Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:cond-mat/0006060 · Journal of Applied Physics

Nonperiodic flux to voltage conversion of series arrays of dc superconducting quantum interference devices

Ch. Häussler, Jörg Oppenländer, Nils Schopohl

Published Feb 1, 2001• 66 citations
arXivHTMLPDF

Abstract

We present a theoretical study on the voltage response function 〈V〉 of series arrays of dc superconducting quantum interference devices (SQUIDs) for which the elementary dc SQUID loops vary in size and, possibly, in orientation. If the distribution of the array loop sizes is chosen according to an arithmetic relation, 〈V〉 is not a Φ0-periodic function of the strength of external magnetic field B. For arithmetic arrays the periodicity of 〈V〉 is controlled by the geometry of the array alone and does not depend on spreads in the array junction parameters. If small fluctuations are added to the loop size distribution, 〈V〉 becomes a unique function around a global minimum at B=0 without possessing significant additional minima for finite B. This filter property does not apply for conventional SQUIDs and series arrays of identical or nearly identical SQUID loops. Applications of arithmetic series arrays include the design of current amplifiers and novel quantum interference filters, which possess large voltage swing and low noise level. In particular, quantum interference filters should provide a rather simple and extremely sensitive measurement of the absolute strength of magnetic fields.

DOI
10.1063/1.1334374

Related papers

Superconducting multiple loop quantum interferometers

Jörg Oppenländer, T. Träuble, Ch. Häussler +1 more

We present experimental results on the magnetic field B dependent voltage response V(B) of a number of N resistively shunted Josephson junctions connected in parallel by a multiple loop network. For an appropriate distribution of the array loop sizes, such networks constitute superconducting quantum interference filters (SQIFs) with voltage response functions V(B) that are not /spl Phi//sub 0/-periodic. The voltage response of SQIFs is a unique function around a global minimum at B=0 that has a high sensitivity and a low noise level. In contrast to conventional superconducting quantum interference devices, SQIFs can be directly employed as highly sensitive magnetometers allowing the absolute measurement of magnetic fields. The experimental results are in very good agreement with the theoretical predictions on which basis the SQIF has been fabricated, All findings suggest that superconducting quantum interference filters may allow the design of novel superconducting devices.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•48 citations

Fraunhofer regime of operation for superconducting quantum interference filters

A. V. Shadrin, K. Y. Constantinian, G. A. Ovsyannikov +4 more

Series arrays of superconducting quantum interference devices (SQUIDs) with incommensurate loop areas, so-called superconducting quantum interference filters (SQIFs), are investigated in the kilohertz and the gigahertz frequency range. In SQIFs made of high-Tc bicrystal junctions the flux-to-voltage response ∂V/∂Φ is dominated by the variation in the critical current in the individual junctions (Fraunhofer-type) rather than by the SQUIDs interference. For a SQIF with 20 SQUID loops we find ∂V/∂Φ=40 mV/Φ0 and a dynamic range of more than 60 dB in the kilohertz range. In the 1–2 GHz range the estimated power gain is 20 dB and the magnetic flux noise level is as low as 10−4Φ0.

arXiv:0806.4839•Applied Physics Letters•Dec 29, 2008•9 citations

Array of Superconducting Quantum Interference Devices with Multiturn Input Coil

T. Morooka, Hiroaki Myoren, S. Takada +1 more

Arrays of dc-superconducting quantum interference devices (dc-SQUIDs) were investigated, in which each dc-SQUID element has a multiturn input coil. The dependence of flux noise on the number of turns of the input coil was studied for current amplifiers. SQUID arrays were fabricated by a Nb/AlO x /Nb Josephson tunnel junction fabrication process. Results show that the flux noise of the SQUID array amplifier does not depend on the turn number of the input coil. A SQUID array amplifier consisting of 128 dc-SQUID elements was fabricated, in which each element had a 7-turn input coil and a mutual inductance between the input coil and the SQUID loop of 460 pH. This amplifier showed an ultrahigh current resolution of 1 pA/Hz0.5 and a maximum input current of 11 µA for signals of 50 kHz, which is sufficient bandwidth for X-ray detection applications. These values correspond to a large dynamic range of 87 dB. The flux-voltage characteristics of this SQUID array, however, showed asymmetric behavior, which originated from electronic resonance in stray capacitance and the mutual inductance between the SQUID loop and the multiturn input coil.

