Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

High-Q micro-resonators for trapping and detecting a single atom on a chip

Michael Rosenblit, Yonathan Japha, Péter Horák, R. Folman

Published Jan 1, 2007• 0 citations
OpenAlex

Abstract

Recent progress in the manufacturing of high Q dielectric microresonant structures enables their use as photonic devices that can manipulate and/or detect single atoms on a nanometer scale. Of specific interest is the wafer-based manufacturing of resonators where a good control of the physical characteristics can be achieved during fabrication and during operation, while at the same time allowing integration with other functions on the chip. We also discuss experimental feasibility and compare with first experiments in the field.

Related papers

High-Q photonic device for trapping and detecting a single atom on a chip

Michael Rosenblit, Yonathan Japha, Péter Horák +1 more

Recent progress in manufacturing high-Q dielectric microresonant structures may enable their use as photonic devices that can manipulate and/or detect single atoms on a nanometer scale. Of specific interest is the wafer-based manufacturing of resonators where good control of the physical characteristics can be achieved during fabrication and operation when integrated with other functions on the chip. We show that this "all-optical" trapping should be stable. We discuss atom detection efficiencies and the feasibility for non-destructive measurements in such systems and their dependence on key parameters such as atom distance from the surface, intensity of red- and blue-detuned laser pump fields, and disk size.

•Jan 1, 2006•0 citations

PROGRESS IN ATOM CHIPS AND THE INTEGRATION OF OPTICAL MICROCAVITIES

Edward A. Hinds, Michael Trupke, Benoît Darquié +2 more

We review recent progress at the Centre for Cold Matter in developing atom chips. An important advantage of miniaturizing atom traps on a chip is the possibility of obtaining very tight trapping structures with the capability of manipulating atoms on the micron length scale. We recall some of the pros and cons of bringing atoms close to the chip surface, as is required in order to make small static structures, and we discuss the relative merits of metallic, dielectric and superconducting chip surfaces. We point out that the addition of integrated optical devices on the chip can enhance its capability through single atom detection and controlled photon production. Finally, we review the status of integrated microcavities that have recently been demonstrated at our Centre and discuss their prospects for future development.

•Jan 1, 2008•0 citations

PROGRESS IN ATOM CHIPS AND THE INTEGRATION OF OPTICAL MICROCAVITIES

E. A. HINDS, M. TRUPKE, Benoît Darquié +2 more

We review recent progress at the Centre for Cold Matter in developing atom chips. An important advantage of miniaturizing atom traps on a chip is the possibility of obtaining very tight trapping structures with the capability of manipulating atoms on the micron length scale. We recall some of the pros and cons of bringing atoms close to the chip surface, as is required in order to make small static structures, and we discuss the relative merits of metallic, dielectric and superconducting chip surfaces. We point out that the addition of integrated optical devices on the chip can enhance its capability through single atom detection and controlled photon production. Finally, we review the status of integrated microcavities that have recently been demonstrated at our Centre and discuss their prospects for future development.

arXiv:0802.0987•Laser Spectroscopy•Apr 1, 2008•0 citations

Design and Fabrication of Ultrahigh Q Chip-Based Silica WGM Micro-resonators for Single-Atom Cavity-QED

Tal Ohana, Gabriel Guendelman, Eran Mishuk +5 more

Of the many applications of whispering-gallery mode (WGM) microresonators, Single-atom cavity-QED poses the most extreme demands on mode-volume and quality factor. Here we present a model-based procedure for the fabrication of small mode-volume ultrahigh Q silica WGM microresonators of varying geometries, from toroidal to micro-spheres. We experimentally demonstrate WGM resonators with ultra-high qualities as high as $1.7\times 10^8$ at 780nm. We present a theoretical model that allows tailoring the recipe to attain the desired geometry of the fabricated WGM microresonators.

arXiv:2408.08257•Aug 15, 2024•0 citations

Quantum information processing with atom chips

Jörg Schmiedmayer, R. Folman, Tommaso Calarco

Summary form only given. Neutral-atom manipulation using integrated micro-devices is a new extremely promising experimental approach to QIPC. In devices we call Atom Chips, atoms are trapped or move in microscopic potentials above a surface. The traps, guides, are formed by potentials created using electric, magnetic and light fields which originate in (microscopic) structures built on the surface of the Atom Chip. To execute a QIPC toolbox we plan to implement quantum optics techniques using integrated micro devices fabricated on the Atom Chip. We describe our recent experimental progress towards this goal, demonstrating the realisation of traps and guides for neutral atoms on a nanofabricated chip.

