Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cambridge University Press eBooks

Trapping and cooling of atoms

C. J. Pethick, H. Smith

Published Nov 29, 2001• 0 citations
Publisher

Abstract

The advent of the laser opened the way to the development of powerful new methods for manipulating and cooling atoms which were exploited in the realization of Bose–Einstein condensation in alkali atom vapours. To set the stage we describe a typical experiment, which is shown schematically in Fig. 4.1. A beam of sodium atoms emerges from an oven at a temperature of about 600 K, corresponding to a speed of about 800 m s –1 , and is then passed through a so-called Zeeman slower, in which the velocity of the atoms is reduced to about 30 m s –1 , corresponding to a temperature of about 1 K. In the Zeeman slower, a laser beam propagates in the direction opposite that of the atomic beam, and the radiation force produced by absorption of photons retards the atoms. Due to the Doppler effect, the frequency of the atomic transition in the laboratory frame is not generally constant, since the atomic velocity varies. However, by applying an inhomogeneous magnetic field designed so that the Doppler and Zeeman effects cancel, the frequency of the transition in the rest frame of the atom may be held fixed. On emerging from the Zeeman slower the atoms are slow enough to be captured by a magneto-optical trap (MOT), where they are further cooled by interactions with laser light to temperatures of order 100 μK. Another way of compensating for the changing Doppler shift is to increase the laser frequency in time, which is referred to as ‘chirping’. In other experiments the MOT is filled by transferring atoms from a second MOT where atoms are captured directly from the vapour.

DOI
10.1017/cbo9780511755583.005

Related papers

Trapping and cooling of atoms

C. J. Pethick, H. Smith

The advent of the laser opened the way to the development of powerful methods for producing and manipulating cold atomic gases. To set the stage we describe a typical experiment, which is shown schematically in Fig. 4.1. A beam of sodium atoms emerges from an oven at a temperature of about 600 K, corresponding to a speed of about 800 m s −1 , and is then passed through a so-called Zeeman slower, in which the velocity of the atoms is reduced to about 30 m s −1 , corresponding to a temperature of about 1 K. In the Zeeman slower, a laser beam propagates in the direction opposite that of the atomic beam, and the radiation force produced by absorption of photons retards the atoms. Due to the Doppler effect, the frequency of the atomic transition in the laboratory frame is not generally constant, since the atomic velocity varies. However, by applying an inhomogeneous magnetic field designed so that the Doppler and Zeeman effects cancel, the frequency of the transition in the rest frame of the atom may be held fixed. On emerging from the Zeeman slower the atoms are slow enough to be captured by a magneto-optical trap (MOT), where they are further cooled by interactions with laser light to temperatures of order 100 μK. Another way of compensating for the changing Doppler shift is to increase the laser frequency in time, which is referred to as ‘chirping’.

Cambridge University Press eBooks•Sep 11, 2008•0 citations

Laser cooling and trapping of argon metastable atomic beam

Juan Carlos Catala

The high velocity of free atoms associated with the thermal motion, together with the velocity distribution of atoms has imposed the ultimate limitation on the precision of ultrahigh resolution spectroscopy. A sample consisting of low velocity atoms would provide a substantial improvement in spectroscopy resolution. To overcome the problem of thermal motion, atomic physicists have pursued two goals; first, the reduction of the thermal motion (cooling); and second, the confinement of the atoms by means of electromagnetic fields (trapping). Cooling carried sufficiently far, eliminates the motional problems, whereas trapping allows for long observation times. In this work the laser cooling and trapping of an argon atomic beam will be discussed. The experiments involve a time-of-flight spectroscopy on metastable argon atoms. Laser deceleration or cooling of atoms is achieved by counter propagating a photon against an atomic beam of metastable atoms. The solution to the Doppler shift problem is achieved using spatially varying magnetic field along the beam path to Zeeman shift the atomic resonance frequency so as to keep the atoms in resonance with a fixed frequency cooling laser. For trapping experiments a Magnetooptical trap (MOT) will be used. The MOT is formed by three pairs of counter-propagating laser beams with mutual opposite circular polarization and a frequency tuned slightly below the center of the atomic resonance and superimposed on a magnetic quadrupole field.

