© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:cond-mat/0004293

Detection of a Schroedinger's Cat State in an rf-SQUID

Jonathan R. Friedman, Vijay Patel, W. Chen, Sergey K. Tolpygo, James E. Lukens

Published Apr 18, 2000• 9 citations

Abstract

We present experimental evidence for a coherent superposition of macroscopically distinct flux states in an rf-SQUID. When the external flux Phi_x applied to the SQUID is near 1/2 of a flux quantum Phi_0, the SQUID has two nearly degenerate configurations: the zero- and one-fluxoid states, corresponding to a few microamperes of current flowing clockwise or counterclockwise, respectively. The system is modeled as a particle in a double-well potential where each well represents a distinct fluxoid state (0 or 1) and the barrier between the wells can be controlled in situ. For low damping and a sufficiently high barrier, the system has a set of quantized energy levels localized in each well. The relative energies of these levels can be varied with Phi_x. External microwaves are used to pump the system from the well-localized ground state of one well into one of a pair of excited states nearer the top of the barrier. We spectroscopically map out the energy of these levels in the neighborhood of their degeneracy point by varying Phi_x as well as the barrier height. We find a splitting between the two states at this point, when both states are below the classical energy barrier, indicating that the system attains a coherent superposition of flux basis states that are macroscopically distinct in that their mean fluxes differ by more than 1/4 Phi_0 and their currents differ by several microamperes.

DOI: 10.48550/arxiv.cond-mat/0004293

Related papers

Studies of Quantum Transitions of Magnetic Flux in a RF Squid Qubit

Luigi Longobardi

At low temperature and low damping, the magnetic flux of a rf Superconducting QUantum Interference Device (SQUID) acts as a macroscopic quantum variable whose dynamic is described by a double well potential. A rf SQUID consists of a superconducting loop interrupted by a thin insulating barrier, known as a Josephson junction. The modified rf SQUID design discussed in this thesis has independent, in situ, controls that allow varying the barrier height between the potential wells and their relative tilt. This high level of control of the potential together with the capability to implement an experimental setup optimized to reduce coupling to external sources of noise, made this system ideal not only for tests of quantum transition at a macroscopic level, but also as a scalable solid state device for quantum computation. A variety of measurements of quantum phenomena are reported in this thesis, including microwave level spectroscopy, coherent oscillations, and macroscopic resonant tunneling (MRT). These measurements are compared with theoretical models to study the possible sources of decoherence in a rf SQUID qubit. The analysis confirmed that the main source of decoherence is not due to coupling to the external environment, but it can be linked to intrinsic low frequency flux noise. Work from many groups over the last several years has shown that the performance of a superconductive qubit is limited by coupling to spurious defects in the materials used for the device fabrication. In this work we analyze the possibility of using the MRT as a tool for future studies of effects of materials and fabrication process in the realization of improved qubits, and we also explore the feasibility for measurements of quantum phenomena that involve fast pulsing of the potential barrier height.

•Oct 22, 2010•0 citations

Quantum detector based on a superposition of macroscopic states in a phase qubit

V. I. Shnyrkov, Сергей Иванович Мельник

A quantum detector whose working principle is based on magnetic-field modulation of a circulating supercurrent in the quantum ground state of a macroscopic superconducting loop with a Josephson junction. Under the influence of an external magnetic flux equal to Φ0∕2 (or Φ0), two (or three) classical states are coupled to each other by quantum tunneling through a potential barrier, and therefore the detector is a two-level (or three-level) system. In the low-temperature region and under the condition of very weak damping, the mean value of the circulating supercurrent reflects the character of the variation of the quantum superposition of macroscopic states, which is sensitive to the symmetry of the potential. The variations of the current are amplified and detected in a measurement scheme similar to the signal registration in a nonhysteretic rf SQUID. It is shown by a numerical analysis that in comparison with a qubit detector based on an SIS junction, a detector with an ScS junction is faster and has much larger amplitudes of energy splitting at the same parameters. The results presented for double- and triple-well potentials clearly indicate that a qubit with an ScS junction can act as a detector with a sensitivity determined by the quantum noise of the amplifier.

