting loop, and the readout is performed by applying a current ramp to the junction and recording the value for which there is a voltage response, depending on the qubit state. This preliminary work indicates the feasibility and efficiency of the scheme.
We show a tunable flux qubit with built‐in readout, realized with a double SQUID with a supplementary Josephson junction. State preparation and manipulation of the qubit are achieved by applying pulses of magnetic flux in two externally coupled coils, a feature that suits very well with a future integration with RSFQ integrated logic. We show how the system can be read out and prepared in a definite flux state, moreover we show the results of manipulation (lowering of the potential barrier between states) in incoherent regime at liquid helium temperature.
We propose a new scheme for a flux/phase qubit, based on a double-SQUID modified to achieve a direct readout of the flux state. The readout is performed by inserting a large Josephson junction in the SQUID loop; the junction is biased by an external current and switches from the zero-voltage to the running state depending on the flux state of the qubit. We report recent results concerning the theoretical behavior and the experimental characterization at 4.2 K of the device, which has been realized with Nb/AlOx/Nb trilayer technology.
In flux qubits, qubit states are commonly read out by a dc superconducting quantum interference device (SQUID), which is inductively coupled to the qubit and works as a persistent current detector. However, neither the bottom nor the top regions of the critical current modulation curve of the SQUID can be used for the readout. In this paper, we show that a flux-trap loop inserted to the readout SQUID provides the ability to adjust the working point, which helps to avoid this constraint. This improvement is useful for some complicated flux qubit experiments.
We have realized controllable coupling between two three-junction flux qubits by inserting an additional coupler loop between them, containing three Josephson junctions. Two of these are shared with the qubit loops, providing strong qubit-coupler interaction. The third junction gives the coupler a nontrivial current-flux relation; its derivative (i.e., the susceptibility) determines the coupling strength J, which thus is tunable in situ via the coupler's flux bias. In the qubit regime, J was varied from approximately 45 (antiferromagnetic) to approximately -55 mK (ferromagnetic); in particular, J vanishes for an intermediate coupler bias. Measurements on a second sample illuminate the relation between two-qubit tunable coupling and three-qubit behavior.
We present the design of a superconducting flux qubit with a large loop inductance. The large loop inductance is desirable for coupling between qubits. The loop is configured into a gradiometer form that could reduce the interference from environmental magnetic noise. A combined Josephson junction, i.e., a DC-SQUID is used to replace the small Josephson junction in the usual 3-JJ (Josephaon junction) flux qubit, leading to a tunable energy gap by using an independent external flux line. We perform numerical calculations to investigate the dependence of the energy gap on qubit parameters such as junction capacitance, critical current, loop inductance, and the ratio of junction energy between small and large junctions in the flux qubit. We suggest a range of values for the parameters.