•Nov 21, 1998•0 citations

Atom Dingin dan Penggunaannya

Minarni Minarni

Cooling and Trapping neutral particles or ions using laser beam becomes a new research field inPhysics. This field was started in 1970’s by Ashkin who demonstrated that a focused laser beam ondielectric particles in a glass cell can attract the particles to the focal area because the potenstialenergy there is lower. Cooling which means to reduce the average thermal velocity of atoms orparticles and trapping which means controlling the positions of the atoms can be performed using twokinds of forces from Laser beam i.e. scattering force and gradient force. A scattering force is resultedfrom the laser beam because the laser beam contains fotons which have momentum. The gradientforce appears because of the gradient of intensity around focal area. One of famous atom traps isMagneto-Optical Trap (MOT). MOT uses Doppler effect for cooling and Zeeman effect for trappingWith this technique, cold atoms with temperature in the order of mikro Kelvin can be produced. Coldatom can be used for many applications such as to make Bose Einstein Condensate (BEC), atominterfermetry and atomic clocks.

•Jul 20, 2013•0 citations

Laser Cooling and Trapping of Neutral Atoms

Yvan Castin, Jean Dalibard, Claude N. Cohen-Tannoudji

We present a simple review of the basic physical processes allowing one to control, with laser beams, the velocity and the position of neutral atoms. The control of the velocity corresponds to a cooling of atoms, that is, a reduction of the atomic velocity spread around a given value. The control of the position means a trapping of atoms in real space. The best present performances will be given, in terms of the lowest temperatures and the highest densities. The corresponding highest quantum degeneracy will also be estimated. It is imposed by fundamental limits, which will be described briefly. We also give the general trends in this field of research and outline the new directions which look promising for observing quantum statistical effects in laser cooled atomic samples, but which are for the moment restricted by unsolved problems. Introducing the Simple Schemes The radiative forces acting on atoms in a light field can be split into two parts, a reactive one and a dissipative one. The dissipative force (radiation pressure), which basically involves scattering processes, is velocity dependent. We will see that this dependence leads to the Doppler cooling scheme and to the concept of optical molasses, and we will give the corresponding minimal achievable temperature. The dissipative force can be made position dependent, through a gradient of the magnetic field, so that the atoms are also trapped in the so-called magneto-optical trap.

Cambridge University Press eBooks•Apr 6, 1995•6 citations

Laser cooling and trapping of sodium atoms in the F=1 ground state

Makoto Abe, Yukihide Kato, T. Aoki +3 more

We have developed a new scheme to produce a dense trap of sodium atoms in the magneto-optical trap using the transition of F=1 to F'=0 states. In a conventional Zeeman slower a bias magnetic field is applied in the deceleration region to prevent the optical pumping to the F=1 state, so that sodium atoms interact with the cooling radiation of F=2 to F'=3. As a result, many of slow atoms in the F=2 state continue to decelerate adiabatically even at the exit of the solenoid and remain inside the magnetic field. However, slow atoms could be extracted outside the magnetic field, if they are transferred to the F=1 state by the optical pumping via the F'=2 state. Therefore, we reduced the strength of the bias magnetic field. We trapped the slow sodium atoms in the F=1 state directly in the magneto-optical trap.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Jan 20, 2003•0 citations

Decelerating Neutral Dipolar Molecules

Giel Berden, Hendrick L. Bethlem, Gerard Meijer

Slowing down atoms using laser cooling, together with techniques like magnetic trapping and evaporative cooling, has led to numerous exciting results over the last decade [1], with the realization of Bose-Einstein condensation as the most spectacular achievement [2]. Laser-cooling schemes are applicable to atoms since closed multilevel systems can be realized and many consecutive absorptionemission cycles can be induced. This leads to a significant momentum transfer from the photons of the laser to the atom, resulting in a change of the velocity of the atom. There currently is a great interest in producing cold molecules for the study of cold molecule-molecule collisions, molecular quantum collective effects, Doppler-free spectroscopy, frequency standards, as well as many other applications already realized for atoms [3]. Slowing down of neutral molecules, a prerequisite for being able to trap them, has proven to be considerably more difficult to be achieved, however. The above-mentioned laser-cooling scheme cannot be applied to slow down molecules as no simple closed-level systems can be found; the unavoidable off-resonant radiative decay of molecules from the excited state to other vibrational levels in the electronic ground state hampers efficient momentum transfer [4]. Once molecules are present at sufficiently low kinetic energies, below a fraction of a cm21, they can be trapped in various ways. Trapping of neutral molecules in inhomogeneous magnetic [3] and electric fields [5] and trapping based on the use of evanescent fields close to the dielectricvacuum interface have been proposed [6]. It has also been suggested that extremely high laser powers might be used to induce a dipole moment in polarizable molecules, leading to trapping of these molecules in the laser beam [7]. Other methods to produce slow molecules have been put forward and have recently been successfully applied to produce the first samples of trapped molecules. By injecting molecules in a cold buffer gas, sufficiently low kinetic energies of the injected molecules can be obtained after thermalization that they can subsequently be trapped in an inhomogeneous magnetic field. This has recently been demonstrated for CaH injected in 3He buffer gas at temperatures of around 0.3 K [8]. Associative collisions between ultracold trapped atoms [9] have proven to be