Japanese Journal of Applied Physics•May 1, 2004•3 citations

Two dimensional superconducting quantum interference filters

Jörg Oppenländer, Ch. Häussler, T. Träuble +4 more

We have successfully developed a novel superconducting quantum interferometer based on Josephson junction networks with unconventional loop size distribution. For distinct theoretically determined distributions, the magnetic field B dependent dc voltage V(B) of the interferometer possesses a unique delta-peak like characteristics around B=0. Such devices are called Superconducting Quantum Interference Filters (SQIFs). The unique voltage response of SQIFs allows novel applications, e.g., absolute magnetic field sensors, high speed logical switches and non hysteretic low noise amplifiers which can be directly connected to standard room temperature electronics. In this paper we present new experimental and theoretical results on high performance two dimensional Superconducting Quantum Interference Filters (2D SQIFs). Such 2D SQIFs can be used as absolute magnetic field sensors. Our results indicate that due to the scaling behavior of the flux to voltage transfer function and the scaling of the white output noise, a highly sensitive absolute field sensor based on 2D SQIFs can be very small in size.

IEEE Transactions on Applied Superconductivity•Jun 1, 2003•30 citations

Coupled Serial and Parallel Non-uniform SQUIDs

Patrick Longhini, Susan A. E. Berggren, Antonio Palacios +5 more

In this work we numerical model series and parallel non‐uniform superconducting quantum interference device (SQUID) array. Previous work has shown that series SQUID array constructed with a random distribution of loop sizes, (i.e. different areas for each SQUID loop) there exists a unique ‘anti‐peak’ at the zero magnetic field for the voltage versus applied magnetic field (V‐B). Similar results extend to a parallel SQUID array where the difference lies in the arrangement of the Josephson junctions. Other system parameter such as bias current, the number of loops, and mutual inductances are varied to demonstrate the change in dynamic range and linearity of the V‐B response. Application of the SQUID array as a low noise amplifier (LNA) would increase link margins and affect the entire communication system. For unmanned aerial vehicles (UAVs), size, weight and power are limited, the SQUID array would allow use of practical ‘electrically small’ antennas that provide acceptable gain.