Quantum Electronics and Laser Science Conference•Jun 25, 2003•0 citations

Towards an integrated atom chip

G. Lewis

The field of atom chips is a relatively new area of research which is rapidly becoming of great interest to the scientific community. It started out as a small branch of cold atom physics which has quickly grown into a multidisciplinary\nsubject. It now encompasses topics from fundamental atomic and quantum theory, optics and laser science, to the engineering of ultra sensitive sensors.\n\nIn this thesis the first steps are taken towards a truly integrated atom chip device for real world applications. Multiple devices are presented that allow the trapping, cooling, manipulation and counting of atoms. Each device presents a new component required for the integration and miniaturisation of atom chips\ninto a single device, capable of being used as a sensor.\n\nInitially, a wire trap was created capable of trapping and splitting a cloud of BoseEinstein condensate (BEC) for use in atom interferometry. Using this chip a BEC has been successfully created, trapped and coherent splitting of this cloud has been achieved.\n\nSubsequently, the integration and simplification of the initial trapping process was approached. In all the experiments to date, atoms are initially collected from a warm vapour by a magneto-optical trap (MOT). This thesis presents a new approach in which microscopic pyramidal MOTs’ are integrated into the chip itself. This greatly reduces the number of optical components and helps to simplify the process significantly.\n\nAlso presented is a method for creating a planar-concave micro-cavity capable of single atom detection. One such cavity consists of a concave mirror fabricated in silicon and the planar tip of an optical fibre. The performance of the resonators\nis highly dependent on the surface roughness and shape profile of the concave mirrors therefore a detailed study into the fabrication technique and its effects on these parameters was undertaken. Using such cavities single atom detection has been shown to be possible. These cavities have also been sccessfully integrated into an atom wire guide.\n\nFinally a co-sputtered amorphous silicon/titanium (a-Si/Ti) nanocomposite material was created and studied for its use as a novel structural material. This material is potentially suitable for integrated circuitry (IC)/Micro-electromechanical-\nsystems (MEMS) integration. The material’s electrical and\nstructural properties were investigated and initial results suggest that a-Si/Ti has the potential to be a compelling structural material for future IC/MEMS integration.\n\nTo build all of these devices, a full range of standard microfabrication techniques was necessary as well as some non standard processes that required considerable process development such as the electrochemical deposition.\n\nThis thesis presents a tool box of fabrication techniques for creating various components capable of different tasks that can be integrated into a single device. Each component has been successfully demonstrated in laboratory conditions. This represents a significant step toward a real world atom chip device.