•Jan 1, 1999•134 citations
The advent of the laser opened the way to the development of powerful new methods for manipulating and cooling atoms which were exploited in the realization of Bose–Einstein condensation in alkali atom vapours. To set the stage we describe a typical experiment, which is shown schematically in Fig. 4.1. A beam of sodium atoms emerges from an oven at a temperature of about 600 K, corresponding to a speed of about 800 m s –1 , and is then passed through a so-called Zeeman slower, in which the velocity of the atoms is reduced to about 30 m s –1 , corresponding to a temperature of about 1 K. In the Zeeman slower, a laser beam propagates in the direction opposite that of the atomic beam, and the radiation force produced by absorption of photons retards the atoms. Due to the Doppler effect, the frequency of the atomic transition in the laboratory frame is not generally constant, since the atomic velocity varies. However, by applying an inhomogeneous magnetic field designed so that the Doppler and Zeeman effects cancel, the frequency of the transition in the rest frame of the atom may be held fixed. On emerging from the Zeeman slower the atoms are slow enough to be captured by a magneto-optical trap (MOT), where they are further cooled by interactions with laser light to temperatures of order 100 μK. Another way of compensating for the changing Doppler shift is to increase the laser frequency in time, which is referred to as ‘chirping’. In other experiments the MOT is filled by transferring atoms from a second MOT where atoms are captured directly from the vapour.
The advent of the laser opened the way to the development of powerful methods for producing and manipulating cold atomic gases. To set the stage we describe a typical experiment, which is shown schematically in Fig. 4.1. A beam of sodium atoms emerges from an oven at a temperature of about 600 K, corresponding to a speed of about 800 m s −1 , and is then passed through a so-called Zeeman slower, in which the velocity of the atoms is reduced to about 30 m s −1 , corresponding to a temperature of about 1 K. In the Zeeman slower, a laser beam propagates in the direction opposite that of the atomic beam, and the radiation force produced by absorption of photons retards the atoms. Due to the Doppler effect, the frequency of the atomic transition in the laboratory frame is not generally constant, since the atomic velocity varies. However, by applying an inhomogeneous magnetic field designed so that the Doppler and Zeeman effects cancel, the frequency of the transition in the rest frame of the atom may be held fixed. On emerging from the Zeeman slower the atoms are slow enough to be captured by a magneto-optical trap (MOT), where they are further cooled by interactions with laser light to temperatures of order 100 μK. Another way of compensating for the changing Doppler shift is to increase the laser frequency in time, which is referred to as ‘chirping’.
The high velocity of free atoms associated with the thermal motion, together with the velocity distribution of atoms has imposed the ultimate limitation on the precision of ultrahigh resolution spectroscopy. A sample consisting of low velocity atoms would provide a substantial improvement in spectroscopy resolution. To overcome the problem of thermal motion, atomic physicists have pursued two goals; first, the reduction of the thermal motion (cooling); and second, the confinement of the atoms by means of electromagnetic fields (trapping). Cooling carried sufficiently far, eliminates the motional problems, whereas trapping allows for long observation times. In this work the laser cooling and trapping of an argon atomic beam will be discussed. The experiments involve a time-of-flight spectroscopy on metastable argon atoms. Laser deceleration or cooling of atoms is achieved by counter propagating a photon against an atomic beam of metastable atoms. The solution to the Doppler shift problem is achieved using spatially varying magnetic field along the beam path to Zeeman shift the atomic resonance frequency so as to keep the atoms in resonance with a fixed frequency cooling laser. For trapping experiments a Magnetooptical trap (MOT) will be used. The MOT is formed by three pairs of counter-propagating laser beams with mutual opposite circular polarization and a frequency tuned slightly below the center of the atomic resonance and superimposed on a magnetic quadrupole field.
Cooling and Trapping neutral particles or ions using laser beam becomes a new research field inPhysics. This field was started in 1970’s by Ashkin who demonstrated that a focused laser beam ondielectric particles in a glass cell can attract the particles to the focal area because the potenstialenergy there is lower. Cooling which means to reduce the average thermal velocity of atoms orparticles and trapping which means controlling the positions of the atoms can be performed using twokinds of forces from Laser beam i.e. scattering force and gradient force. A scattering force is resultedfrom the laser beam because the laser beam contains fotons which have momentum. The gradientforce appears because of the gradient of intensity around focal area. One of famous atom traps isMagneto-Optical Trap (MOT). MOT uses Doppler effect for cooling and Zeeman effect for trappingWith this technique, cold atoms with temperature in the order of mikro Kelvin can be produced. Coldatom can be used for many applications such as to make Bose Einstein Condensate (BEC), atominterfermetry and atomic clocks.