AIP conference proceedings•Jan 1, 2011•0 citations

Superconducting Quantum Interference Filters as RF Amplifiers

Oleg V. Snigirev, M. L. Chukharkin, Alexey S. Kalabukhov +4 more

The superconducting quantum interference filter (SQIF) is a new type of superconducting device which has been recently proposed for highly sensitive magnetometers for absolute magnetic field measurements. It benefits of very high voltage-to-field response, which is, in contrast conventional dc SQUIDs, not periodical. The SQIF can also be used as a radiofrequency amplifier in a similar way as the dc SQUID that can operate in a gigahertz frequency range. We designed a series type of SQIF amplifier that is compatible to conventional YBa2Cu3O7(YBCO) technology on bicrystal substrates. We present analytical, numerical and scale modeling as well as first electrical measurements results at frequencies up to 10 GHz. The SQIF array consists of 50 loops with randomly distributed areas from 0.5 to 1.5 times of . We also compared it to the regular array of conventional SQUIDs with the same loop areas. We have additional dc contacts to each 5-th SQUIDs and the SQIFs for control and comparison. Devices are fabricated using Josephson junctions with 3 mum width formed in YBCO over 24/24 and 12/12 degrees grain boundaries in yttrium-stabilized zirconia (YSZ) bicrystal substrates.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•22 citations
We present a theoretical study on the voltage response function 〈V〉 of series arrays of dc superconducting quantum interference devices (SQUIDs) for which the elementary dc SQUID loops vary in size and, possibly, in orientation. If the distribution of the array loop sizes is chosen according to an arithmetic relation, 〈V〉 is not a Φ0-periodic function of the strength of external magnetic field B. For arithmetic arrays the periodicity of 〈V〉 is controlled by the geometry of the array alone and does not depend on spreads in the array junction parameters. If small fluctuations are added to the loop size distribution, 〈V〉 becomes a unique function around a global minimum at B=0 without possessing significant additional minima for finite B. This filter property does not apply for conventional SQUIDs and series arrays of identical or nearly identical SQUID loops. Applications of arithmetic series arrays include the design of current amplifiers and novel quantum interference filters, which possess large voltage swing and low noise level. In particular, quantum interference filters should provide a rather simple and extremely sensitive measurement of the absolute strength of magnetic fields.
We present experimental results on the magnetic field B dependent voltage response V(B) of a number of N resistively shunted Josephson junctions connected in parallel by a multiple loop network. For an appropriate distribution of the array loop sizes, such networks constitute superconducting quantum interference filters (SQIFs) with voltage response functions V(B) that are not /spl Phi//sub 0/-periodic. The voltage response of SQIFs is a unique function around a global minimum at B=0 that has a high sensitivity and a low noise level. In contrast to conventional superconducting quantum interference devices, SQIFs can be directly employed as highly sensitive magnetometers allowing the absolute measurement of magnetic fields. The experimental results are in very good agreement with the theoretical predictions on which basis the SQIF has been fabricated, All findings suggest that superconducting quantum interference filters may allow the design of novel superconducting devices.
Series arrays of superconducting quantum interference devices (SQUIDs) with incommensurate loop areas, so-called superconducting quantum interference filters (SQIFs), are investigated in the kilohertz and the gigahertz frequency range. In SQIFs made of high-Tc bicrystal junctions the flux-to-voltage response ∂V/∂Φ is dominated by the variation in the critical current in the individual junctions (Fraunhofer-type) rather than by the SQUIDs interference. For a SQIF with 20 SQUID loops we find ∂V/∂Φ=40 mV/Φ0 and a dynamic range of more than 60 dB in the kilohertz range. In the 1–2 GHz range the estimated power gain is 20 dB and the magnetic flux noise level is as low as 10−4Φ0.
Arrays of dc-superconducting quantum interference devices (dc-SQUIDs) were investigated, in which each dc-SQUID element has a multiturn input coil. The dependence of flux noise on the number of turns of the input coil was studied for current amplifiers. SQUID arrays were fabricated by a Nb/AlO x /Nb Josephson tunnel junction fabrication process. Results show that the flux noise of the SQUID array amplifier does not depend on the turn number of the input coil. A SQUID array amplifier consisting of 128 dc-SQUID elements was fabricated, in which each element had a 7-turn input coil and a mutual inductance between the input coil and the SQUID loop of 460 pH. This amplifier showed an ultrahigh current resolution of 1 pA/Hz0.5 and a maximum input current of 11 µA for signals of 50 kHz, which is sufficient bandwidth for X-ray detection applications. These values correspond to a large dynamic range of 87 dB. The flux-voltage characteristics of this SQUID array, however, showed asymmetric behavior, which originated from electronic resonance in stray capacitance and the mutual inductance between the SQUID loop and the multiturn input coil.
We have successfully developed a novel superconducting quantum interferometer based on Josephson junction networks with unconventional loop size distribution. For distinct theoretically determined distributions, the magnetic field B dependent dc voltage V(B) of the interferometer possesses a unique delta-peak like characteristics around B=0. Such devices are called Superconducting Quantum Interference Filters (SQIFs). The unique voltage response of SQIFs allows novel applications, e.g., absolute magnetic field sensors, high speed logical switches and non hysteretic low noise amplifiers which can be directly connected to standard room temperature electronics. In this paper we present new experimental and theoretical results on high performance two dimensional Superconducting Quantum Interference Filters (2D SQIFs). Such 2D SQIFs can be used as absolute magnetic field sensors. Our results indicate that due to the scaling behavior of the flux to voltage transfer function and the scaling of the white output noise, a highly sensitive absolute field sensor based on 2D SQIFs can be very small in size.
In this work we numerical model series and parallel non‐uniform superconducting quantum interference device (SQUID) array. Previous work has shown that series SQUID array constructed with a random distribution of loop sizes, (i.e. different areas for each SQUID loop) there exists a unique ‘anti‐peak’ at the zero magnetic field for the voltage versus applied magnetic field (V‐B). Similar results extend to a parallel SQUID array where the difference lies in the arrangement of the Josephson junctions. Other system parameter such as bias current, the number of loops, and mutual inductances are varied to demonstrate the change in dynamic range and linearity of the V‐B response. Application of the SQUID array as a low noise amplifier (LNA) would increase link margins and affect the entire communication system. For unmanned aerial vehicles (UAVs), size, weight and power are limited, the SQUID array would allow use of practical ‘electrically small’ antennas that provide acceptable gain.
The superconducting quantum interference filter (SQIF) is a new type of superconducting device which has been recently proposed for highly sensitive magnetometers for absolute magnetic field measurements. It benefits of very high voltage-to-field response, which is, in contrast conventional dc SQUIDs, not periodical. The SQIF can also be used as a radiofrequency amplifier in a similar way as the dc SQUID that can operate in a gigahertz frequency range. We designed a series type of SQIF amplifier that is compatible to conventional YBa2Cu3O7(YBCO) technology on bicrystal substrates. We present analytical, numerical and scale modeling as well as first electrical measurements results at frequencies up to 10 GHz. The SQIF array consists of 50 loops with randomly distributed areas from 0.5 to 1.5 times of . We also compared it to the regular array of conventional SQUIDs with the same loop areas. We have additional dc contacts to each 5-th SQUIDs and the SQIFs for control and comparison. Devices are fabricated using Josephson junctions with 3 mum width formed in YBCO over 24/24 and 12/12 degrees grain boundaries in yttrium-stabilized zirconia (YSZ) bicrystal substrates.