•Mar 1, 2009•0 citations
Recent progress in the manufacturing of high Q dielectric microresonant structures enables their use as photonic devices that can manipulate and/or detect single atoms on a nanometer scale. Of specific interest is the wafer-based manufacturing of resonators where a good control of the physical characteristics can be achieved during fabrication and during operation, while at the same time allowing integration with other functions on the chip. We also discuss experimental feasibility and compare with first experiments in the field.
Recent progress in manufacturing high-Q dielectric microresonant structures may enable their use as photonic devices that can manipulate and/or detect single atoms on a nanometer scale. Of specific interest is the wafer-based manufacturing of resonators where good control of the physical characteristics can be achieved during fabrication and operation when integrated with other functions on the chip. We show that this "all-optical" trapping should be stable. We discuss atom detection efficiencies and the feasibility for non-destructive measurements in such systems and their dependence on key parameters such as atom distance from the surface, intensity of red- and blue-detuned laser pump fields, and disk size.
We review recent progress at the Centre for Cold Matter in developing atom chips. An important advantage of miniaturizing atom traps on a chip is the possibility of obtaining very tight trapping structures with the capability of manipulating atoms on the micron length scale. We recall some of the pros and cons of bringing atoms close to the chip surface, as is required in order to make small static structures, and we discuss the relative merits of metallic, dielectric and superconducting chip surfaces. We point out that the addition of integrated optical devices on the chip can enhance its capability through single atom detection and controlled photon production. Finally, we review the status of integrated microcavities that have recently been demonstrated at our Centre and discuss their prospects for future development.
We review recent progress at the Centre for Cold Matter in developing atom chips. An important advantage of miniaturizing atom traps on a chip is the possibility of obtaining very tight trapping structures with the capability of manipulating atoms on the micron length scale. We recall some of the pros and cons of bringing atoms close to the chip surface, as is required in order to make small static structures, and we discuss the relative merits of metallic, dielectric and superconducting chip surfaces. We point out that the addition of integrated optical devices on the chip can enhance its capability through single atom detection and controlled photon production. Finally, we review the status of integrated microcavities that have recently been demonstrated at our Centre and discuss their prospects for future development.
Of the many applications of whispering-gallery mode (WGM) microresonators, Single-atom cavity-QED poses the most extreme demands on mode-volume and quality factor. Here we present a model-based procedure for the fabrication of small mode-volume ultrahigh Q silica WGM microresonators of varying geometries, from toroidal to micro-spheres. We experimentally demonstrate WGM resonators with ultra-high qualities as high as 1.7×1081.7\times 10^81.7×108 at 780nm. We present a theoretical model that allows tailoring the recipe to attain the desired geometry of the fabricated WGM microresonators.
Summary form only given. Neutral-atom manipulation using integrated micro-devices is a new extremely promising experimental approach to QIPC. In devices we call Atom Chips, atoms are trapped or move in microscopic potentials above a surface. The traps, guides, are formed by potentials created using electric, magnetic and light fields which originate in (microscopic) structures built on the surface of the Atom Chip. To execute a QIPC toolbox we plan to implement quantum optics techniques using integrated micro devices fabricated on the Atom Chip. We describe our recent experimental progress towards this goal, demonstrating the realisation of traps and guides for neutral atoms on a nanofabricated chip.
The field of atom chips is a relatively new area of research which is rapidly becoming of great interest to the scientific community. It started out as a small branch of cold atom physics which has quickly grown into a multidisciplinary\nsubject. It now encompasses topics from fundamental atomic and quantum theory, optics and laser science, to the engineering of ultra sensitive sensors.\n\nIn this thesis the first steps are taken towards a truly integrated atom chip device for real world applications. Multiple devices are presented that allow the trapping, cooling, manipulation and counting of atoms. Each device presents a new component required for the integration and miniaturisation of atom chips\ninto a single device, capable of being used as a sensor.\n\nInitially, a wire trap was created capable of trapping and splitting a cloud of BoseEinstein condensate (BEC) for use in atom interferometry. Using this chip a BEC has been successfully created, trapped and coherent splitting of this cloud has been achieved.\n\nSubsequently, the integration and simplification of the initial trapping process was approached. In all the experiments to date, atoms are initially collected from a warm vapour by a magneto-optical trap (MOT). This thesis presents a new approach in which microscopic pyramidal MOTs’ are integrated into the chip itself. This greatly reduces the number of optical components and helps to simplify the process significantly.\n\nAlso presented is a method for creating a planar-concave micro-cavity capable of single atom detection. One such cavity consists of a concave mirror fabricated in silicon and the planar tip of an optical fibre. The performance of the resonators\nis highly dependent on the surface roughness and shape profile of the concave mirrors therefore a detailed study into the fabrication technique and its effects on these parameters was undertaken. Using such cavities single atom detection has been shown to be possible. These cavities have also been sccessfully integrated into an atom wire guide.\n\nFinally a co-sputtered amorphous silicon/titanium (a-Si/Ti) nanocomposite material was created and studied for its use as a novel structural material. This material is potentially suitable for integrated circuitry (IC)/Micro-electromechanical-\nsystems (MEMS) integration. The material’s electrical and\nstructural properties were investigated and initial results suggest that a-Si/Ti has the potential to be a compelling structural material for future IC/MEMS integration.\n\nTo build all of these devices, a full range of standard microfabrication techniques was necessary as well as some non standard processes that required considerable process development such as the electrochemical deposition.\n\nThis thesis presents a tool box of fabrication techniques for creating various components capable of different tasks that can be integrated into a single device. Each component has been successfully demonstrated in laboratory conditions. This represents a significant step toward a real world atom chip device.