We present a simple review of the basic physical processes allowing one to control, with laser beams, the velocity and the position of neutral atoms. The control of the velocity corresponds to a cooling of atoms, that is, a reduction of the atomic velocity spread around a given value. The control of the position means a trapping of atoms in real space. The best present performances will be given, in terms of the lowest temperatures and the highest densities. The corresponding highest quantum degeneracy will also be estimated. It is imposed by fundamental limits, which will be described briefly. We also give the general trends in this field of research and outline the new directions which look promising for observing quantum statistical effects in laser cooled atomic samples, but which are for the moment restricted by unsolved problems. Introducing the Simple Schemes The radiative forces acting on atoms in a light field can be split into two parts, a reactive one and a dissipative one. The dissipative force (radiation pressure), which basically involves scattering processes, is velocity dependent. We will see that this dependence leads to the Doppler cooling scheme and to the concept of optical molasses, and we will give the corresponding minimal achievable temperature. The dissipative force can be made position dependent, through a gradient of the magnetic field, so that the atoms are also trapped in the so-called magneto-optical trap.
We have developed a new scheme to produce a dense trap of sodium atoms in the magneto-optical trap using the transition of F=1 to F'=0 states. In a conventional Zeeman slower a bias magnetic field is applied in the deceleration region to prevent the optical pumping to the F=1 state, so that sodium atoms interact with the cooling radiation of F=2 to F'=3. As a result, many of slow atoms in the F=2 state continue to decelerate adiabatically even at the exit of the solenoid and remain inside the magnetic field. However, slow atoms could be extracted outside the magnetic field, if they are transferred to the F=1 state by the optical pumping via the F'=2 state. Therefore, we reduced the strength of the bias magnetic field. We trapped the slow sodium atoms in the F=1 state directly in the magneto-optical trap.
Slowing down atoms using laser cooling, together with techniques like magnetic trapping and evaporative cooling, has led to numerous exciting results over the last decade [1], with the realization of Bose-Einstein condensation as the most spectacular achievement [2]. Laser-cooling schemes are applicable to atoms since closed multilevel systems can be realized and many consecutive absorptionemission cycles can be induced. This leads to a significant momentum transfer from the photons of the laser to the atom, resulting in a change of the velocity of the atom. There currently is a great interest in producing cold molecules for the study of cold molecule-molecule collisions, molecular quantum collective effects, Doppler-free spectroscopy, frequency standards, as well as many other applications already realized for atoms [3]. Slowing down of neutral molecules, a prerequisite for being able to trap them, has proven to be considerably more difficult to be achieved, however. The above-mentioned laser-cooling scheme cannot be applied to slow down molecules as no simple closed-level systems can be found; the unavoidable off-resonant radiative decay of molecules from the excited state to other vibrational levels in the electronic ground state hampers efficient momentum transfer [4]. Once molecules are present at sufficiently low kinetic energies, below a fraction of a cm21, they can be trapped in various ways. Trapping of neutral molecules in inhomogeneous magnetic [3] and electric fields [5] and trapping based on the use of evanescent fields close to the dielectricvacuum interface have been proposed [6]. It has also been suggested that extremely high laser powers might be used to induce a dipole moment in polarizable molecules, leading to trapping of these molecules in the laser beam [7]. Other methods to produce slow molecules have been put forward and have recently been successfully applied to produce the first samples of trapped molecules. By injecting molecules in a cold buffer gas, sufficiently low kinetic energies of the injected molecules can be obtained after thermalization that they can subsequently be trapped in an inhomogeneous magnetic field. This has recently been demonstrated for CaH injected in 3He buffer gas at temperatures of around 0.3 K [8]. Associative collisions between ultracold trapped atoms [9] have proven to be