Low Temperature Physics•Jan 1, 2007•10 citations

An integrated system of SQUIDs for the study of macroscopic quantum coherence

C. Cosmelli, Maria Gabriella Castellano, Roberto Leoni +3 more

The observation and study of macroscopic quantum coherence (MQC), i.e. the coherent superposition and evolution of macroscopically distinct quantum states, is of great importance for both our understanding of nature and for quantum engineering, for example in quantum computing. Recently a first indication of MQC in a system of SQUIDs has been indirectly observed by means of spectroscopic techniques. Applications like quantum computing, however, require the manipulation and the observation of the time evolution of the MQC states. We have realized a system of SQUIDs for the study of MQC. Our system, based on trilayer Nb/AlOx/Nb technology, consists of a double rf-SQUID, source of the MQC state, inductively coupled to a non-hysteretic dc-SQUID magnetometer and to a hysteretic dc-SQUID threshold detector, used for the read-out of the magnetic flux state. The magnetometer is used to test and monitor the rf-SQUID behaviour, while the hysteretic dc-SQUID is used to perform fast measurements with a reduced back action on the rf-SQUID. We present measurements performed at 4.2 K and at 20 mK to characterize the single devices and their overall behaviour, and a scheme for the use of a set of SQUIDs as a qubit system.

Superconductor Science and Technology•Nov 21, 2001•7 citations

Observation of Resonant Tunneling between Macroscopically Distinct Quantum Levels

R. Rouse, Siyuan Han, James E. Lukens

We report the first observation of resonant tunneling of a system between two macroscopically distinct states: energy levels in different fluxoid wells of a weakly damped superconducting quantum interference device which differ in mean current by approximately 6 \ensuremath{\mu}A. Near 50 mK, the tunneling rate $\ensuremath{\gamma}({\ensuremath{\Phi}}_{x})$ from the metastable well vs applied flux ${\ensuremath{\Phi}}_{x}$ is found to exhibit a series of local maxima where the levels (spaced by $\ensuremath{\approx}1.9$ K) in the two wells cross. The positions of these maxima agree well with the level crossings calculated using independently determined system parameters.

Physical Review Letters•Aug 21, 1995•206 citations

Resonance phenomena in macroscopic quantum tunneling for an rf SQUID

Yu. N. Ovchinnikov, P. Silvestrini, Valentina Corato +1 more

We consider the theoretical problem of resonant phenomena in the macroscopic quantum tunneling for an rf superconducting quantum interference device in the presence of an external irradiating field. The transition probability between different flux states is studied by varying the external parameters of the double-well potential describing the system in a way that the pumping level in the left potential well is close to one of the levels in the right potential well. The dependence of the transition probability on the external drive of the system shows two resonance peaks, the former connected with the resonant tunneling and the latter with the resonant pumping. The relative position of the peaks depends on the pumping frequency $\ensuremath{\omega}$ and on the system parameters.

Physical Review B•Jan 28, 2005•9 citations

Observation of macroscopic quantum tunnelling in a rf superconducting quantum interference device system

Valentina Corato, S. Rombetto, P. Silvestrini +3 more

We present the experimental observation of the effects of macroscopic quantum tunnelling in a SQUID device, consisting of a rf SQUID coupled to a readout system based on a dc SQUID sensor. Data on the decay rate from the metastable flux states of a rf SQUID are reported, both in the classical and quantum regimes. The low dissipation level and the good insulation of the probe from external noise are encouraging in view of building a macroscopic quantum coherent system.

Superconductor Science and Technology•Apr 15, 2004•9 citations

We present experimental evidence for a coherent superposition of macroscopically distinct flux states in an rf-SQUID. When the external flux Phi_x applied to the SQUID is near 1/2 of a flux quantum Phi_0, the SQUID has two nearly degenerate configurations: the zero- and one-fluxoid states, corresponding to a few microamperes of current flowing clockwise or counterclockwise, respectively. The system is modeled as a particle in a double-well potential where each well represents a distinct fluxoid state (0 or 1) and the barrier between the wells can be controlled in situ. For low damping and a sufficiently high barrier, the system has a set of quantized energy levels localized in each well. The relative energies of these levels can be varied with Phi_x. External microwaves are used to pump the system from the well-localized ground state of one well into one of a pair of excited states nearer the top of the barrier. We spectroscopically map out the energy of these levels in the neighborhood of their degeneracy point by varying Phi_x as well as the barrier height. We find a splitting between the two states at this point, when both states are below the classical energy barrier, indicating that the system attains a coherent superposition of flux basis states that are macroscopically distinct in that their mean fluxes differ by more than 1/4 Phi_0 and their currents differ by several microamperes.

At low temperature and low damping, the magnetic flux of a rf Superconducting QUantum Interference Device (SQUID) acts as a macroscopic quantum variable whose dynamic is described by a double well potential. A rf SQUID consists of a superconducting loop interrupted by a thin insulating barrier, known as a Josephson junction. The modified rf SQUID design discussed in this thesis has independent, in situ, controls that allow varying the barrier height between the potential wells and their relative tilt. This high level of control of the potential together with the capability to implement an experimental setup optimized to reduce coupling to external sources of noise, made this system ideal not only for tests of quantum transition at a macroscopic level, but also as a scalable solid state device for quantum computation. A variety of measurements of quantum phenomena are reported in this thesis, including microwave level spectroscopy, coherent oscillations, and macroscopic resonant tunneling (MRT). These measurements are compared with theoretical models to study the possible sources of decoherence in a rf SQUID qubit. The analysis confirmed that the main source of decoherence is not due to coupling to the external environment, but it can be linked to intrinsic low frequency flux noise. Work from many groups over the last several years has shown that the performance of a superconductive qubit is limited by coupling to spurious defects in the materials used for the device fabrication. In this work we analyze the possibility of using the MRT as a tool for future studies of effects of materials and fabrication process in the realization of improved qubits, and we also explore the feasibility for measurements of quantum phenomena that involve fast pulsing of the potential barrier height.

A quantum detector whose working principle is based on magnetic-field modulation of a circulating supercurrent in the quantum ground state of a macroscopic superconducting loop with a Josephson junction. Under the influence of an external magnetic flux equal to Φ0∕2 (or Φ0), two (or three) classical states are coupled to each other by quantum tunneling through a potential barrier, and therefore the detector is a two-level (or three-level) system. In the low-temperature region and under the condition of very weak damping, the mean value of the circulating supercurrent reflects the character of the variation of the quantum superposition of macroscopic states, which is sensitive to the symmetry of the potential. The variations of the current are amplified and detected in a measurement scheme similar to the signal registration in a nonhysteretic rf SQUID. It is shown by a numerical analysis that in comparison with a qubit detector based on an SIS junction, a detector with an ScS junction is faster and has much larger amplitudes of energy splitting at the same parameters. The results presented for double- and triple-well potentials clearly indicate that a qubit with an ScS junction can act as a detector with a sensitivity determined by the quantum noise of the amplifier.

The observation and study of macroscopic quantum coherence (MQC), i.e. the coherent superposition and evolution of macroscopically distinct quantum states, is of great importance for both our understanding of nature and for quantum engineering, for example in quantum computing. Recently a first indication of MQC in a system of SQUIDs has been indirectly observed by means of spectroscopic techniques. Applications like quantum computing, however, require the manipulation and the observation of the time evolution of the MQC states. We have realized a system of SQUIDs for the study of MQC. Our system, based on trilayer Nb/AlOx/Nb technology, consists of a double rf-SQUID, source of the MQC state, inductively coupled to a non-hysteretic dc-SQUID magnetometer and to a hysteretic dc-SQUID threshold detector, used for the read-out of the magnetic flux state. The magnetometer is used to test and monitor the rf-SQUID behaviour, while the hysteretic dc-SQUID is used to perform fast measurements with a reduced back action on the rf-SQUID. We present measurements performed at 4.2 K and at 20 mK to characterize the single devices and their overall behaviour, and a scheme for the use of a set of SQUIDs as a qubit system.

We report the first observation of resonant tunneling of a system between two macroscopically distinct states: energy levels in different fluxoid wells of a weakly damped superconducting quantum interference device which differ in mean current by approximately 6 \ensuremath{\mu}A. Near 50 mK, the tunneling rate $\ensuremath{\gamma}({\ensuremath{\Phi}}_{x})$ from the metastable well vs applied flux ${\ensuremath{\Phi}}_{x}$ is found to exhibit a series of local maxima where the levels (spaced by $\ensuremath{\approx}1.9$ K) in the two wells cross. The positions of these maxima agree well with the level crossings calculated using independently determined system parameters.

We consider the theoretical problem of resonant phenomena in the macroscopic quantum tunneling for an rf superconducting quantum interference device in the presence of an external irradiating field. The transition probability between different flux states is studied by varying the external parameters of the double-well potential describing the system in a way that the pumping level in the left potential well is close to one of the levels in the right potential well. The dependence of the transition probability on the external drive of the system shows two resonance peaks, the former connected with the resonant tunneling and the latter with the resonant pumping. The relative position of the peaks depends on the pumping frequency $\ensuremath{\omega}$ and on the system parameters.